
2009 Porsche Cayman S Sport Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Porsche Cayman S Sport wheels? This page gives the 2009 Porsche Cayman S Sport bolt pattern (5x130), centre bore, factory rim size and the offset range for aftermarket and forged Porsche Cayman S Sport rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Porsche Cayman S Sport (2009): 5x130 bolt pattern, 71.6mm center bore. Factory wheels: F: 19x8J R: 19x9.5J. Reference fitment ranges.
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | F: 19x8J R: 19x9.5J |
| Flush Fitment | F 19x8.5J ET45 / R 19x10J ET42 |
| Maximum Aggressive | F 19x8.5J ET45 / R 19x10.5J ET40 |
Forged Wheel Designs for the Porsche Cayman S Sport
Every design below is forged to order, so it can be machined to the Porsche Cayman S Sport's 5x130 bolt pattern and 71.6 mm center bore, with the width and offset calculated for your setup.


APEX-Style Matte Silver Mesh Deep-Lip Forged Wheels
Deep Dish · Matte Silver

Porsche OEM-Style Matte Black 5 Split-Spoke Forged Wheels
Monoblock · Gloss Black

Gloss Black 5 Y-Spoke Concave Forged Wheels
Concave · Gloss Black

OZ Racing-Style Gloss Black Multi-Spoke Forged Wheels
Monoblock · Gloss Black

Metallic Gray Split Directional Milled Forged Wheels
Monoblock · Metallic Gray

HRE P101-Style Gold 5 Y-Spoke Forged Wheels
Replica · Gold

Black / Machined Directional Milled Machined Face Forged Wheels
Monoblock · Black Machined
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.


ANKUSI Engineering Expert Advice
On a performance-oriented coupe, the wheel is one of the few components where shaving weight has a compounding effect - less rotational mass means less work for the brakes, the drivetrain, and the chassis on every input. A forged wheel gets there without compromising the strength margin the factory engineered in.
The Porsche Cayman S Sport runs a 5x130 fitment, 71.6mm center bore, and a F: 19x8J wheel from the factory. Our Flush Fitment reference is F 19x8.5J ET45 / R 19x10J ET42, which tucks the tire under the fender lip on a stock-height Porsche Cayman S Sport. Our Maximum Aggressive reference is F 19x8.5J ET45 / R 19x10.5J ET40 - beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Porsche Cayman S Sport OE Wheel Specs
The 2009 Porsche Cayman S Sport (Sports Coupe) uses a 5x130 bolt pattern with a 71.6mm center bore. Factory wheels are F: 19x8J R: 19x9.5J.
Why the factory spec works for most owners:
- Keeps unsprung weight low to preserve the factory handling balance
- Matches the wider, performance-oriented tire sizing typical of this platform
- Maintains clearance for the factory brake package and suspension geometry
- Balances grip with ride comfort for daily and spirited driving
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Porsche Cayman S Sport (2009) we drill the 5x130 pattern and cut the centre bore to 71.6mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Real-World Fitment Notes
platform-verified 987 setup 19x8.5J ET47 & 19x10J ET43 (data from 987 Cayman/Boxster platform; no independent S Sport-specific build on file) 987 chassis; mid-engine; 5x130 71.6mm; verify clearance. Verified via 987 platform community data.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: F 19x8J ET57 → ~6.74″ F backspacing, R 19x9.5J ET46 → ~7.06″ R backspacing
- Flush: F 19x8.5J ET45 → ~6.52″ F backspacing, R 19x10J ET42 → ~7.15″ R backspacing
- Max: F 19x8.5J ET45 → ~6.52″ F backspacing, R 19x10.5J ET40 → ~7.32″ R backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Porsche spec, or want a wheel built to a custom offset for your Porsche Cayman S Sport? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.