83 fitment guides for Land Rover, covering 1970 to 2027, spanning 5x108, 5x114.3, 5x120 and 5x165.1 bolt patterns. Browse the full list below, then open a model for bolt pattern, center bore, OE offset, flush and max wheel sizes, and offset/backspacing conversions.
Based on the 83 Land Rover fitment guides we cover, we have documented 5 distinct bolt pattern / center bore combinations across different Land Rover platforms and model years:
Do not mix platforms: a wheel forged for one Land Rover bolt pattern / center bore combination will not hub-center correctly on a different one, even if the diameter looks right. Always confirm your exact model and year against the bolt pattern and center bore listed on that model page below before ordering — or send us your VIN or trim level and we will confirm it for you.
Offset and backspacing recommendations vary by trim even within the same bolt pattern, mainly due to differences in brake caliper size and suspension geometry between base and performance trims. Every ANKUSI wheel is forged to your exact target offset, so send us your Land Rover model, year, and trim and we will confirm the correct spec before production — no guessing required.
The most common Land Rover fitment in our guide is 5x120 with a 72.6 mm center bore (46 of 83 model years we cover).
Changing width or offset? Check how far the wheel moves in or out with our offset & backspacing calculator.
Forged-to-order wheel designs matched to Land Rover bolt patterns. Every set is machined to your exact model, offset and center bore.
Forgiato-Style forged wheels featuring the custom finish 2-piece multi-spoke design, forged to order at ANKUSI's Guangzhou plant. Bolt pattern, centre bore, diameter, width and offset are machined for your exact vehicle — this listing covers 5-lug applications.
Gunmetal Mesh
Land Rover Range Rover / Discovery Fitment · 5-Lug
Land Rover Range Rover / Discovery Fitment · 5-Lug
Satin Black Polished Lip 16-Spoke · 5-Lug
Jeep Wrangler / Defender Fitment · 5-Lug
Mirror Polished Mesh Beadlock · 5-Lug
Matte Black Round-Hole Full-Face
In our database, 296 other vehicle entries from 9 makes use exactly the same 5x120 bolt pattern and 72.6 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x120 is used by 10.3% of the vehicle pages in our English fitment guide (670 of 6,503); 50.6% of those also use a 72.6 mm center bore.
A wheel with a center bore larger than 72.6 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 73.1 mm | 73.1 → 72.6 mm |
| 74.1 mm | 74.1 → 72.6 mm |
| 76.1 mm | 76.1 → 72.6 mm |
| 78.1 mm | 78.1 → 72.6 mm |
ANKUSI forged wheels are bored to exactly 72.6 mm for this vehicle, so no ring is needed.
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.