Black / Machined Petal Forged Wheels
Monoblock · Black Machined
2016 Chevrolet Camaro Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Chevrolet Camaro wheels? This page gives the 2016 Chevrolet Camaro bolt pattern (5x120), centre bore, factory rim size and the offset range for aftermarket and forged Chevrolet Camaro rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Chevrolet Camaro (2016): 5x120 bolt pattern, 66.9mm center bore. Factory wheels: F: 20x8.5J R: 20x9.5J. Reference fitment ranges.
Bolt Pattern5x120
Wheel Bolt/NutM14x1.5 Nut
Center Bore66.9mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Year2016
CategoryCoupe
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | F: 20x8.5J R: 20x9.5J |
| Flush Fitment | F 20x9.5J ET20 / R 20x10.5J ET35 |
| Maximum Aggressive | F 20x10.0J ET15 / R 20x11.0J ET30 |
Forged Wheel Designs for the Chevrolet Camaro
Every design below is forged to order, so it can be machined to the Chevrolet Camaro's 5x120 bolt pattern and 66.9 mm center bore, with the width and offset calculated for your setup.
Gloss Black Milled 5 Twin-Spoke Forged Wheels
Monoblock · Gloss Black
Chevrolet OEM-Style Gloss Black 5-Spoke Machined Face Forged Wheels
Monoblock · Gloss Black
Weld Racing S71-Style Gloss Black 5-Spoke Deep Lip Forged Drag Racing Wheels
Drag Racing · Gloss Black
Corvette OEM-Style Brushed Copper 5 Y-Spoke 2-Piece Forged Wheels
2-Piece · Brushed Copper
Weld Racing-Style Gloss Black 5-Spoke Red Deep Lip Forged Drag Racing Wheels
Drag Racing · Gloss Black
Weld Racing-Style 10 Y-Spoke Mirror Milled Forged Drag Racing Wheels
Drag Racing · Custom Finish
Gloss Black / Machined Mesh Riveted Forged Wheels
Monoblock · Gloss Black / Machined
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
On a performance-oriented coupe, the wheel is one of the few components where shaving weight has a compounding effect — less rotational mass means less work for the brakes, the drivetrain, and the chassis on every input. A forged wheel gets there without compromising the strength margin the factory engineered in.
The Chevrolet Camaro runs a 5x120 bolt pattern, 66.9mm center bore, and a F: 20x8.5J wheel from the factory. Our Flush Fitment reference is F 20x9.5J ET20 / R 20x10.5J ET35, which tucks the tire under the fender lip on a stock-height Chevrolet Camaro. Our Maximum Aggressive reference is F 20x10.0J ET15 / R 20x11.0J ET30 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Chevrolet Camaro OE Wheel Specs
The 2016 Chevrolet Camaro (Coupe) uses a 5x120 bolt pattern with a 66.9mm center bore. Factory wheels are F: 20x8.5J R: 20x9.5J.
Why the factory spec works for most owners:
- Keeps unsprung weight low to preserve the factory handling balance
- Matches the wider, performance-oriented tire sizing typical of this platform
- Maintains clearance for the factory brake package and suspension geometry
- Balances grip with ride comfort for daily and spirited driving
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Chevrolet Camaro (2016) we drill the 5x120 pattern and cut the centre bore to 66.9mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: F 20x8.5J ET25 → ~5.73″ F backspacing, R 20x9.5J ET39 → ~6.79″ R backspacing
- Flush: F 20x9.5J ET20 → ~6.04″ F backspacing, R 20x10.5J ET35 → ~7.13″ R backspacing
- Max: F 20x10.0J ET15 → ~6.09″ F backspacing, R 20x11.0J ET30 → ~7.18″ R backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Chevrolet spec, or want a wheel built to a custom offset for your Chevrolet Camaro? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Frequently Asked Questions
What bolt pattern (PCD) does the Chevrolet Camaro use?
The 2016 Chevrolet Camaro uses a 5x120 bolt pattern.
How many lug bolts does the Chevrolet Camaro use?
The Chevrolet Camaro uses a 5-lug bolt pattern (5x120), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Chevrolet Camaro?
The Chevrolet Camaro's center bore is 66.9mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Chevrolet Camaro?
Factory wheels on the Chevrolet Camaro are F: 20x8.5J R: 20x9.5J.
What is the biggest wheel size I can fit on my Chevrolet Camaro without rubbing?
The most aggressive fitment we recommend without fender work is F 20x10.0J ET15 / R 20x11.0J ET30. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Chevrolet Camaro?
For a flush look with minimal to no rubbing, we recommend F 20x9.5J ET20 / R 20x10.5J ET35 as a starting point on a stock or mildly lowered Chevrolet Camaro.
Do I need wheel spacers for my Chevrolet Camaro?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Chevrolet Camaro?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.04" backspacing up front and 7.13" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Chevrolet Camaro?
Yes — the Chevrolet Camaro's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.
Wheel Installation Reference: Torque, Thread & TPMS
Thread & Fastener: M12x1.5, conical-seat lug nut.
Factory Torque Spec: 136 Nm (100 ft-lb). Covers most Chevrolet passenger cars and crossovers on M12 studs.
TPMS: TPMS (Tire Pressure Monitoring System) has been federally mandated on all new light vehicles sold in the US since the 2008 model year. If your wheels use OE-style sensors, have them transferred or cloned to the new wheels at installation.
Tire Pressure: Always set tire pressure to the value on your vehicle's tire placard (driver's doorjamb or glovebox), not the max PSI printed on the tire sidewall — this is trim- and tire-size-specific and stays the same reference point when you switch to a different wheel and tire combination.
Reference data compiled from published OEM service specifications and cross-checked against independent repair sources; always confirm against your owner's manual or door-jamb placard before installation.