Red / Polished Deep Lip Directional Milled Forged Wheels
Deep Dish · Red / Polished
2006 Rinspeed Porsche Imola Cayman 987 Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Rinspeed Porsche Imola Cayman 987 wheels? This page gives the 2006 Rinspeed Porsche Imola Cayman 987 bolt pattern (5x130), centre bore, factory rim size and the offset range for aftermarket and forged Rinspeed Porsche Imola Cayman 987 rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2006 Rinspeed Porsche Imola Cayman 987 uses a 5x130 bolt pattern with a 71.6 mm centre bore. For aftermarket wheels, 20x9J ET40 front / 20x11J ET40 rear sits flush.
Forged wheels for the 2006 Rinspeed Porsche Imola Cayman 987 — drilled 5x130 with a 71.6 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Rinspeed Porsche Imola Cayman 987 (2006): 5x130 bolt pattern, 71.6mm center bore, OE F 20x8.5J ET45 / R 20x10J ET43. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x130
Center Bore71.6mm
Wheel Load Rating700–850 kg/wheel (Performance / Sports Car segment reference)
Year2006
Category5-Lug Performance / Tuner
Data check: the bolt pattern and center bore on this page have not yet been confirmed by a second independent source. Measure your hub or ask us before ordering. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Flush Fitment | F 20x9J ET40 / R 20x11J ET40 |
Forged Wheel Designs for the Rinspeed Porsche Imola Cayman 987
Every design below is forged to order, so it can be machined to the Rinspeed Porsche Imola Cayman 987's 5x130 bolt pattern and 71.6 mm center bore, with the width and offset calculated for your setup.
HRE-Style Champagne Mesh Forged Wheels
Monoblock · Champagne
Metallic Gray Split Forged Wheels
Monoblock · Metallic Gray
HRE Performance 522M-Style Brushed Silver Directional Milled Forged Wheels
Replica · Brushed Silver
Gloss Black Double-Ring Forged Wheels
Monoblock · Gloss Black
Gloss Black 5 Y-Spoke Forged Wheels
Monoblock · Gloss Black
Metallic Gray 5 W-Spoke Forged Wheels
Monoblock · Metallic Gray
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
A sedan's wheel spec is a balance point the factory tuned between ride comfort, steering feel, and everyday durability. Forging lets us hold that same structural margin while cutting rotational mass, which is where most of the real-world benefit — quicker steering response, marginally better ride — actually comes from.
The Rinspeed Porsche Imola Cayman 987 ships from the factory on a 5x130 bolt pattern with a 71.6mm center bore and a F 20x8.5J ET45 / R 20x10J ET43 wheel. Our flush reference for the Rinspeed Porsche Imola Cayman 987 is F 20x9J ET40 / R 20x11J ET40.; our maximum aggressive reference is F 20x9.5J ET35 / R 20x11.5J ET35. — beyond that, expect clearance issues against the fender liner without further modification.
Rinspeed Porsche Imola Cayman 987 OE Wheel Specs
The Rinspeed Porsche Imola Cayman 987 ships from the factory on 5x130 bolt pattern wheels with a 71.6mm center bore. The stock wheel size is F 20x8.5J ET45 / R 20x10J ET43, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Rinspeed Porsche Imola Cayman 987 (2006) we drill the 5x130 pattern and cut the centre bore to 71.6mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 20x8.5J | ET45 | 6.52 in (166 mm) | — | — |
| Flush | 20x9J | ET40 | 6.57 in (167 mm) | +1 mm | +11 mm |
| Maximum | 20x9.5J | ET35 | 6.63 in (168 mm) | +3 mm | +23 mm |
Vehicles With the Same Hub as the Rinspeed Porsche Imola Cayman 987 (5x130, 71.6 mm Bore)
In our database, 294 other vehicle entries from 10 makes use exactly the same 5x130 bolt pattern and 71.6 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x130 is used by 5.8% of the vehicle pages in our English fitment guide (375 of 6,503); 78.7% of those also use a 71.6 mm center bore.
Hub-Centric Rings for a 71.6 mm Center Bore
A wheel with a center bore larger than 71.6 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 72.6 mm | 72.6 → 71.6 mm |
| 73.1 mm | 73.1 → 71.6 mm |
| 74.1 mm | 74.1 → 71.6 mm |
| 76.1 mm | 76.1 → 71.6 mm |
ANKUSI forged wheels are bored to exactly 71.6 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Rinspeed Porsche Imola Cayman 987 use?
The 2006 Rinspeed Porsche Imola Cayman 987 uses a 5x130 bolt pattern.
How many lug bolts does the Rinspeed Porsche Imola Cayman 987 use?
The Rinspeed Porsche Imola Cayman 987 uses a 5-lug bolt pattern (5x130), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Rinspeed Porsche Imola Cayman 987?
The Rinspeed Porsche Imola Cayman 987's center bore is 71.6mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What does a flush wheel fitment look like on the Rinspeed Porsche Imola Cayman 987?
For a flush look with minimal to no rubbing, we recommend F 20x9J ET40 / R 20x11J ET40 as a starting point on a stock or mildly lowered Rinspeed Porsche Imola Cayman 987.
Do I need wheel spacers for my Rinspeed Porsche Imola Cayman 987?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Rinspeed Porsche Imola Cayman 987?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.57" backspacing up front and 7.57" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Rinspeed Porsche Imola Cayman 987?
Yes — the Rinspeed Porsche Imola Cayman 987's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.
Sources and Last Update
Data checked against: avtoreference.com, tirewheelguide.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 20x8.5 wheels · 20 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Bolt pattern and center bore on this page come from published fitment references and are still awaiting a second independent check. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.