Black / Machined 10 Y-Twin-Spoke Forged Wheels
Monoblock · Gloss Black / Machined
2020 Porsche Cayenne Coupe Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Porsche Cayenne Coupe wheels? This page gives the 2020 Porsche Cayenne Coupe bolt pattern (5x130), centre bore, factory rim size and the offset range for aftermarket and forged Porsche Cayenne Coupe rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Porsche Cayenne Coupe (2020): 5x130 bolt pattern, 71.6mm center bore. Factory wheels: F: 20x9J R: 20x10.5J. Reference fitment ranges.
Bolt Pattern5x130
Wheel Bolt/NutM14x1.5 Bolt
Center Bore71.6mm
Wheel Load Rating900–1250 kg/wheel (SUV segment reference)
Caliper TypeFixed 6-piston front caliper (OEM, Porsche)
Year2020
CategorySUV
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | F: 20x9J R: 20x10.5J |
| Flush Fitment | F 21x9.5J ET48 / R 21x11J ET52 |
| Maximum Aggressive | F 22x10J ET48 / R 22x11.5J ET61 |
Forged Wheel Designs for the Porsche Cayenne Coupe
Every design below is forged to order, so it can be machined to the Porsche Cayenne Coupe's 5x130 bolt pattern and 71.6 mm center bore, with the width and offset calculated for your setup.
BBS RS-Style Gold / Silver Deep Lip Forged Wheels
Deep Dish · Gold / Silver
Custom Finish 10 Y-Spoke Machined Face Forged Wheels
Monoblock · Custom Finish
Porsche OEM-Style Gunmetal 5 Twin-Spoke Forged Wheels
Monoblock · Gunmetal
Gloss Black 5 Split-Spoke Forged Wheels
Monoblock · Gloss Black
Black / Machined Petal Machined Face Forged Wheels
Monoblock · Black Machined
Forgiato-Style Mirror Polished Multi-Spoke Mesh 2-Piece Forged Wheels
2-Piece · Mirror Polished
HRE Side-Milled Silver 10-Spoke Forged Wheels
Replica · Side-milled Silver
See all Porsche Cayenne wheel designs Porsche OEM-Style Forged Wheels
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
On a vehicle this heavy, the wheel is a structural part before it is a styling part - it carries the load, the brake heat and the cornering forces all at once. A forged wheel buys back unsprung weight without giving up the load rating an SUV actually needs, which is the one number most cast aftermarket wheels quietly fall short on.
The Porsche Cayenne Coupe runs a 5x130 fitment, 71.6mm center bore, and a F: 20x9J wheel from the factory. Our Flush Fitment reference is F 21x9.5J ET48 / R 21x11J ET52, which tucks the tire under the fender lip on a stock-height Porsche Cayenne Coupe. Our Maximum Aggressive reference is F 22x10J ET48 / R 22x11.5J ET61 - beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Porsche Cayenne Coupe OE Wheel Specs
The 2020 Porsche Cayenne Coupe (SUV) uses a 5x130 bolt pattern with a 71.6mm center bore. Factory wheels are F: 20x9J R: 20x10.5J.
Why the factory spec works for most owners:
- Keeps unsprung weight low to preserve the factory handling balance
- Matches the wider, performance-oriented tire sizing typical of this platform
- Maintains clearance for the factory brake package and suspension geometry
- Balances grip with ride comfort for daily and spirited driving
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Porsche Cayenne Coupe (2020) we drill the 5x130 pattern and cut the centre bore to 71.6mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Real-World Fitment Notes
APEX and staggered 22x10/22x11.5 aftermarket sets are the documented owner path Cayenne ships steel / PSCB surface-coated / PCCB brakes - each larger caliper sits deeper in the barrel, so confirm spoke clearance for your brake package. 5x130 / M14x1.5. Verified at 9YA Cayenne platform level (APEX / Rennlist / Wheel-Size).
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: F 20x9J ET50 → ~6.97″ F backspacing, R 20x10.5J ET55 → ~7.92″ R backspacing
- Flush: F 21x9.5J ET48 → ~7.14″ F backspacing, R 21x11J ET52 → ~8.05″ R backspacing
- Max: F 22x10J ET48 → ~7.39″ F backspacing, R 22x11.5J ET61 → ~8.65″ R backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Porsche spec, or want a wheel built to a custom offset for your Porsche Cayenne Coupe? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Frequently Asked Questions
What bolt pattern (PCD) does the Porsche Cayenne Coupe use?
The 2020 Porsche Cayenne Coupe uses a 5x130 bolt pattern.
How many lug bolts does the Porsche Cayenne Coupe use?
The Porsche Cayenne Coupe uses a 5-lug bolt pattern (5x130), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Porsche Cayenne Coupe?
The Porsche Cayenne Coupe's center bore is 71.6mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Porsche Cayenne Coupe?
Factory wheels on the Porsche Cayenne Coupe are F: 20x9J R: 20x10.5J.
What is the biggest wheel size I can fit on my Porsche Cayenne Coupe without rubbing?
The most aggressive fitment we recommend without fender work is F 22x10J ET48 / R 22x11.5J ET61. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Porsche Cayenne Coupe?
For a flush look with minimal to no rubbing, we recommend F 21x9.5J ET48 / R 21x11J ET52 as a starting point on a stock or mildly lowered Porsche Cayenne Coupe.
Do I need wheel spacers for my Porsche Cayenne Coupe?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Porsche Cayenne Coupe?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 7.14" backspacing up front and 8.05" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Porsche Cayenne Coupe?
Yes — the Porsche Cayenne Coupe's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.