APEX-Style Hyper Silver 5 Y-Spoke Forged Wheels
Monoblock · Hyper Silver
2004 Porsche Cayenne Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Porsche Cayenne wheels? This page gives the 2004 Porsche Cayenne bolt pattern (5x130), centre bore, factory rim size and the offset range for aftermarket and forged Porsche Cayenne rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2004 Porsche Cayenne uses a 5x130 bolt pattern with a 71.6 mm centre bore and M14x1.5 lug bolts. Factory wheels: 17x7.5J at ET53. For aftermarket wheels, 20x9J ET50 sits flush and 22x10J ET50 is the most aggressive fit.
Forged wheels for the 2004 Porsche Cayenne — drilled 5x130 with a 71.6 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Porsche Cayenne (2004): 5x130 bolt pattern, 71.6mm center bore. Factory wheels: 17x7.5J. Reference fitment ranges.
Bolt Pattern5x130
Wheel Bolt/NutM14x1.5 Bolt
Center Bore71.6mm
Wheel Load Rating900–1250 kg/wheel (SUV segment reference)
Year2004
CategorySUV
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Built to order by ANKUSI — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 17x7.5J at ET53 |
| Flush Fitment | 20x9J at ET50 offset |
| Maximum Aggressive | 22x10J at ET50 offset |
Forged Wheel Designs for the Porsche Cayenne
Every design below is forged to order, so it can be machined to the Porsche Cayenne's 5x130 bolt pattern and 71.6 mm center bore, with the width and offset calculated for your setup.
Porsche OEM-Style Matte Bronze 5 Y-Spoke Concave Forged Wheels
Replica · Matte Bronze
BBS-Style Brushed Silver 12-Spoke Polished-Lip Forged Wheels
2-Piece · Brushed Silver
Hyper Silver Multi-Spoke Forged Wheels
Monoblock · Hyper Silver
Silver 5-Spoke Forged Wheels
Monoblock · Silver
Wheelforce-Style Satin Blue Side-Milled Split 5-Spoke Forged Wheels
Monoblock · Satin Blue
BBS Silver Riveted Forged Wheels
Deep Dish · Silver
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Because an SUV's center of gravity is already higher than a sedan's, anything added at the corners — including wheel weight — has an outsized effect on handling balance. A forged wheel lets us hit the visual stance owners want without adding the rotational mass a cast wheel of the same strength would carry.
The Porsche Cayenne runs a 5x130 bolt pattern, 71.6mm center bore, and a 17x7.5J at ET53, front and rear, wheel from the factory. Our Flush Fitment reference is 20x9J ET50, which tucks the tire under the fender lip on a stock-height Porsche Cayenne. Our Maximum Aggressive reference is 22x10J ET50 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Porsche Cayenne OE Wheel Specs
The 2004 Porsche Cayenne (SUV) uses a 5x130 bolt pattern with a 71.6mm center bore. Factory wheels are 17x7.5J at ET53.
Why the factory spec works for most owners:
- Supports the vehicle's curb weight and load capacity
- Preserves ground clearance for everyday and light off-road use
- Balances ride comfort with cargo and passenger stability
- Maintains clearance for the factory suspension travel and brake package
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Porsche Cayenne (2004) we drill the 5x130 pattern and cut the centre bore to 71.6mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Flush Fitment
For a flush look with minimal rubbing, 20x9J ET50 is the recommended starting point on a stock or mildly lowered Porsche Cayenne.
Maximum Aggressive Fitment
22x10J ET50 is a more aggressive reference setup. Beyond this, expect rubbing under compression without fender rolling or camber correction.
Real-World Fitment Notes
VR Forged D07 18x9 ET20 (5x130) for overland, or 20-21in forged for street 955 Cayenne base; verified wheel-size.com/Rennlist 5x130 Cayenne 17x7.5J ET53 square, 5x130, CB71.6
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 17x7.5J ET53 → ~6.34″ backspacing
- Flush: 20x9J ET50 → ~6.97″ backspacing
- Max: 22x10J ET50 → ~7.47″ backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Porsche spec, or want a wheel built to a custom offset for your Porsche Cayenne? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Porsche Cayenne: Specs by Model Year
Vehicles With the Same Hub as the Porsche Cayenne (5x130, 71.6 mm Bore)
In our database, 290 other vehicle entries from 10 makes use exactly the same 5x130 bolt pattern and 71.6 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x130 is used by 5.8% of the vehicle pages in our English fitment guide (375 of 6,503); 78.7% of those also use a 71.6 mm center bore.
Hub-Centric Rings for a 71.6 mm Center Bore
A wheel with a center bore larger than 71.6 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 72.6 mm | 72.6 → 71.6 mm |
| 73.1 mm | 73.1 → 71.6 mm |
| 74.1 mm | 74.1 → 71.6 mm |
| 76.1 mm | 76.1 → 71.6 mm |
ANKUSI forged wheels are bored to exactly 71.6 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Porsche Cayenne use?
The 2004 Porsche Cayenne uses a 5x130 bolt pattern.
How many lug bolts does the Porsche Cayenne use?
The Porsche Cayenne uses a 5-lug bolt pattern (5x130), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Porsche Cayenne?
The Porsche Cayenne's center bore is 71.6mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Porsche Cayenne?
Factory wheels on the Porsche Cayenne are 17x7.5J at ET53.
What is the biggest wheel size I can fit on my Porsche Cayenne without rubbing?
The most aggressive fitment we recommend without fender work is 22x10J at ET50 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Porsche Cayenne?
For a flush look with minimal to no rubbing, we recommend 20x9J at ET50 offset as a starting point on a stock or mildly lowered Porsche Cayenne.
Do I need wheel spacers for my Porsche Cayenne?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Porsche Cayenne?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.97" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Porsche Cayenne?
The Porsche Cayenne runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 17x7.5 wheels · 17 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Bolt pattern and center bore on this page were cross-checked against at least two independent sources before publication. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.