Nissan Nismo Gloss White 5-Spoke Forged Wheels
Monoblock · Gloss White
2008 Porsche Cayenne Diesel Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Porsche Cayenne Diesel wheels? This page gives the 2008 Porsche Cayenne Diesel bolt pattern (5x130), centre bore, factory rim size and the offset range for aftermarket and forged Porsche Cayenne Diesel rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Porsche Cayenne Diesel (2008): 5x130 bolt pattern, 71.6mm center bore. Factory wheels: 17x7.5J F/R. Reference fitment ranges.
Bolt Pattern5x130
Wheel Bolt/NutM14x1.5 Bolt
Center Bore71.6mm
Wheel Load Rating900–1250 kg/wheel (SUV segment reference)
Caliper TypeFixed 6-piston front caliper (OEM, Porsche)
Year2008
CategorySUV
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 17x7.5J F/R |
| Flush Fitment | F 20x9J ET50 / R 20x9J ET50 |
| Maximum Aggressive | F 22x10J ET45 / R 22x10J ET45 |
Forged Wheel Designs for the Porsche Cayenne Diesel
Every design below is forged to order, so it can be machined to the Porsche Cayenne Diesel's 5x130 bolt pattern and 71.6 mm center bore, with the width and offset calculated for your setup.
Gloss Black 5 Split-Spoke Forged Wheels
Monoblock · Gloss Black
BBS-Style Bronze 5 Y-Spoke Forged Wheels
Monoblock · Bronze
APEX-Style Brushed Silver 5 Y-Spoke Forged Wheels
Monoblock · Brushed Silver
APEX-Style Matte Bronze 5 Y-Spoke Forged Wheels
Monoblock · Matte Bronze
HRE Performance Gloss Black 5-Spoke Forged Wheels
Replica · Gloss Black
Mirror Polished Silver 10 Y-Spoke Forged Wheels
Monoblock · Mirror Polished Silver
See all Porsche Cayenne wheel designs Porsche OEM-Style Forged Wheels
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
On a vehicle this heavy, the wheel is a structural part before it is a styling part - it carries the load, the brake heat and the cornering forces all at once. A forged wheel buys back unsprung weight without giving up the load rating an SUV actually needs, which is the one number most cast aftermarket wheels quietly fall short on.
The Porsche Cayenne Diesel runs a 5x130 fitment, 71.6mm center bore, and a F: 17x7.5J wheel from the factory. Our Flush Fitment reference is F 20x9J ET50 / R 20x9J ET50, which tucks the tire under the fender lip on a stock-height Porsche Cayenne Diesel. Our Maximum Aggressive reference is F 22x10J ET45 / R 22x10J ET45 - beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Porsche Cayenne Diesel OE Wheel Specs
The 2008 Porsche Cayenne Diesel (SUV) uses a 5x130 bolt pattern with a 71.6mm center bore. Factory wheels are 17x7.5J F/R.
Why the factory spec works for most owners:
- Keeps unsprung weight low to preserve the factory handling balance
- Matches the wider, performance-oriented tire sizing typical of this platform
- Maintains clearance for the factory brake package and suspension geometry
- Balances grip with ride comfort for daily and spirited driving
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Porsche Cayenne Diesel (2008) we drill the 5x130 pattern and cut the centre bore to 71.6mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Real-World Fitment Notes
22x10J ET45 square, 295/30-22 22in practical max; hubcentric rings if 74.1 bore; 5x130 71.5-71.6mm. Verified via wheel-size.com/Element Wheels/Rennlist 957.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: F 17x7.5J ET53 → ~6.34″ F backspacing, R 17x7.5J ET53 → ~6.34″ R backspacing
- Flush: F 20x9J ET50 → ~6.97″ F backspacing, R 20x9J ET50 → ~6.97″ R backspacing
- Max: F 22x10J ET45 → ~7.27″ F backspacing, R 22x10J ET45 → ~7.27″ R backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Porsche spec, or want a wheel built to a custom offset for your Porsche Cayenne Diesel? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Frequently Asked Questions
What bolt pattern (PCD) does the Porsche Cayenne Diesel use?
The 2008 Porsche Cayenne Diesel uses a 5x130 bolt pattern.
How many lug bolts does the Porsche Cayenne Diesel use?
The Porsche Cayenne Diesel uses a 5-lug bolt pattern (5x130), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Porsche Cayenne Diesel?
The Porsche Cayenne Diesel's center bore is 71.6mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Porsche Cayenne Diesel?
Factory wheels on the Porsche Cayenne Diesel are 17x7.5J F/R.
What is the biggest wheel size I can fit on my Porsche Cayenne Diesel without rubbing?
The most aggressive fitment we recommend without fender work is F 22x10J ET45 / R 22x10J ET45. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Porsche Cayenne Diesel?
For a flush look with minimal to no rubbing, we recommend F 20x9J ET50 / R 20x9J ET50 as a starting point on a stock or mildly lowered Porsche Cayenne Diesel.
Do I need wheel spacers for my Porsche Cayenne Diesel?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Porsche Cayenne Diesel?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.97" backspacing up front and 6.97" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Porsche Cayenne Diesel?
Yes — the Porsche Cayenne Diesel's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.