
Chevrolet Silverado HD / GMC Sierra 2500HD Beadlock Off-Road Forged Wheels
Machined Silver Multi-Spoke Gold-Bolt Ring · 8-Lug
299 fitment guides for Chevrolet, covering 1953 to 2027, spanning 4x100, 4x114.3, 5x100, 5x105, 5x110, 5x115, 5x120, 5x120.65, 5x127, 5x139.7, 6x120, 6x127, 6x132, 6x139.7, 8x165.1 and 8x180 bolt patterns. Browse the full list below, then open a model for bolt pattern, center bore, OE offset, flush and max wheel sizes, and offset/backspacing conversions.
Based on the 299 Chevrolet fitment guides we cover, we have documented 21 distinct bolt pattern / center bore combinations across different Chevrolet platforms and model years:
Do not mix platforms: a wheel forged for one Chevrolet bolt pattern / center bore combination will not hub-center correctly on a different one, even if the diameter looks right. Always confirm your exact model and year against the bolt pattern and center bore listed on that model page below before ordering — or send us your VIN or trim level and we will confirm it for you.
Offset and backspacing recommendations vary by trim even within the same bolt pattern, mainly due to differences in brake caliper size and suspension geometry between base and performance trims. Every ANKUSI wheel is forged to your exact target offset, so send us your Chevrolet model, year, and trim and we will confirm the correct spec before production — no guessing required.
The most common Chevrolet fitment in our guide is 5x120.65 with a 70.3 mm center bore (58 of 299 model years we cover).
Changing width or offset? Check how far the wheel moves in or out with our offset & backspacing calculator.
Forged-to-order wheel designs matched to Chevrolet bolt patterns. Every set is machined to your exact model, offset and center bore.

Machined Silver Multi-Spoke Gold-Bolt Ring · 8-Lug

Ford Mustang / Corvette C7 Fitment · 5-Lug

Chevrolet Silverado HD Fitment · 8-Lug

Ford F-250 Super Duty / Chevrolet Silverado 2500HD Fitment · 8-Lug

Ford Mustang / Chevrolet Corvette Fitment · 5-Lug

Ford Mustang / Chevrolet Corvette Fitment · 5-Lug

KMC-Style forged wheels featuring the wheels yellow design, forged to order at ANKUSI's Guangzhou plant. Bolt pattern, centre bore, diameter, width and offset are machined for your exact vehicle — this listing covers 6-lug applications.

Ford Mustang / Chevrolet Corvette Fitment · 5-Lug
In our database, 19 other vehicle entries from 5 makes use exactly the same 5x120.65 bolt pattern and 70.3 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x120.65 is used by 1.6% of the vehicle pages in our English fitment guide (101 of 6,503); 63.4% of those also use a 70.3 mm center bore.
A wheel with a center bore larger than 70.3 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 70.5 mm | 70.5 → 70.3 mm |
| 71.6 mm | 71.6 → 70.3 mm |
| 72.6 mm | 72.6 → 70.3 mm |
| 73.1 mm | 73.1 → 70.3 mm |
ANKUSI forged wheels are bored to exactly 70.3 mm for this vehicle, so no ring is needed.
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.