5x130 Bolt Pattern Wheels: Fitment Guide

The 5x130 bolt pattern (5x5.12 in inches) is used by 449 vehicles in our database: Porsche 911, Porsche Cayenne, Porsche Panamera, Mercedes-Benz G-Class and m

What 5x130 Means & What Uses It

5x130 means 5 wheel studs or bolts evenly spaced on a 130 mm (5.12") circle, written 5x5.12 in inches. In the ANKUSI fitment database it appears on 449 vehicle variants from 15 makes, model years 1963–2027.

Most common makes: Porsche (279), Bentley (69), Mercedes-Benz (24), TechArt (20), Audi (13), Lamborghini (9), SsangYong (9), Brabus (6).

Popular models on 5x130: Porsche 911, Porsche Cayenne, Porsche Panamera, Mercedes-Benz G-Class, Porsche Boxster, Bentley Continental, Bentley Flying Spur, TechArt Porsche.

Center bore is not the same across 5x130 vehicles: 71.6 mm (325 vehicles), 84.1 mm (30 vehicles), 71.5 mm (18 vehicles), 66.5 mm (8 vehicles). A wheel with the right bolt pattern but the wrong center bore will not seat on the hub — it needs to be machined to the exact bore or used with a hub-centric ring. Check the model page for your exact year before ordering.

Typical fastener: M14x1.5 Bolt.

ANKUSI currently lists 667 forged wheel designs drilled 5x130, and every design can be machined to 5x130 with your vehicle's exact center bore and offset, in 14–24 inch diameters.

5x130 Vehicles We Cover (461)

Porsche

Bentley

Mercedes-Benz

TechArt

Audi

Lamborghini

SsangYong

Brabus

Renault

Hamann

Rinspeed

Ram

Fisker

ABT

Mansory

Strosek

Eterniti

2013 Eterniti Artemis

Bolt pattern alone does not guarantee a correct fit — center bore, offset, and load rating still need to be confirmed per vehicle. Check our Fitment Verification Checklist before ordering, or send us your VIN or trim level and we will confirm it for you.

Vehicles Using 5x130 With a 71.6 mm Center Bore

In our database, 295 other vehicle entries from 10 makes use exactly the same 5x130 bolt pattern and 71.6 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.

5x130 is used by 5.8% of the vehicle pages in our English fitment guide (375 of 6,503); 78.7% of those also use a 71.6 mm center bore.

Hub-Centric Rings for a 71.6 mm Center Bore

A wheel with a center bore larger than 71.6 mm needs a hub-centric ring. The most common combinations:

Wheel bore	Ring size
72.6 mm	72.6 → 71.6 mm
73.1 mm	73.1 → 71.6 mm
74.1 mm	74.1 → 71.6 mm
76.1 mm	76.1 → 71.6 mm

ANKUSI forged wheels are bored to exactly 71.6 mm for this vehicle, so no ring is needed.

Sources and Last Update

Bolt pattern and center bore were checked against at least two independent fitment references before publication.

This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).

Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.

Last updated: 2026-08-22.

← Back to the Bolt Pattern & Wheel Size Guide · Browse by vehicle · Browse forged wheels