5x127 Bolt Pattern Wheels: Fitment Guide

The 5x127 bolt pattern (5x5 in inches) is used by 114 vehicles in our database: Buick Lesabre, Cadillac Eldorado, Jeep Grand Cherokee, Jeep Wrangler and more.

What 5x127 Means & What Uses It

5x127 means 5 wheel studs or bolts evenly spaced on a 127 mm (5") circle, written 5x5 in inches. In the ANKUSI fitment database it appears on 114 vehicle variants from 8 makes, model years 1948–2027.

Most common makes: Jeep (44), Buick (27), Dodge (18), Cadillac (13), Chrysler (9), Chevrolet (1), Lancia (1), Startech (1).

Popular models on 5x127: Buick Lesabre, Cadillac Eldorado, Jeep Grand Cherokee, Jeep Wrangler, Chrysler Pacifica, Dodge Durango, Buick Roadmaster, Jeep Wrangler Unlimited.

Center bore is not the same across 5x127 vehicles: 71.5 mm (55 vehicles), 70.3 mm (21 vehicles), 78.1 mm (12 vehicles), 108 mm (8 vehicles). A wheel with the right bolt pattern but the wrong center bore will not seat on the hub — it needs to be machined to the exact bore or used with a hub-centric ring. Check the model page for your exact year before ordering.

Typical fastener: M12x1.5 Nut.

ANKUSI currently lists 95 forged wheel designs drilled 5x127, and every design can be machined to 5x127 with your vehicle's exact center bore and offset, in 14–24 inch diameters.

5x127 Forged Wheels

Forged to order in our Guangzhou factory with the 5x127 bolt pattern, your exact center bore, width and offset. From 0 per wheel.

Browse all forged wheel designs →

5x127 Vehicles We Cover (115)

Jeep

45

Buick

27

Dodge

18

Cadillac

13

Chrysler

9

Chevrolet

1

Lancia

1

Startech

1

Bolt pattern alone does not guarantee a correct fit — center bore, offset, and load rating still need to be confirmed per vehicle. Check our Fitment Verification Checklist before ordering, or send us your VIN or trim level and we will confirm it for you.

Vehicles Using 5x127 With a 71.5 mm Center Bore

In our database, 65 other vehicle entries from 5 makes use exactly the same 5x127 bolt pattern and 71.5 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.

5x127 is used by 1.3% of the vehicle pages in our English fitment guide (82 of 6,503); 79.3% of those also use a 71.5 mm center bore.

Hub-Centric Rings for a 71.5 mm Center Bore

A wheel with a center bore larger than 71.5 mm needs a hub-centric ring. The most common combinations:

Wheel boreRing size
71.6 mm71.6 → 71.5 mm
72.6 mm72.6 → 71.5 mm
73.1 mm73.1 → 71.5 mm
74.1 mm74.1 → 71.5 mm

ANKUSI forged wheels are bored to exactly 71.5 mm for this vehicle, so no ring is needed.

Sources and Last Update

Bolt pattern and center bore were checked against at least two independent fitment references before publication.

This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).

Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.

← Back to the Bolt Pattern & Wheel Size Guide · Browse by vehicle · Browse forged wheels

Contact WhatsApp Get a Quote