Chevrolet Blazer Bolt Pattern, Center Bore & Wheel Offset (1999–2024)
Chevrolet Blazer wheel fitment: 5x120.65 bolt pattern, 70.3mm center bore (1999–2002); 6x120 bolt pattern, 66.9mm center bore (2019–2023). OE wheel sizes and
- 5x120.65bolt pattern (PCD), most common
- 70.3 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 7 guidesmodel years 1999–2024
Bolt pattern by generation
- 5x120.65, 70.3 mm center bore — 1999–2002 (4 variants)
- 6x120, 66.9 mm center bore — 2019–2023 (2 variants)
- 6x132, 74.5 mm center bore — 2024 (1 variants)
Chevrolet Blazer wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2024 | Chevrolet Blazer EV | 6x132 | 74.5 mm | 21x9.0J |
| 2023 | Chevrolet Blazer | 6x120 | 66.9 mm | 20x8.0J |
| 2019 | Chevrolet Blazer | 6x120 | 66.9 mm | 20x8.0J |
| 2002 | Chevrolet Blazer | 5x120.65 | 70.3 mm | 15x7.0J |
| 2001 | Chevrolet Blazer | 5x120.65 | 70.3 mm | 15x7.0J |
| 2000 | Chevrolet Blazer | 5x120.65 | 70.3 mm | 15x7.0J |
| 1999 | Chevrolet Blazer | 5x120.65 | 70.3 mm | 15x7.0J |
Forged wheels for the Chevrolet Blazer (5x120.65)
Get a quote for Chevrolet Blazer wheels
FAQ
What is the bolt pattern on a Chevrolet Blazer?
The Chevrolet Blazer uses a 5x120.65 bolt pattern on most variants we cover with a 70.3mm center bore. Other generations use 6x120 / 66.9mm (2019–2023), 6x132 / 74.5mm (2024–2024). Always check the exact year and trim before ordering.
What is the Chevrolet Blazer center bore?
The hub-centric center bore is 70.3 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Chevrolet Blazer years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Chevrolet Blazer?
Any wheel drilled 5x120.65 with a 70.3mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.