HRE Transparent Gold 2-Piece Forged Wheels
2-Piece · Transparent Gold
2013 Porsche Panamera Platinum Edition Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Porsche Panamera Platinum Edition wheels? This page gives the 2013 Porsche Panamera Platinum Edition bolt pattern (5x130), centre bore, factory rim size and the offset range for aftermarket and forged Porsche Panamera Platinum Edition rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Porsche Panamera Platinum Edition (2013): 5x130 bolt pattern, 71.6mm center bore. Factory wheels: F: 19x9J R: 19x10J. Reference fitment ranges.
Bolt Pattern5x130
Wheel Bolt/NutM14x1.5 Bolt
Center Bore71.6mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Caliper TypeFixed 6-piston front caliper (OEM, Porsche)
Year2013
CategoryPerformance Sedan
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | F: 19x9J R: 19x10J |
| Flush Fitment | F 20x9.5J ET56 / R 20x11J ET56 |
| Maximum Aggressive | F 20x9.5J ET50 / R 20x11.5J ET48 |
Forged Wheel Designs for the Porsche Panamera Platinum Edition
Every design below is forged to order, so it can be machined to the Porsche Panamera Platinum Edition's 5x130 bolt pattern and 71.6 mm center bore, with the width and offset calculated for your setup.
APEX-Style Hyper Silver Mesh Polished Lip Forged Wheels
Monoblock · Hyper Silver
Gold Mesh Deep-Lip Forged Wheels
Deep Dish · Matte Gold
RUF-Style Brushed Silver 3-Spoke Classic Forged Wheels
Monoblock · Matte Silver
JXDL Purple 5 Y-Spoke Forged Wheels
Replica · Purple
Mansory-Style Gloss Black Machined Full-Face Forged Wheels
Monoblock · Gloss Black / Machined
Avant Garde-Style Gloss Black Mesh Forged Wheels
Monoblock · Gloss Black
See all Porsche Panamera wheel designs Porsche OEM-Style Forged Wheels
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
A big saloon lives or dies on ride quality, and the wheel is the first thing that ruins it. Going wider and lower without watching load rating and offset trades away exactly the composure you paid for. Forging lets you add diameter and width while keeping rotating mass close to the factory figure.
The Porsche Panamera Platinum Edition runs a 5x130 fitment, 71.6mm center bore, and a F: 19x9J wheel from the factory. Our Flush Fitment reference is F 20x9.5J ET56 / R 20x11J ET56, which tucks the tire under the fender lip on a stock-height Porsche Panamera Platinum Edition. Our Maximum Aggressive reference is F 20x9.5J ET50 / R 20x11.5J ET48 - beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Porsche Panamera Platinum Edition OE Wheel Specs
The 2013 Porsche Panamera Platinum Edition (Performance Sedan) uses a 5x130 bolt pattern with a 71.6mm center bore. Factory wheels are F: 19x9J R: 19x10J.
Why the factory spec works for most owners:
- Keeps unsprung weight low to preserve the factory handling balance
- Matches the wider, performance-oriented tire sizing typical of this platform
- Maintains clearance for the factory brake package and suspension geometry
- Balances grip with ride comfort for daily and spirited driving
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Porsche Panamera Platinum Edition (2013) we drill the 5x130 pattern and cut the centre bore to 71.6mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Real-World Fitment Notes
970 owners run 20-21in HRE/BBS with H&R springs or spacers; Rennlist 970 ET50-65 window verified data from 970 Panamera platform (Rennlist/wheel-size verified); Platinum Edition is trim/appearance pack on standard 970 chassis
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: F 19x9J ET60 → ~7.36″ F backspacing, R 19x10J ET63 → ~7.98″ R backspacing
- Flush: F 20x9.5J ET56 → ~7.45″ F backspacing, R 20x11J ET56 → ~8.2″ R backspacing
- Max: F 20x9.5J ET50 → ~7.22″ F backspacing, R 20x11.5J ET48 → ~8.14″ R backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Porsche spec, or want a wheel built to a custom offset for your Porsche Panamera Platinum Edition? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Frequently Asked Questions
What bolt pattern (PCD) does the Porsche Panamera Platinum Edition use?
The 2013 Porsche Panamera Platinum Edition uses a 5x130 bolt pattern.
How many lug bolts does the Porsche Panamera Platinum Edition use?
The Porsche Panamera Platinum Edition uses a 5-lug bolt pattern (5x130), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Porsche Panamera Platinum Edition?
The Porsche Panamera Platinum Edition's center bore is 71.6mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Porsche Panamera Platinum Edition?
Factory wheels on the Porsche Panamera Platinum Edition are F: 19x9J R: 19x10J.
What is the biggest wheel size I can fit on my Porsche Panamera Platinum Edition without rubbing?
The most aggressive fitment we recommend without fender work is F 20x9.5J ET50 / R 20x11.5J ET48. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Porsche Panamera Platinum Edition?
For a flush look with minimal to no rubbing, we recommend F 20x9.5J ET56 / R 20x11J ET56 as a starting point on a stock or mildly lowered Porsche Panamera Platinum Edition.
Do I need wheel spacers for my Porsche Panamera Platinum Edition?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Porsche Panamera Platinum Edition?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 7.45" backspacing up front and 8.2" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Porsche Panamera Platinum Edition?
Yes — the Porsche Panamera Platinum Edition's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.