Bentley OEM-Style Gloss Black 5 V-Spoke Forged Wheels
Monoblock · Gloss Black
2026 Bentley Continental GT Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Bentley Continental GT wheels? This page gives the 2026 Bentley Continental GT bolt pattern (5x130), centre bore, factory rim size and the offset range for aftermarket and forged Bentley Continental GT rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2026 Bentley Continental GT uses a 5x130 bolt pattern with a 71.6 mm centre bore and M14x1.5 lug bolts. Factory wheels: F: 21x9.0J R: 21x10.5J. For aftermarket wheels, 22x10.0J ET30 front / 22x11.5J ET35 rear sits flush and 23x10.5J ET25 front / 23x12.0J ET30 rear is the most aggressive fit.
Forged wheels for the 2026 Bentley Continental GT — drilled 5x130 with a 71.6 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Bentley Continental GT (2026): 5x130 bolt pattern, 71.6mm center bore. Factory wheels: F: 21x9.0J R: 21x10.5J. Reference fitment ranges.
Bolt Pattern5x130
Wheel Bolt/NutM14x1.5 Bolt
Center Bore71.6mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Caliper TypeBrembo multi-piston fixed caliper, front & rear (OEM, standard across Bentley Continental/Flying Spur lineup)
Year2026
CategoryLuxury Coupe
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | F: 21x9.0J R: 21x10.5J |
| Flush Fitment | F 22x10.0J ET30 / R 22x11.5J ET35 |
| Maximum Aggressive | F 23x10.5J ET25 / R 23x12.0J ET30 |
Forged Wheel Designs for the Bentley Continental GT
Every design below is forged to order, so it can be machined to the Bentley Continental GT's 5x130 bolt pattern and 71.6 mm center bore, with the width and offset calculated for your setup.
ABL Studios-Style Gloss Black Multi-Spoke Double Ring Floating Cap Forged Wheels
Monoblock · Gloss Black
Black / Polished Forged Wheels
Monoblock · Black / Polished
Gloss Black Multi-Spoke Forged Wheels
Monoblock · Gloss Black
Forgiato-Style Mirror Polished Twin-Blade 5-Spoke 2-Piece Forged Wheels
2-Piece · Mirror Polished
Black / Machined Slotted Dish Forged Wheels
Monoblock · Black Machined
Forgiato-Style Mirror Polished Multi-Spoke Mesh 2-Piece Forged Wheels
2-Piece · Mirror Polished
See all Bentley Continental GT wheel designs Brixton-Style Forged Wheels
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
The Bentley Continental GT's chassis tuning assumes a certain amount of rotational mass at each corner. Forging lets ANKUSI cut that mass while matching the factory strength rating, which sharpens turn-in and reduces the energy the brakes have to absorb — a real gain on a coupe platform, not just a styling change.
The Bentley Continental GT runs a 5x130 bolt pattern, 71.6mm center bore, and a F: 21x9.0J wheel from the factory. Our Flush Fitment reference is F 22x10.0J ET30 / R 22x11.5J ET35, which tucks the tire under the fender lip on a stock-height Bentley Continental GT. Our Maximum Aggressive reference is F 23x10.5J ET25 / R 23x12.0J ET30 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Bentley Continental GT OE Wheel Specs
The 2026 Bentley Continental GT (Luxury Coupe) uses a 5x130 bolt pattern with a 71.6mm center bore. Factory wheels are F: 21x9.0J R: 21x10.5J.
Why the factory spec works for most owners:
- Preserves the factory-tuned ride and steering feel
- A mainstream size for this segment, keeping tire choice wide and prices reasonable
- Leaves full clearance for the stock brakes and suspension hardware
- Keeps handling predictable and consistent in everyday conditions
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Bentley Continental GT (2026) we drill the 5x130 pattern and cut the centre bore to 71.6mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: F 21x9.0J ET35 → ~6.38″ F backspacing, R 21x10.5J ET40 → ~7.32″ R backspacing
- Flush: F 22x10.0J ET30 → ~6.68″ F backspacing, R 22x11.5J ET35 → ~7.63″ R backspacing
- Max: F 23x10.5J ET25 → ~6.73″ F backspacing, R 23x12.0J ET30 → ~7.68″ R backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Bentley spec, or want a wheel built to a custom offset for your Bentley Continental GT? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Bentley Continental GT: Specs by Model Year
Vehicles With the Same Hub as the Bentley Continental GT (5x130, 71.6 mm Bore)
In our database, 294 other vehicle entries from 10 makes use exactly the same 5x130 bolt pattern and 71.6 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x130 is used by 5.8% of the vehicle pages in our English fitment guide (375 of 6,503); 78.7% of those also use a 71.6 mm center bore.
Hub-Centric Rings for a 71.6 mm Center Bore
A wheel with a center bore larger than 71.6 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 72.6 mm | 72.6 → 71.6 mm |
| 73.1 mm | 73.1 → 71.6 mm |
| 74.1 mm | 74.1 → 71.6 mm |
| 76.1 mm | 76.1 → 71.6 mm |
ANKUSI forged wheels are bored to exactly 71.6 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Bentley Continental GT use?
The 2026 Bentley Continental GT uses a 5x130 bolt pattern.
How many lug bolts does the Bentley Continental GT use?
The Bentley Continental GT uses a 5-lug bolt pattern (5x130), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Bentley Continental GT?
The Bentley Continental GT's center bore is 71.6mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Bentley Continental GT?
Factory wheels on the Bentley Continental GT are F: 21x9.0J R: 21x10.5J.
What is the biggest wheel size I can fit on my Bentley Continental GT without rubbing?
The most aggressive fitment we recommend without fender work is F 23x10.5J ET25 / R 23x12.0J ET30. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Bentley Continental GT?
For a flush look with minimal to no rubbing, we recommend F 22x10.0J ET30 / R 22x11.5J ET35 as a starting point on a stock or mildly lowered Bentley Continental GT.
Do I need wheel spacers for my Bentley Continental GT?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Bentley Continental GT?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.68" backspacing up front and 7.63" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Bentley Continental GT?
Yes — the Bentley Continental GT's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 21x9 wheels · 21 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.