HRE-Style Hyper Silver 10-Spoke Polished Deep Lip Forged Wheels
Deep Dish · Hyper Silver
2025 Mercedes-Benz G550 [US] Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Mercedes-Benz G550 [US] wheels? This page gives the 2025 Mercedes-Benz G550 [US] bolt pattern (5x130), centre bore, factory rim size and the offset range for aftermarket and forged Mercedes-Benz G550 [US] rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2025 Mercedes-Benz G550 [US] uses a 5x130 bolt pattern with a 84.1 mm centre bore and M14x1.5 lug bolts. Factory wheels: 20x8.5J, front and rear. For aftermarket wheels, 22x9.5J ET25 sits flush and 22x10.0J ET20 is the most aggressive fit.
Forged wheels for the 2025 Mercedes-Benz G550 [US] — drilled 5x130 with a 84.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Mercedes-Benz G550 [US] (2025): 5x130 bolt pattern, 84.1mm center bore. Factory wheels: 20x8.5J F/R. Reference fitment ranges.
Bolt Pattern5x130
Wheel Bolt/NutM14x1.5 Bolt
Center Bore84.1mm
Wheel Load Rating900–1250 kg/wheel (SUV segment reference)
Year2025
CategoryOff-Road SUV
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Built to order by ANKUSI — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 20x8.5J F/R |
| Flush Fitment | 22x9.5J at ET25 offset |
| Maximum Aggressive | 22x10.0J at ET20 offset |
Forged Wheel Designs for the Mercedes-Benz G550 [US]
Every design below is forged to order, so it can be machined to the Mercedes-Benz G550 [US]'s 5x130 bolt pattern and 84.1 mm center bore, with the width and offset calculated for your setup.
Lumma-Style Gunmetal 5 Y-Spoke Forged Wheels
Monoblock · Gunmetal
Brixton-Style Matte Black 10 Y-Spoke Gold Pinstripe Forged Wheels
Monoblock · Matte Black / Gold
Matte Black Petal Split-Spoke Forged Wheels
Monoblock · Matte Black
HRE-Style Transparent Gray 10 Y-Spoke Mesh Forged Wheels
Monoblock · Transparent Gray
APEX VS-5RS-Style Matte Bronze 5 Y-Spoke Forged Wheels
Monoblock · Matte Bronze
Advan-Style Gloss White 5-Spoke Forged Wheels
Monoblock · Gloss White
Mirror Polished 10-Spoke Forged Wheels
Monoblock · Mirror Polished
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
SUVs carry more curb weight higher off the ground, so wheel strength and rotational mass both matter more than on a comparable sedan — a heavier wheel amplifies body roll and slows steering response exactly where the platform is already working hardest. Forging keeps the wheel light without giving up the load rating the factory suspension geometry was tuned around.
The Mercedes-Benz G550 [US] runs a 5x130 bolt pattern, 84.1mm center bore, and a 20x8.5J, front and rear, wheel from the factory. Our Flush Fitment reference is 22x9.5J ET25, which tucks the tire under the fender lip on a stock-height Mercedes-Benz G550 [US]. Our Maximum Aggressive reference is 22x10.0J ET20 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Mercedes-Benz G550 [US] OE Wheel Specs
The 2025 Mercedes-Benz G550 [US] (Off-Road SUV) uses a 5x130 bolt pattern with a 84.1mm center bore. Factory wheels are 20x8.5J F/R.
Why the factory spec works for most owners:
- Supports the vehicle's curb weight and load capacity
- Preserves ground clearance for everyday and light off-road use
- Balances ride comfort with cargo and passenger stability
- Maintains clearance for the factory suspension travel and brake package
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Mercedes-Benz G550 [US] (2025) we drill the 5x130 pattern and cut the centre bore to 84.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Flush Fitment
For a flush look with minimal rubbing, F/R 22x9.5J ET25 is the recommended starting point on a stock or mildly lowered Mercedes-Benz G550 [US].
Maximum Aggressive Fitment
F/R 22x10.0J ET20 is a more aggressive reference setup. Beyond this, expect rubbing under compression without fender rolling or camber correction.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 20x8.5J ET35 → ~6.13″ backspacing
- Flush: 22x9.5J ET25 → ~6.23″ backspacing
- Max: 22x10.0J ET20 → ~6.29″ backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Mercedes-Benz spec, or want a wheel built to a custom offset for your Mercedes-Benz G550 [US]? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Vehicles With the Same Hub as the Mercedes-Benz G550 [US] (5x130, 84.1 mm Bore)
In our database, 34 other vehicle entries from 3 makes use exactly the same 5x130 bolt pattern and 84.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x130 is used by 5.8% of the vehicle pages in our English fitment guide (375 of 6,503); 9.3% of those also use a 84.1 mm center bore.
Hub-Centric Rings for a 84.1 mm Center Bore
A wheel with a center bore larger than 84.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 93.1 mm | 93.1 → 84.1 mm |
| 100.1 mm | 100.1 → 84.1 mm |
| 106.1 mm | 106.1 → 84.1 mm |
| 108.1 mm | 108.1 → 84.1 mm |
ANKUSI forged wheels are bored to exactly 84.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Mercedes-Benz G550 [US] use?
The 2025 Mercedes-Benz G550 [US] uses a 5x130 bolt pattern.
How many lug bolts does the Mercedes-Benz G550 [US] use?
The Mercedes-Benz G550 [US] uses a 5-lug bolt pattern (5x130), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Mercedes-Benz G550 [US]?
The Mercedes-Benz G550 [US]'s center bore is 84.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Mercedes-Benz G550 [US]?
Factory wheels on the Mercedes-Benz G550 [US] are 20x8.5J F/R.
What is the biggest wheel size I can fit on my Mercedes-Benz G550 [US] without rubbing?
The most aggressive fitment we recommend without fender work is 22x10.0J at ET20 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Mercedes-Benz G550 [US]?
For a flush look with minimal to no rubbing, we recommend 22x9.5J at ET25 offset as a starting point on a stock or mildly lowered Mercedes-Benz G550 [US].
Do I need wheel spacers for my Mercedes-Benz G550 [US]?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Mercedes-Benz G550 [US]?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.23" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Mercedes-Benz G550 [US]?
The Mercedes-Benz G550 [US] runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Wheel Installation Reference: Torque, Thread & TPMS
Thread & Fastener: M14x1.5, ball-seat lug bolt.
Factory Torque Spec: 150 Nm (110 ft-lb). SUV/crossover platforms (GLC/ML/GLE/GL/GLS and similar) generally use the longer 45mm bolt at this spec.
TPMS: TPMS (Tire Pressure Monitoring System) has been federally mandated on all new light vehicles sold in the US since the 2008 model year. If your wheels use OE-style sensors, have them transferred or cloned to the new wheels at installation.
Tire Pressure: Always set tire pressure to the value on your vehicle's tire placard (driver's doorjamb or glovebox), not the max PSI printed on the tire sidewall — this is trim- and tire-size-specific and stays the same reference point when you switch to a different wheel and tire combination.
Reference data compiled from published OEM service specifications and cross-checked against independent repair sources; always confirm against your owner's manual or door-jamb placard before installation.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 20x8.5 wheels · 20 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Bolt pattern and center bore on this page were cross-checked against at least two independent sources before publication. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.