Audi Wheel Fitment Guide

331 fitment guides for Audi, covering 1968 to 2027, spanning 4x100, 4x108, 5x100, 5x112 and 5x130 bolt patterns. Browse the full list below, then open a model for bolt pattern, center bore, OE offset, flush and max wheel sizes, and offset/backspacing conversions.

Run a Audi club, forum or blog? Add our free bolt pattern and center bore lookup to your site, set to open on Audi only. Get the free embed code →

Audi Bolt Pattern & Center Bore Notes

Based on the 331 Audi fitment guides we cover, we have documented 8 distinct bolt pattern / center bore combinations across different Audi platforms and model years:

  • 5x112 bolt pattern, 66.5mm center bore — 158 models we cover, spanning 2008–2027.
  • 5x112 bolt pattern, 57.1mm center bore — 138 models we cover, spanning 1984–2027.
  • 5x100 bolt pattern, 57.1mm center bore — 14 models we cover, spanning 1999–2020.
  • 4x108 bolt pattern, 57.1mm center bore — 6 models we cover, spanning 1972–1992.
  • 5x130 bolt pattern, 71.6mm center bore — 6 models we cover, spanning 2009–2025.
  • 5x130 bolt pattern, 66.5mm center bore — 6 models we cover, spanning 2025.
  • 4x100 bolt pattern, 57.1mm center bore — 2 models we cover, spanning 1968–1974.
  • 5x130 bolt pattern, 73mm center bore — 1 model we cover, spanning 1993.

Do not mix platforms: a wheel forged for one Audi bolt pattern / center bore combination will not hub-center correctly on a different one, even if the diameter looks right. Always confirm your exact model and year against the bolt pattern and center bore listed on that model page below before ordering — or send us your VIN or trim level and we will confirm it for you.

Offset and backspacing recommendations vary by trim even within the same bolt pattern, mainly due to differences in brake caliper size and suspension geometry between base and performance trims. Every ANKUSI wheel is forged to your exact target offset, so send us your Audi model, year, and trim and we will confirm the correct spec before production — no guessing required.

How to check the bolt pattern on your Audi

The most common Audi fitment in our guide is 5x112 with a 66.5 mm center bore (158 of 331 model years we cover).

  1. Read the stamping on the back of an original wheel: size, offset (ET) and bolt pattern are usually cast into a spoke or the hub pad.
  2. No stamping? Measure center-to-center between two adjacent lug holes. For 5x112 that distance is 65.8 mm (PCD × sin(180° / 5)). A 2 mm difference already means a different bolt pattern.
  3. Match generation and year on the model pages below — the same nameplate can change bolt pattern or center bore between generations.

Changing width or offset? Check how far the wheel moves in or out with our offset & backspacing calculator.

5x112 / 66.5mm center bore

5x112 / 57.1mm center bore

R8 (32)

2010 Audi R8 V10 5.2 FSI quattro Wheels: 5x112 Bolt Pattern2011 Audi R8 GT Wheels: 5x112 Bolt Pattern, Offset & Rim Size2011 Audi R8 Spyder 4.2 FSI quattro Wheels: 5x112 Bolt Pattern2011 Audi R8 Spyder 5.2 FSI quattro Wheels: 5x112 Bolt Pattern2012 Audi R8 Exclusive Selection Wheels: 5x112 Bolt Pattern2012 Audi R8 GT Spyder Wheels: 5x112 Bolt Pattern & Offset2013 Audi R8 V10 Spyder Wheels: 5x112 Bolt Pattern & Offset2013 Audi R8 Wheels: 5x112 Bolt Pattern, Offset & Rim Size2015 Audi R8 LMX Wheels: 5x112 Bolt Pattern, Offset & Rim Size2015 Audi R8 LMX [UK] Wheels: 5x112 Bolt Pattern & Offset2015 Audi R8 competition Wheels: 5x112 Bolt Pattern & Offset2016 Audi R8 Coupe V10 plus 24h Wheels: 5x112 Bolt Pattern2016 Audi R8 V10 Wheels: 5x112 Bolt Pattern, Offset & Rim Size2016 Audi R8 V10 plus Wheels: 5x112 Bolt Pattern & Offset2016 Audi R8 e-tron Wheels: 5x112 Bolt Pattern & Offset2017 Audi R8 Coupe Audi Sport Edition Wheels (5x112)2017 Audi R8 Spyder V10 Wheels: 5x112 Bolt Pattern & Offset2017 Audi R8 performance parts Wheels: 5x112 Bolt Pattern2018 Audi R8 Spyder V10 RWS Wheels: 5x112 Bolt Pattern2018 Audi R8 Spyder V10 plus Wheels: 5x112 Bolt Pattern2018 Audi R8 V10 RWS Wheels: 5x112 Bolt Pattern & Offset2019 Audi R8 Coupe Wheels: 5x112 Bolt Pattern & Offset2019 Audi R8 Spyder Wheels: 5x112 Bolt Pattern & Offset2019 Audi R8 V10 Decennium Wheels: 5x112 Bolt Pattern & Offset2020 Audi R8 V10 RWD / Spyder (All) Wheels: 5x112 Bolt Pattern2021 Audi R8 RWD Panther Edition Wheels: 5x112 Bolt Pattern2022 Audi R8 Coupe [US] Wheels: 5x112 Bolt Pattern & Offset2022 Audi R8 V10 performance RWD Spyder Wheels (5x112)2022 Audi R8 V10 performance RWD Wheels: 5x112 Bolt Pattern2022 Audi R8 V10 performance RWD [UK] Wheels (5x112)2023 Audi R8 Coupe V10 GT RWD Wheels: 5x112 Bolt Pattern2023 Audi R8 Coupe V10 GT RWD [UK] Wheels: 5x112 Bolt Pattern

Forged Wheels for Audi

Forged-to-order wheel designs matched to Audi bolt patterns. Every set is machined to your exact model, offset and center bore.

Vehicles Using 5x112 With a 66.5 mm Center Bore

In our database, 23 other vehicle entries from 5 makes use exactly the same 5x112 bolt pattern and 66.5 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.

5x112 is used by 21.6% of the vehicle pages in our English fitment guide (1,407 of 6,503); 11.9% of those also use a 66.5 mm center bore.

Hub-Centric Rings for a 66.5 mm Center Bore

A wheel with a center bore larger than 66.5 mm needs a hub-centric ring. The most common combinations:

Wheel boreRing size
66.6 mm66.6 → 66.5 mm
67.1 mm67.1 → 66.5 mm
70.1 mm70.1 → 66.5 mm
70.5 mm70.5 → 66.5 mm
73.1 mm73.1 → 66.5 mm

ANKUSI forged wheels are bored to exactly 66.5 mm for this vehicle, so no ring is needed.

Sources and Last Update

Bolt pattern and center bore were checked against at least two independent fitment references before publication.

This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).

Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.

← Back to the full Fitment Guide · Browse forged wheels

Contact WhatsApp Get a Quote