Ram 1500 Off-Road Forged Wheels
Gloss Black Mesh · 5-Lug
2023 Ram ProMaster Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Ram ProMaster wheels? This page gives the 2023 Ram ProMaster bolt pattern (5x130), centre bore, factory rim size and the offset range for aftermarket and forged Ram ProMaster rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Ram ProMaster (2023): 5x130 bolt pattern, 78.1mm center bore. Factory wheels: 16x6J F/R. Flush and max fitment confirmed on request.
Bolt Pattern5x130
Wheel Bolt/NutBolt
Center Bore78.1mm
Wheel Load Rating700–850 kg/wheel (Performance / Sports Car segment reference)
Caliper TypeFactory disc brakes, all four corners (OEM)
Year2023
CategoryMPV
✓ Verified by ANKUSI's Engineering Team — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Forged wheels for the Ram ProMasterMachined to the 5x130 bolt pattern and 78.1 mm bore · 14–24 inch · offset calculated for your car · 3D drawing before production
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
On a performance-oriented coupe, the wheel is one of the few components where shaving weight has a compounding effect - less rotational mass means less work for the brakes, the drivetrain, and the chassis on every input. A forged wheel gets there without compromising the strength margin the factory engineered in.
We publish the factory specification for the Ram ProMaster below. We have not yet been able to verify aftermarket flush or maximum-aggressive offsets for this exact variant against a source we trust, so we are not listing any - an invented offset is worse than no offset when a wheel has to clear a caliper.
Ram ProMaster OE Wheel Specs
The 2023 Ram ProMaster (MPV) uses a 5x130 bolt pattern with a 78.1mm center bore. Factory wheels are 16x6J F/R.
Why the factory spec works for most owners:
- Keeps unsprung weight low to preserve the factory handling balance
- Matches the wider, performance-oriented tire sizing typical of this platform
- Maintains clearance for the factory brake package and suspension geometry
- Balances grip with ride comfort for daily and spirited driving
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Ram ProMaster (2023) we drill the 5x130 pattern and cut the centre bore to 78.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 6,436 vehicles, free to download, CC BY 4.0.
Aftermarket Fitment: Confirmed on Request
Published aftermarket fitment for this exact variant is still thin, so we have not committed to a flush or maximum-aggressive figure. Our engineering team is still collecting verified data for this variant. In the meantime the factory specification above is accurate and is the safe reference point for ordering.
What we do know: Generation Facelift, model years 2023-2026. Verified against two independent fitment references.
Need a wheel for this car now? Contact ANKUSI with your target diameter, width and offset and our engineers will confirm the correct forged spec against your brake package before anything is cut. You can also use our Offset & Backspacing Calculator to work through the numbers yourself.
Custom Forged Wheels for the Ram ProMaster (2023)
Everything above is reference data. If you want wheels actually built to it, that is what ANKUSI does: we are a forged wheel factory in Guangzhou, China, IATF 16949 and ISO 9001 certified, forging on our own 10,000-ton press and producing over 120,000 wheels a year. Forging blank, CNC machining, finishing, coating and inspection all happen in the same building — nothing is subcontracted and nothing is relabelled from another manufacturer.
Every set is cut to order, so the 5x130 pattern and the 78.1mm centre bore are machined for this car specifically rather than shimmed with adaptor rings. Diameter, width, offset, concavity, monoblock or multi-piece construction and the finish are all yours to choose.
Designs we already tool for the 5x130 pattern — each one is re-cut to your sizes and offsets:
Ram 1500 Classic Forged Wheels – Gloss Black Cutout Multi-Spoke (20in, 5x139.7)
Ram 1500 Off-Road Forged Wheels – Gloss Black Mesh (5-Lug)
Porsche 911 / 718 Cayman Forged Wheels – Chrome 5 W-Spoke
Brabus-Style Gloss Black 6 Y-Spoke Off-Road Forged Wheels – Mercedes-Benz G-Class W463 / G55 AMG Fitment (5-Lug)Frequently Asked Questions
What bolt pattern (PCD) does the Ram ProMaster use?
The 2023 Ram ProMaster uses a 5x130 bolt pattern.
How many lug bolts does the Ram ProMaster use?
The Ram ProMaster uses a 5-lug bolt pattern (5x130), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Ram ProMaster?
The Ram ProMaster's center bore is 78.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Ram ProMaster?
Factory wheels on the Ram ProMaster are 16x6J F/R.
Do I need wheel spacers for my Ram ProMaster?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Ram ProMaster?
The Ram ProMaster runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Vehicles With the Same Hub as the Ram ProMaster (5x130, 78.1 mm Bore)
No other make in our database pairs 5x130 with a 78.1 mm center bore, so wheels taken from other brands need a hub-centric ring or a custom bore.
5x130 is used by 5.8% of the vehicle entries in our database (372 of 6,396); 0.3% of those also use a 78.1 mm center bore.
Ram ProMaster: Specs by Model Year
| Year | Bolt pattern | Center bore | Factory wheel |
|---|---|---|---|
| 2013 | 5x130 | 78.1 mm | 16x6J |
| 2022 | 5x130 | 78.1 mm | 16x6J |
| 2023 | 5x130 | 78.1 mm | 16x6J |
| 2026 | 5x130 | 78.1 mm | 16x6J |
Bolt pattern and center bore stay the same across all 4 model years in our database (2013–2026).
Hub-Centric Rings for a 78.1 mm Center Bore
A wheel with a center bore larger than 78.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 84.1 mm | 84.1 → 78.1 mm |
| 93.1 mm | 93.1 → 78.1 mm |
| 100.1 mm | 100.1 → 78.1 mm |
| 106.1 mm | 106.1 → 78.1 mm |
ANKUSI forged wheels are bored to exactly 78.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 16x6 wheels · 16 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Forged Wheel Designs for the Ram ProMaster
Every design below is forged to order, so it can be machined to the Ram ProMaster's 5x130 bolt pattern and 78.1 mm center bore, with the width and offset calculated for your setup.
Ram 1500 Classic Forged Wheels
Gloss Black Cutout Multi-Spoke · 20in, 5x139.7
Brabus-Style Custom Finish 10-Spoke Carbon Fibre Forged Wheels
Mercedes-Benz G-Class / G55 AMG Fitment · 5-Lug
BMW M3 CS Handschalter Forged Wheels
Gloss White 10-Spoke · 19-21in, 5×112
Ram OEM-Style Chrome 5-Spoke Forged Wheels
Ram 1500 Classic Fitment · 5-Lug
HRE Performance Matte Silver 2-Piece Petal Forged Wheels - Porsche 911 / BMW M3 G80 Fitment (5-Lug)
HRE-Style forged wheels featuring the performance matte silver 2-piece petal design, forged to order at ANKUSI's Guangzhou plant. Bolt pattern, centre bore, diameter, width and offset are machined for your exact vehicle — this listing covers 5-lug applications.
Porsche 911 / BMW M3 Forged Wheels
Mirror Polished Silver 10-Spoke
Porsche 911 / BMW M3 Forged Wheels
Silver Turbine
Bolt pattern and center bore on this page were cross-checked against at least two independent sources before publication. Last reviewed 2026-10-10. Spotted an error? Email info@ankusi.com and we will verify and correct it.