Black / Machined Slotted Dish Forged Wheels
Monoblock · Black Machined
2026 Bentley Bentayga Speed Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Bentley Bentayga Speed wheels? This page gives the 2026 Bentley Bentayga Speed bolt pattern (5x130), centre bore, factory rim size and the offset range for aftermarket and forged Bentley Bentayga Speed rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Bentley Bentayga Speed (2026): 5x130 bolt pattern, 71.5mm center bore. Factory wheels: 22x10.0J F/R. Reference fitment ranges.
Bolt Pattern5x130
Wheel Bolt/NutM14x1.5 Bolt
Center Bore71.5mm
Wheel Load Rating900–1250 kg/wheel (SUV segment reference)
Caliper TypeBrembo multi-piston fixed caliper, front & rear (OEM, standard across Bentley Continental/Flying Spur lineup)
Year2026
CategoryLuxury SUV
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 22x10.0J F/R |
| Flush Fitment | 23x10.5J at ET20 offset |
| Maximum Aggressive | 24x11.0J at ET15 offset |
Forged Wheel Designs for the Bentley Bentayga Speed
Every design below is forged to order, so it can be machined to the Bentley Bentayga Speed's 5x130 bolt pattern and 71.5 mm center bore, with the width and offset calculated for your setup.
Forgiato-Style Mirror Polished Twin-Blade 5-Spoke 2-Piece Forged Wheels
2-Piece · Mirror Polished
Brabus-Style Gunmetal / Machined Multi-Spoke Forged Wheels
Monoblock · Gunmetal / Machined
Matte Black 3-Spoke Disc Forged Wheels
Monoblock · Matte Black
Forgiato-Style Mirror Polished Multi-Spoke Mesh 2-Piece Forged Wheels
2-Piece · Mirror Polished
ABL Studios-Style Gloss Black Multi-Spoke Double Ring Floating Cap Forged Wheels
Monoblock · Gloss Black
Gloss Black Multi-Spoke Forged Wheels
Monoblock · Gloss Black
Bentley OEM-Style Gloss Black 5 V-Spoke Forged Wheels
Monoblock · Gloss Black
See all Bentley Bentayga wheel designs Mansory-Style Forged Wheels
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
SUVs carry more curb weight higher off the ground, so wheel strength and rotational mass both matter more than on a comparable sedan — a heavier wheel amplifies body roll and slows steering response exactly where the platform is already working hardest. Forging keeps the wheel light without giving up the load rating the factory suspension geometry was tuned around.
The Bentley Bentayga Speed runs a 5x130 bolt pattern, 71.5mm center bore, and a 22x10.0J, front and rear, wheel from the factory. Our Flush Fitment reference is 23x10.5J ET20, which tucks the tire under the fender lip on a stock-height Bentley Bentayga Speed. Our Maximum Aggressive reference is 24x11.0J ET15 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Bentley Bentayga Speed OE Wheel Specs
The 2026 Bentley Bentayga Speed (Luxury SUV) uses a 5x130 bolt pattern with a 71.5mm center bore. Factory wheels are 22x10.0J F/R.
Why the factory spec works for most owners:
- Balances ride comfort with everyday drivability
- A commonly used size for this vehicle class, supporting parts and tire availability
- Maintains clearance for the factory suspension and brake components
- Provides stable, predictable handling across normal driving conditions
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Bentley Bentayga Speed (2026) we drill the 5x130 pattern and cut the centre bore to 71.5mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 22x10.0J ET28 → ~6.6″ backspacing
- Flush: 23x10.5J ET20 → ~6.54″ backspacing
- Max: 24x11.0J ET15 → ~6.59″ backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Bentley spec, or want a wheel built to a custom offset for your Bentley Bentayga Speed? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Frequently Asked Questions
What bolt pattern (PCD) does the Bentley Bentayga Speed use?
The 2026 Bentley Bentayga Speed uses a 5x130 bolt pattern.
How many lug bolts does the Bentley Bentayga Speed use?
The Bentley Bentayga Speed uses a 5-lug bolt pattern (5x130), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Bentley Bentayga Speed?
The Bentley Bentayga Speed's center bore is 71.5mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Bentley Bentayga Speed?
Factory wheels on the Bentley Bentayga Speed are 22x10.0J F/R.
What is the biggest wheel size I can fit on my Bentley Bentayga Speed without rubbing?
The most aggressive fitment we recommend without fender work is 24x11.0J at ET15 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Bentley Bentayga Speed?
For a flush look with minimal to no rubbing, we recommend 23x10.5J at ET20 offset as a starting point on a stock or mildly lowered Bentley Bentayga Speed.
Do I need wheel spacers for my Bentley Bentayga Speed?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Bentley Bentayga Speed?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.54" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Bentley Bentayga Speed?
The Bentley Bentayga Speed runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.