
Porsche 911 / BMW M3 Forged Wheels
Black / Copper Concave
601 fitment guides for BMW, covering 1962 to 2027, spanning 4x100, 5x112, 5x120 and 5x132 bolt patterns. Browse the full list below, then open a model for bolt pattern, center bore, OE offset, flush and max wheel sizes, and offset/backspacing conversions.
Based on the 601 BMW fitment guides we cover, we have documented 6 distinct bolt pattern / center bore combinations across different BMW platforms and model years:
Do not mix platforms: a wheel forged for one BMW bolt pattern / center bore combination will not hub-center correctly on a different one, even if the diameter looks right. Always confirm your exact model and year against the bolt pattern and center bore listed on that model page below before ordering — or send us your VIN or trim level and we will confirm it for you.
Offset and backspacing recommendations vary by trim even within the same bolt pattern, mainly due to differences in brake caliper size and suspension geometry between base and performance trims. Every ANKUSI wheel is forged to your exact target offset, so send us your BMW model, year, and trim and we will confirm the correct spec before production — no guessing required.
The most common BMW fitment in our guide is 5x120 with a 72.6 mm center bore (291 of 601 model years we cover).
Changing width or offset? Check how far the wheel moves in or out with our offset & backspacing calculator.
Forged-to-order wheel designs matched to BMW bolt patterns. Every set is machined to your exact model, offset and center bore.

Black / Copper Concave

Porsche 911 / M3 Fitment · 5-Lug

BMW M3 CS Handschalter Fitment · 19-21in, 5x112

BMW M3 G80 / M4 G82 Fitment · 5-Lug

Mirror Polished 4-Petal · 5-Lug

Gold Mesh

Gloss Black Thin 10 Split-Spoke · 5-Lug

Matte Silver Fan Spoke Directional Milled
In our database, 91 other vehicle entries from 9 makes use exactly the same 5x120 bolt pattern and 72.6 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x120 is used by 10.3% of the vehicle pages in our English fitment guide (670 of 6,503); 50.6% of those also use a 72.6 mm center bore.
A wheel with a center bore larger than 72.6 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 73.1 mm | 73.1 → 72.6 mm |
| 74.1 mm | 74.1 → 72.6 mm |
| 76.1 mm | 76.1 → 72.6 mm |
| 78.1 mm | 78.1 → 72.6 mm |
ANKUSI forged wheels are bored to exactly 72.6 mm for this vehicle, so no ring is needed.
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.