Lamborghini Urus Performante Essenza (2023) Wheel Fitment
Lamborghini Urus Performante Essenza (2023): 5x130 bolt pattern, 71.5mm center bore, OE F 23x10J ET20 / R 23x11.5J ET22. Forged wheel fitment specs from ANKUSI.
✓ Verified by ANKUSI's Engineering Team — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Flush Fitment | F 23x10.5J ET15 / R 23x12J ET18 |
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
SUVs carry more curb weight higher off the ground, so wheel strength and rotational mass both matter more than on a comparable sedan — a heavier wheel amplifies body roll and slows steering response exactly where the platform is already working hardest. Forging keeps the wheel light without giving up the load rating the factory suspension geometry was tuned around.
The Lamborghini Urus Performante Essenza ships from the factory on a 5x130 bolt pattern with a 71.5mm center bore and a F 23x10J ET20 / R 23x11.5J ET22 wheel. Our flush reference for the Lamborghini Urus Performante Essenza is F 23x10.5J ET15 / R 23x12J ET18.; our maximum aggressive reference is F 24x10.5J ET12 / R 24x12J ET15. — beyond that, expect clearance issues against the fender liner without further modification.
Lamborghini Urus Performante Essenza OE Wheel Specs
The Lamborghini Urus Performante Essenza ships from the factory on 5x130 bolt pattern wheels with a 71.5mm center bore. The stock wheel size is F 23x10J ET20 / R 23x11.5J ET22, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
Flush Fitment
For a flush look without any body modification, most Lamborghini Urus Performante Essenza owners run F 23x10.5J ET15 / R 23x12J ET18. This setup tucks the wheel face closer to the fender lip while staying within safe load and clearance limits.
Maximum Aggressive Fitment
Owners chasing a more aggressive stance push to F 24x10.5J ET12 / R 24x12J ET15. Chassis: Steel springs (Performante specific), use lowering springs not links. Clearance should be verified before ordering, especially on lowered cars.
5-Tier Configuration Options
A – Factory-Style: 23x10J ET20
Recommended setup: Factory-matched forged replacement
Economy impact: None
Best for: Daily drivers, warranty-conscious owners
Appearance 5/10 | Comfort 10/10 | Install difficulty ★☆☆☆
Estimated cost range: $$ (OE replacement)
B – Comfortable Upgrade: F 23x10.5J ET18 / R 23x12J ET20
Recommended setup: Direct bolt-on, factory suspension
Economy impact: Minimal
Best for: Owners who want a mild upgrade with no compromise
Appearance 6/10 | Comfort 9/10 | Install difficulty ★☆☆☆
Estimated cost range: $$ - $$$
C – Balanced / Flush Fit: F 23x10.5J ET15 / R 23x12J ET18
Recommended setup: Flush forged wheels, stock or mild lowering
Economy impact: Slight increase
Best for: Enthusiasts wanting a flush look daily
Appearance 8/10 | Comfort 7/10 | Install difficulty ★★☆☆
Estimated cost range: $$$
D – Aggressive: F 23.5x10.5J ET14 / R 23.5x12J ET17
Recommended setup: Wider forged wheels, coilovers or lowering springs
Economy impact: Noticeable increase
Best for: Show-and-drive builds
Appearance 9/10 | Comfort 5/10 | Install difficulty ★★★☆
Estimated cost range: $$$$
E – Max Aggressive: F 24x10.5J ET12 / R 24x12J ET15
Recommended setup: Chassis: Steel springs (Performante specific), use lowering springs not links.
Economy impact: Significant increase
Best for: Show builds, weekend cars
Appearance 10/10 | Comfort 3/10 | Install difficulty ★★★★
Estimated cost range: $$$$$
Performance Comparison Matrix
| Wheel Spec | Tier A | Tier B | Tier C | Tier D | Tier E |
|---|---|---|---|---|---|
| Wheel Spec | 23x10J ET20 | F 23x10.5J ET18 / R 23x12J ET20 | F 23x10.5J ET15 / R 23x12J ET18 | F 23.5x10.5J ET14 / R 23.5x12J ET17 | F 24x10.5J ET12 / R 24x12J ET15 |
| Economy Impact | None | Minimal | Slight increase | Noticeable increase | Significant increase |
| Appearance | 5/10 | 6/10 | 8/10 | 9/10 | 10/10 |
| Comfort | 10/10 | 9/10 | 7/10 | 5/10 | 3/10 |
| Install Difficulty | ★☆☆☆ | ★☆☆☆ | ★★☆☆ | ★★★☆ | ★★★★ |
| Cost Range | $$ (OE replacement) | $$ - $$$ | $$$ | $$$$ | $$$$$ |
| Best For | Daily drivers, warranty-conscious owners | Owners who want a mild upgrade with no compromise | Enthusiasts wanting a flush look daily | Show-and-drive builds | Show builds, weekend cars |
Real-World Reference Cases
The following builds are compiled from typical ANKUSI customer configurations for this platform and are illustrative, not individually verified real-world builds.
Case 1: Daily Driver (Factory-Style)
Profile: Commuter prioritizing comfort and reliability.
Setup: F 23x10J ET20 / R 23x11.5J ET22 forged wheels, factory suspension.
Cost: $$ (OE replacement)
Outcome: No clearance issues, factory ride quality retained.
Case 2: Balanced Enthusiast (Balanced / Flush Fit)
Profile: Weekend driver wanting a flush stance without sacrificing daily usability.
Setup: F 23x10.5J ET15 / R 23x12J ET18 forged wheels.
Cost: $$$
Outcome: Flush fitment with acceptable ride comfort for daily use.
Case 3: Show Build (Max Aggressive)
Profile: Show-and-shine build prioritizing stance over comfort.
Setup: F 24x10.5J ET12 / R 24x12J ET15 forged wheels. Chassis: Steel springs (Performante specific), use lowering springs not links.
Cost: $$$$$
Outcome: Maximum aggressive stance; clearance verified case-by-case.
Decision Guide
Offset & Backspacing Reference
Backspacing is calculated as: wheel width (in) / 2 + offset (mm) / 25.4 + 0.5.
- OE 23x10J ET20: backspacing ≈ 6.29"
- Flush 23x10.5J ET15: backspacing ≈ 6.34"
- Max 24x10.5J ET12: backspacing ≈ 6.22"
Use our offset & backspacing calculator to fine-tune your fitment, or contact ANKUSI for a custom forged wheel quote for your Lamborghini Urus Performante Essenza.