BBS-Style Brushed Silver 12-Spoke Polished-Lip Forged Wheels
2-Piece · Brushed Silver
2021 Porsche Panamera Turbo S Executive Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Porsche Panamera Turbo S Executive wheels? This page gives the 2021 Porsche Panamera Turbo S Executive bolt pattern (5x130), centre bore, factory rim size and the offset range for aftermarket and forged Porsche Panamera Turbo S Executive rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Porsche Panamera Turbo S Executive (2021): 5x130 bolt pattern, 71.6mm center bore. Factory wheels: F: 21x9.5J R: 21x11.5J. Reference fitment ranges.
Bolt Pattern5x130
Wheel Bolt/NutM14x1.5 Bolt
Center Bore71.6mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Caliper TypeFixed 6-piston front caliper (OEM, Porsche Turbo)
Year2021
CategorySuper Wagon
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | F: 21x9.5J R: 21x11.5J |
| Flush Fitment | F 22x9.5J ET58 / R 22x11.5J ET60 |
| Maximum Aggressive | F 22x9.5J ET58 / R 22x11.5J ET60 |
Forged Wheel Designs for the Porsche Panamera Turbo S Executive
Every design below is forged to order, so it can be machined to the Porsche Panamera Turbo S Executive's 5x130 bolt pattern and 71.6 mm center bore, with the width and offset calculated for your setup.
BBS LM-Style Bright Silver 10 Y-Spoke Riveted Polished Forged Wheels
Deep Dish · Bright Silver
HRE P104SC-Style Mirror Polished Silver 5 V-Spoke Forged Wheels
Replica · Mirror Polished Silver
Gunmetal Multi-Spoke Forged Wheels
Monoblock · Gunmetal
Gloss Black White-Ring Forged Wheels
Monoblock · Gloss Black / White
HRE-Style Candy Red Mesh Multi-Spoke Forged Wheels
Monoblock · Transparent Candy Red
Hyper Silver Multi-Spoke Forged Wheels
Monoblock · Hyper Silver
Vossen-Style Brushed Silver 5-Spoke Black Ring Lip Forged Wheels
Monoblock · Brushed Silver / Black
See all Porsche Panamera wheel designs Porsche OEM-Style Forged Wheels
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
A big saloon lives or dies on ride quality, and the wheel is the first thing that ruins it. Going wider and lower without watching load rating and offset trades away exactly the composure you paid for. Forging lets you add diameter and width while keeping rotating mass close to the factory figure.
The Porsche Panamera Turbo S Executive runs a 5x130 fitment, 71.6mm center bore, and a F: 21x9.5J wheel from the factory. Our Flush Fitment reference is F 22x9.5J ET58 / R 22x11.5J ET60, which tucks the tire under the fender lip on a stock-height Porsche Panamera Turbo S Executive. Our Maximum Aggressive reference is F 22x9.5J ET58 / R 22x11.5J ET60 - the verified data does not support going wider than the flush spec on this chassis.
Porsche Panamera Turbo S Executive OE Wheel Specs
The 2021 Porsche Panamera Turbo S Executive (Super Wagon) uses a 5x130 bolt pattern with a 71.6mm center bore. Factory wheels are F: 21x9.5J R: 21x11.5J.
Why the factory spec works for most owners:
- Keeps unsprung weight low to preserve the factory handling balance
- Matches the wider, performance-oriented tire sizing typical of this platform
- Maintains clearance for the factory brake package and suspension geometry
- Balances grip with ride comfort for daily and spirited driving
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Porsche Panamera Turbo S Executive (2021) we drill the 5x130 pattern and cut the centre bore to 71.6mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Real-World Fitment Notes
Vossen HF-5, HRE and Avant Garde forged 22in staggered sets (e.g. forged 22x9.5 ET60 / 22x10.5 ET60) are the documented owner choice 5x130 / M14x1.5 ball-seat, 160Nm; conical-seat aftermarket wheels need conical bolts. Verified at 971 Turbo/Turbo S platform level (Rennlist / Wheel-Size / Vossen).
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: F 21x9.5J ET71 → ~8.05″ F backspacing, R 21x11.5J ET69 → ~8.97″ R backspacing
- Flush: F 22x9.5J ET58 → ~7.53″ F backspacing, R 22x11.5J ET60 → ~8.61″ R backspacing
- Max: F 22x9.5J ET58 → ~7.53″ F backspacing, R 22x11.5J ET60 → ~8.61″ R backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Porsche spec, or want a wheel built to a custom offset for your Porsche Panamera Turbo S Executive? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Frequently Asked Questions
What bolt pattern (PCD) does the Porsche Panamera Turbo S Executive use?
The 2021 Porsche Panamera Turbo S Executive uses a 5x130 bolt pattern.
How many lug bolts does the Porsche Panamera Turbo S Executive use?
The Porsche Panamera Turbo S Executive uses a 5-lug bolt pattern (5x130), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Porsche Panamera Turbo S Executive?
The Porsche Panamera Turbo S Executive's center bore is 71.6mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Porsche Panamera Turbo S Executive?
Factory wheels on the Porsche Panamera Turbo S Executive are F: 21x9.5J R: 21x11.5J.
What is the biggest wheel size I can fit on my Porsche Panamera Turbo S Executive without rubbing?
The most aggressive fitment we recommend without fender work is F 22x9.5J ET58 / R 22x11.5J ET60. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Porsche Panamera Turbo S Executive?
For a flush look with minimal to no rubbing, we recommend F 22x9.5J ET58 / R 22x11.5J ET60 as a starting point on a stock or mildly lowered Porsche Panamera Turbo S Executive.
Do I need wheel spacers for my Porsche Panamera Turbo S Executive?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Porsche Panamera Turbo S Executive?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 7.53" backspacing up front and 8.61" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Porsche Panamera Turbo S Executive?
Yes — the Porsche Panamera Turbo S Executive's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.