
2004 Chevrolet Aveo LS 4 Door Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Chevrolet Aveo LS 4 Door wheels? This page gives the 2004 Chevrolet Aveo LS 4 Door bolt pattern (4x100), centre bore, factory rim size and the offset range for aftermarket and forged Chevrolet Aveo LS 4 Door rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Forged wheels for Chevrolet Aveo LS — styles, sizes & factory quote →
Chevrolet Aveo LS 4 Door (2004): 4x100 bolt pattern, 56.6mm center bore. Factory wheels: 14x5.0J F/R. Reference fitment ranges.
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 14x5.0J F/R |
| Flush Fitment | 15x6.5J at ET38 offset |
| Maximum Aggressive | 16x7.0J at ET35 offset |
Forged Wheel Designs for the Chevrolet Aveo LS 4 Door
Every design below is forged to order, so it can be machined to the Chevrolet Aveo LS 4 Door's 4x100 bolt pattern and 56.6 mm center bore, with the width and offset calculated for your setup.


BBS LM-Style Gunmetal Mesh Polished Deep Lip Forged Wheels
Deep Dish · Gunmetal

Rotiform-Style Gloss White 6-Spoke Forged Wheels
Monoblock · Gloss White

BBS-Style Gold Mesh Polished Lip Forged Wheels
Monoblock · Gold

BBS-Style Gold Mesh Polished Lip 2-Piece Forged Wheels
2-Piece · Gold

Bronze Gold Cross-Spoke Forged Wheels
Monoblock · Bronze Gold

OZ Racing-Style Gloss White 15-Spoke Forged Wheels
Monoblock · Gloss White

Rays-Style Gunmetal Mesh Polished Deep Lip Forged Wheels
Deep Dish · Gunmetal
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.


ANKUSI Engineering Expert Advice
Most of the engineering value in a forged wheel over a cast one shows up in rotational mass, not outright strength — both can meet the same load rating, but the forged piece gets there lighter. On a sedan platform tuned for everyday balance, that weight saving is felt directly in steering response and ride quality.
The Chevrolet Aveo LS 4 Door runs a 4x100 bolt pattern, 56.6mm center bore, and a 14x5.0J, front and rear, wheel from the factory. Our Flush Fitment reference is 15x6.5J ET38, which tucks the tire under the fender lip on a stock-height Chevrolet Aveo LS 4 Door. Our Maximum Aggressive reference is 16x7.0J ET35 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Chevrolet Aveo LS 4 Door OE Wheel Specs
The 2004 Chevrolet Aveo LS 4 Door (Sedan) uses a 4x100 bolt pattern with a 56.6mm center bore. Factory wheels are 14x5.0J F/R.
Why the factory spec works for most owners:
- Balances ride comfort with everyday drivability
- A commonly used size for this vehicle class, supporting parts and tire availability
- Maintains clearance for the factory suspension and brake components
- Provides stable, predictable handling across normal driving conditions
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Chevrolet Aveo LS 4 Door (2004) we drill the 4x100 pattern and cut the centre bore to 56.6mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 14x5.0J ET45 → ~4.77″ backspacing
- Flush: 15x6.5J ET38 → ~5.25″ backspacing
- Max: 16x7.0J ET35 → ~5.38″ backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Chevrolet spec, or want a wheel built to a custom offset for your Chevrolet Aveo LS 4 Door? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Frequently Asked Questions
What bolt pattern (PCD) does the Chevrolet Aveo LS 4 Door use?
How many lug bolts does the Chevrolet Aveo LS 4 Door use?
What is the center bore size on the Chevrolet Aveo LS 4 Door?
What size are the factory (stock) wheels on the Chevrolet Aveo LS 4 Door?
What is the biggest wheel size I can fit on my Chevrolet Aveo LS 4 Door without rubbing?
What does a flush wheel fitment look like on the Chevrolet Aveo LS 4 Door?
Do I need wheel spacers for my Chevrolet Aveo LS 4 Door?
How do I calculate wheel backspacing for my Chevrolet Aveo LS 4 Door?
What's the difference between wheel offset and backspacing?
Can I run staggered wheels (different sizes front and rear) on my Chevrolet Aveo LS 4 Door?
Wheel Installation Reference: Torque, Thread & TPMS
Thread & Fastener: M12x1.5, conical-seat lug nut.
Factory Torque Spec: 136 Nm (100 ft-lb). Covers most Chevrolet passenger cars and crossovers on M12 studs.
TPMS: Vehicles built before the 2008 model year were not federally required to carry factory TPMS in the US, though many manufacturers adopted it earlier; verify whether your specific build has TPMS before ordering sensor-compatible wheels.
Tire Pressure: Always set tire pressure to the value on your vehicle's tire placard (driver's doorjamb or glovebox), not the max PSI printed on the tire sidewall — this is trim- and tire-size-specific and stays the same reference point when you switch to a different wheel and tire combination.
Reference data compiled from published OEM service specifications and cross-checked against independent repair sources; always confirm against your owner's manual or door-jamb placard before installation.