EvoCorse Gloss White Custom Beadlock Forged Wheels
Off-Road Beadlock · Gloss White
2024 Porsche Macan 4 Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Porsche Macan 4 wheels? This page gives the 2024 Porsche Macan 4 bolt pattern (5x130), centre bore, factory rim size and the offset range for aftermarket and forged Porsche Macan 4 rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2024 Porsche Macan 4 uses a 5x130 bolt pattern with a 66.5 mm centre bore and M14x1.5 lug bolts. Factory wheels: F: 20x9J R: 20x10J. For aftermarket wheels, 21x9.5J ET45 front / 21x11J ET38 rear sits flush and 21x10J ET35 front / 21x11.5J ET30 rear is the most aggressive fit.
Forged wheels for the 2024 Porsche Macan 4 — drilled 5x130 with a 66.5 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Porsche Macan 4 (2024): 5x130 bolt pattern, 66.5mm center bore. Factory wheels: F: 20x9J R: 20x10J. Reference fitment ranges.
Bolt Pattern5x130
Wheel Bolt/NutM14x1.5 Bolt
Center Bore66.5mm
Wheel Load Rating800–950 kg/wheel (Electric Crossover segment reference, higher curb weight from battery pack)
Caliper TypeFixed 4-piston front caliper (OEM, Porsche Macan Electric)
Year2024
CategoryCrossover
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | F: 20x9J R: 20x10J |
| Flush Fitment | F 21x9.5J ET45 / R 21x11J ET38 |
| Maximum Aggressive | F 21x10J ET35 / R 21x11.5J ET30 |
Forged Wheel Designs for the Porsche Macan 4
Every design below is forged to order, so it can be machined to the Porsche Macan 4's 5x130 bolt pattern and 66.5 mm center bore, with the width and offset calculated for your setup.
Gloss Black Twisted-Blade Forged Wheels
Monoblock · Gloss Black
Matte Black 3-Spoke Disc Forged Wheels
Monoblock · Matte Black
Patsha Gloss Black / Gunmetal Double-Ring Forged Wheels
Replica · Gloss Black / Gunmetal
3SDM-Style Custom Finish Machined Face Forged Wheels
Monoblock · Custom Finish
HRE-Style Brushed Silver 5 Split-Spoke Forged Wheels
Replica · Mirror Polished Silver
Vossen HF-1-Style Satin Black Twin 5-Spoke Forged Wheels
Monoblock · Satin Black
BBS LM-Style Silver 2-Piece 10 Y-Spoke Forged Wheels
2-Piece · Silver
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
SUVs carry more curb weight higher off the ground, so wheel strength and rotational mass both matter more than on a comparable sedan — a heavier wheel amplifies body roll and slows steering response exactly where the platform is already working hardest. Forging keeps the wheel light without giving up the load rating the factory suspension geometry was tuned around.
The Porsche Macan 4 runs a 5x130 bolt pattern, 66.5mm center bore, and a F: 20x9J wheel from the factory. Our Flush Fitment reference is F 21x9.5J ET45 / R 21x11J ET38, which tucks the tire under the fender lip on a stock-height Porsche Macan 4. Our Maximum Aggressive reference is F 21x10J ET35 / R 21x11.5J ET30 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Porsche Macan 4 OE Wheel Specs
The 2024 Porsche Macan 4 (Crossover) uses a 5x130 bolt pattern with a 66.5mm center bore. Factory wheels are F: 20x9J R: 20x10J.
Why the factory spec works for most owners:
- Keeps unsprung weight low to preserve the factory handling balance
- Matches the wider, performance-oriented tire sizing typical of this platform
- Maintains clearance for the factory brake package and suspension geometry
- Balances grip with ride comfort for daily and spirited driving
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Porsche Macan 4 (2024) we drill the 5x130 pattern and cut the centre bore to 66.5mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Real-World Fitment Notes
The all-electric second-generation Macan (codename 5YA, built on the shared Porsche-Audi PPE platform) switched from the outgoing gasoline Macan's 5x112 bolt pattern to 5x130 — the same pattern used across current 911, Cayenne, Panamera and Taycan — so forged wheels can now share engineering across nearly the entire modern Porsche lineup except the old-platform gas Macan.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: F 20x9J ET48 → ~6.89″ F backspacing, R 20x10J ET40 → ~7.07″ R backspacing
- Flush: F 21x9.5J ET45 → ~7.02″ F backspacing, R 21x11J ET38 → ~7.5″ R backspacing
- Max: F 21x10J ET35 → ~6.88″ F backspacing, R 21x11.5J ET30 → ~7.43″ R backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Porsche spec, or want a wheel built to a custom offset for your Porsche Macan 4? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Vehicles With the Same Hub as the Porsche Macan 4 (5x130, 66.5 mm Bore)
In our database, 11 other vehicle entries from 2 makes use exactly the same 5x130 bolt pattern and 66.5 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x130 is used by 5.8% of the vehicle pages in our English fitment guide (375 of 6,503); 3.2% of those also use a 66.5 mm center bore.
Hub-Centric Rings for a 66.5 mm Center Bore
A wheel with a center bore larger than 66.5 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.6 mm | 66.6 → 66.5 mm |
| 67.1 mm | 67.1 → 66.5 mm |
| 70.1 mm | 70.1 → 66.5 mm |
| 70.5 mm | 70.5 → 66.5 mm |
| 73.1 mm | 73.1 → 66.5 mm |
ANKUSI forged wheels are bored to exactly 66.5 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Porsche Macan 4 use?
The 2024 Porsche Macan 4 uses a 5x130 bolt pattern.
How many lug bolts does the Porsche Macan 4 use?
The Porsche Macan 4 uses a 5-lug bolt pattern (5x130), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Porsche Macan 4?
The Porsche Macan 4's center bore is 66.5mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Porsche Macan 4?
Factory wheels on the Porsche Macan 4 are F: 20x9J R: 20x10J.
What is the biggest wheel size I can fit on my Porsche Macan 4 without rubbing?
The most aggressive fitment we recommend without fender work is F 21x10J ET35 / R 21x11.5J ET30. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Porsche Macan 4?
For a flush look with minimal to no rubbing, we recommend F 21x9.5J ET45 / R 21x11J ET38 as a starting point on a stock or mildly lowered Porsche Macan 4.
Do I need wheel spacers for my Porsche Macan 4?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Porsche Macan 4?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 7.02" backspacing up front and 7.5" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Porsche Macan 4?
Yes — the Porsche Macan 4's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 20x9 wheels · 20 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.