
2016 Porsche Cayman GT4 Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Porsche Cayman GT4 wheels? This page gives the 2016 Porsche Cayman GT4 bolt pattern (5x130), centre bore, factory rim size and the offset range for aftermarket and forged Porsche Cayman GT4 rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Porsche Cayman GT4 (2016): 5x130 bolt pattern, 71.6mm center bore. Factory wheels: F: 20x8.5J R: 20x11J. Reference fitment ranges.
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | F: 20x8.5J R: 20x11J |
| Flush Fitment | F 19x9J ET50 / R 19x11J ET46 |
| Maximum Aggressive | F 19x9J ET50 / R 19x11J ET46 |
Forged Wheel Designs for the Porsche Cayman GT4
Every design below is forged to order, so it can be machined to the Porsche Cayman GT4's 5x130 bolt pattern and 71.6 mm center bore, with the width and offset calculated for your setup.




Porsche OEM-Style Gunmetal 5-Spoke Petal Forged Wheels
Monoblock · Gunmetal

Transparent Copper 2-Piece Deep Lip Forged Wheels
2-Piece · Transparent Copper

Gold 5 Y-Spoke Forged Wheels
Monoblock · Gold

Porsche 911 Turbo S Forged Wheels
Monoblock

ECC Matte Black Forged Wheels
Replica · Matte Black
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.


ANKUSI Engineering Expert Advice
On a track-focused car the factory already spent the unsprung-weight budget carefully, so the aftermarket brief is narrow: same footprint, less mass, more barrel clearance for the brake package. Chasing poke on a car like this usually costs lap time before it buys looks.
The Porsche Cayman GT4 runs a 5x130 fitment, 71.6mm center bore, and a F: 20x8.5J wheel from the factory. Our Flush Fitment reference is F 19x9J ET50 / R 19x11J ET46, which tucks the tire under the fender lip on a stock-height Porsche Cayman GT4. Our Maximum Aggressive reference is F 19x9J ET50 / R 19x11J ET46 - the verified data does not support going wider than the flush spec on this chassis.
Porsche Cayman GT4 OE Wheel Specs
The 2016 Porsche Cayman GT4 (Track Sports Car) uses a 5x130 bolt pattern with a 71.6mm center bore. Factory wheels are F: 20x8.5J R: 20x11J.
Why the factory spec works for most owners:
- Keeps unsprung weight low to preserve the factory handling balance
- Matches the wider, performance-oriented tire sizing typical of this platform
- Maintains clearance for the factory brake package and suspension geometry
- Balances grip with ride comfort for daily and spirited driving
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Porsche Cayman GT4 (2016) we drill the 5x130 pattern and cut the centre bore to 71.6mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Real-World Fitment Notes
981 GT4 track builds run APEX VS-5RS/SM-10 19s, KW/Ohlins coilovers, Michelin Cup 2, motorsport toe links verified on APEX 981 Cayman GT4 guide; 18in wheels will not clear GT4 front brakes
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: F 20x8.5J ET61 → ~7.15″ F backspacing, R 20x11J ET50 → ~7.97″ R backspacing
- Flush: F 19x9J ET50 → ~6.97″ F backspacing, R 19x11J ET46 → ~7.81″ R backspacing
- Max: F 19x9J ET50 → ~6.97″ F backspacing, R 19x11J ET46 → ~7.81″ R backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Porsche spec, or want a wheel built to a custom offset for your Porsche Cayman GT4? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.