Gunmetal 5 Split-Spoke 2-Piece Polished Deep Lip Forged Wheels
2-Piece · Gunmetal
2017-2021 Porsche Panamera Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Porsche Panamera wheels? This page gives the 2017-2021 Porsche Panamera bolt pattern (5x130), centre bore, factory rim size and the offset range for aftermarket and forged Porsche Panamera rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2017-2021 Porsche Panamera uses a 5x130 bolt pattern with a 71.6 mm centre bore and M14x1.5 lug bolts. Factory wheels: F: 19x9.0J R: 19x10.5J. For aftermarket wheels, 19x9.0J ET48 front / 19x10.5J ET51 rear sits flush and 19x9.0J ET45 front / 19x10.5J ET45 rear is the most aggressive fit.
Forged wheels for the 2017-2021 Porsche Panamera — drilled 5x130 with a 71.6 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Porsche Panamera (2017-2021): 5x130 bolt pattern, 71.6mm center bore. Factory wheels: F: 19x9.0J R: 19x10.5J. Reference fitment ranges.
Bolt Pattern5x130
Wheel Bolt/NutM14x1.5 Bolt
Center Bore71.6mm
Wheel Load Rating748–863 kg/wheel (Standard Passenger Car segment reference)
Year2017-2021
CategoryPHEV Wagon
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Built to order by ANKUSI — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | F: 19x9.0J R: 19x10.5J |
| Flush Fitment | F 19x9.0J ET48 / R 19x10.5J ET51 |
| Maximum Aggressive | F 19x9.0J ET45 / R 19x10.5J ET45 |
Forged Wheel Designs for the Porsche Panamera
Every design below is forged to order, so it can be machined to the Porsche Panamera's 5x130 bolt pattern and 71.6 mm center bore, with the width and offset calculated for your setup.
Rays-Style Chrome 5-Spoke Deep-Lip Forged Wheels
Monoblock · Chrome
Mirror Polished Twisted 10-Spoke Forged Wheels
Deep Dish · Matte Silver
Bronze 10-Spoke Forged Wheels
Monoblock · Bronze
Porsche OEM-Style Matte Black 5-Spoke Forged Wheels
Monoblock · Matte Black
Porsche OEM-Style Silver / Black 10 Y-Spoke Mesh Beadlock Forged Wheels
Off-Road Beadlock · Silver
HRE P101-Style Metallic Gray 5 V-Spoke Forged Wheels
Replica · Metallic Gray
Gunmetal 5 Y-Spoke Forged Wheels
Monoblock · Gunmetal
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Wagons split the difference between sedan agility and load-carrying duty, and the wheels have to serve both roles. A forged wheel holds the same structural margin as the factory piece while trimming rotational weight, which benefits both the empty-car handling and the loaded-car ride.
The Porsche Panamera runs a 5x130 bolt pattern, 71.6mm center bore, and a F: 19x9.0J wheel from the factory. Our Flush Fitment reference is F 19x9.0J ET48 / R 19x10.5J ET51, which tucks the tire under the fender lip on a stock-height Porsche Panamera. Our Maximum Aggressive reference is F 19x9.0J ET45 / R 19x10.5J ET45 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Porsche Panamera OE Wheel Specs
The 2017-2021 Porsche Panamera (PHEV Wagon) uses a 5x130 bolt pattern with a 71.6mm center bore. Factory wheels are F: 19x9.0J R: 19x10.5J.
Why the factory spec works for most owners:
- Balances ride comfort with everyday fuel efficiency
- A widely used size in this segment, so tire and wheel availability stays strong
- Keeps unsprung weight low for stable, predictable handling
- Maintains clearance for the factory brake calipers and suspension components
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Porsche Panamera (2017-2021) we drill the 5x130 pattern and cut the centre bore to 71.6mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Flush Fitment
For a flush look, F 19x9.0J ET48 / R 19x10.5J ET51 is a commonly used starting point — clearance must be verified on a stock or mildly lowered Porsche Panamera.
Maximum Aggressive Fitment
F 19x9.0J ET45 / R 19x10.5J ET45 is a more aggressive reference setup. Beyond this, expect rubbing under compression without fender rolling or camber correction.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: F 19x9.0J ET71 → ~7.8″ F backspacing, R 19x10.5J ET71 → ~8.55″ R backspacing
- Flush: F 19x9.0J ET48 → ~6.89″ F backspacing, R 19x10.5J ET51 → ~7.76″ R backspacing
- Max: F 19x9.0J ET45 → ~6.77″ F backspacing, R 19x10.5J ET45 → ~7.52″ R backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Porsche spec, or want a wheel built to a custom offset for your Porsche Panamera? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Porsche Panamera: Specs by Model Year
Vehicles With the Same Hub as the Porsche Panamera (5x130, 71.6 mm Bore)
In our database, 292 other vehicle entries from 10 makes use exactly the same 5x130 bolt pattern and 71.6 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x130 is used by 5.8% of the vehicle pages in our English fitment guide (375 of 6,503); 78.7% of those also use a 71.6 mm center bore.
Hub-Centric Rings for a 71.6 mm Center Bore
A wheel with a center bore larger than 71.6 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 72.6 mm | 72.6 → 71.6 mm |
| 73.1 mm | 73.1 → 71.6 mm |
| 74.1 mm | 74.1 → 71.6 mm |
| 76.1 mm | 76.1 → 71.6 mm |
ANKUSI forged wheels are bored to exactly 71.6 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Porsche Panamera use?
The 2017-2021 Porsche Panamera uses a 5x130 bolt pattern.
How many lug bolts does the Porsche Panamera use?
The Porsche Panamera uses a 5-lug bolt pattern (5x130), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Porsche Panamera?
The Porsche Panamera's center bore is 71.6mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Porsche Panamera?
Factory wheels on the Porsche Panamera are F: 19x9.0J R: 19x10.5J.
What is the biggest wheel size I can fit on my Porsche Panamera without rubbing?
The most aggressive fitment we recommend without fender work is F 19x9.0J ET45 / R 19x10.5J ET45. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Porsche Panamera?
For a flush look with minimal to no rubbing, we recommend F 19x9.0J ET48 / R 19x10.5J ET51 as a starting point on a stock or mildly lowered Porsche Panamera.
Do I need wheel spacers for my Porsche Panamera?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Porsche Panamera?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.89" backspacing up front and 7.76" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Porsche Panamera?
Yes — the Porsche Panamera's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 19x9 wheels · 19 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Bolt pattern and center bore on this page were cross-checked against at least two independent sources before publication. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.