Chevrolet Lumina Bolt Pattern, Center Bore & Wheel Offset (1998–2008)
Chevrolet Lumina wheel fitment: 5x120 bolt pattern, 69.6mm center bore (2004–2008); 5x115 bolt pattern, 70.3mm center bore. OE wheel sizes and offsets for eve
- 5x120bolt pattern (PCD), most common
- 66.9 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 3 guidesmodel years 1998–2008
Bolt pattern by generation
- 5x120, 66.9 mm center bore — 2008 (1 variants)
- 5x120, 69.6 mm center bore — 2004 (1 variants)
- 5x115, 70.3 mm center bore — 1998 (1 variants)
Chevrolet Lumina wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2008 | Chevrolet Lumina SS | 5x120 | 66.9 mm | 18x8.0J |
| 2004 | Chevrolet Lumina SS | 5x120 | 69.6 mm | 17x8.0J |
| 1998 | Chevrolet Lumina | 5x115 | 70.3 mm | 15x6.0J |
Factory wheel sizes on the Chevrolet Lumina
Across the 3 Chevrolet Lumina trims with a documented factory wheel, the OE diameter is 15-18 inch, width 6-8J. A forged wheel that keeps the bolt pattern and hub bore of your generation (see the table above) and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Chevrolet Lumina (5x120)
Shop all Chevrolet Lumina forged wheels →
Get a quote for Chevrolet Lumina wheels
Vehicles With the Same Hub as the Chevrolet Lumina (5x120, 66.9 mm Bore)
In our database, 121 other vehicle entries from 9 makes use exactly the same 5x120 bolt pattern and 66.9 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x120 is used by 10.3% of the vehicle entries in our database (670 of 6,503); 24.2% of those also use a 66.9 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 18x8J | ET48 | 6.39 in (162 mm) | — | — |
| Flush | 20x9J | ET35 | 6.38 in (162 mm) | 0 mm | +26 mm |
| Maximum | 21x9.5J | ET30 | 6.43 in (163 mm) | +1 mm | +37 mm |
Hub-Centric Rings for a 66.9 mm Center Bore
A wheel with a center bore larger than 66.9 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 67.1 mm | 67.1 → 66.9 mm |
| 70.1 mm | 70.1 → 66.9 mm |
| 70.5 mm | 70.5 → 66.9 mm |
| 71.6 mm | 71.6 → 66.9 mm |
| 73.1 mm | 73.1 → 66.9 mm |
ANKUSI forged wheels are bored to exactly 66.9 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Chevrolet Lumina?
The Chevrolet Lumina uses a 5x120 bolt pattern on most variants we cover with a 66.9mm center bore. Other generations use 5x120 / 69.6mm (2004–2004), 5x115 / 70.3mm (1998–1998). Always check the exact year and trim before ordering.
What is the Chevrolet Lumina center bore?
The hub-centric center bore is 66.9 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Chevrolet Lumina years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Chevrolet Lumina?
Any wheel drilled 5x120 with a 66.9mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.