
BMW M3 G80 / Porsche 911 Forged Wheels
Bright Silver 5 Y-Spoke
293 fitment guides for Porsche, covering 1963 to 2027, spanning 4x108, 4x130, 5x112 and 5x130 bolt patterns. Browse the full list below, then open a model for bolt pattern, center bore, OE offset, flush and max wheel sizes, and offset/backspacing conversions.
Based on the 397 Porsche fitment guides we cover, we have documented 4 distinct bolt pattern / center bore combinations across different Porsche platforms and model years:
Do not mix platforms: a wheel forged for one Porsche bolt pattern / center bore combination will not hub-center correctly on a different one, even if the diameter looks right. Always confirm your exact model and year against the bolt pattern and center bore listed on that model page below before ordering — or send us your VIN or trim level and we will confirm it for you.
Offset and backspacing recommendations vary by trim even within the same bolt pattern, mainly due to differences in brake caliper size and suspension geometry between base and performance trims. Every ANKUSI wheel is forged to your exact target offset, so send us your Porsche model, year, and trim and we will confirm the correct spec before production — no guessing required.
The most common Porsche fitment in our guide is 5x130 with a 71.6 mm center bore (271 of 397 model years we cover).
Changing width or offset? Check how far the wheel moves in or out with our offset & backspacing calculator.
Forged-to-order wheel designs matched to Porsche bolt patterns. Every set is machined to your exact model, offset and center bore.

Bright Silver 5 Y-Spoke

Forged wheels for the Porsche 911 featuring the brox gloss white 15-spoke deep lip design, forged to order at ANKUSI's Guangzhou plant. Bolt pattern, centre bore, diameter, width and offset are machined for your exact vehicle — this listing covers 5-lug applications.

Porsche 911 / Panamera Fitment · 5-Lug

Porsche 911 / Cayenne Fitment · 5-Lug

Porsche 911 / M3 Fitment · 5-Lug

Brushed Silver Slotted Dish

Porsche 911 / M3 Fitment · 5-Lug

Porsche 911 / Panamera Fitment · 5-Lug
In our database, 84 other vehicle entries from 9 makes use exactly the same 5x130 bolt pattern and 71.6 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x130 is used by 5.8% of the vehicle pages in our English fitment guide (375 of 6,503); 78.7% of those also use a 71.6 mm center bore.
A wheel with a center bore larger than 71.6 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 72.6 mm | 72.6 → 71.6 mm |
| 73.1 mm | 73.1 → 71.6 mm |
| 74.1 mm | 74.1 → 71.6 mm |
| 76.1 mm | 76.1 → 71.6 mm |
ANKUSI forged wheels are bored to exactly 71.6 mm for this vehicle, so no ring is needed.
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.