Weld Racing-Style Mirror Polished 12-Spoke Forged Drag Racing Wheels
Drag Racing · Mirror Polished
2016 Chevrolet Corvette Z06 C7.R Edition Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Chevrolet Corvette Z06 C7.R Edition wheels? This page gives the 2016 Chevrolet Corvette Z06 C7.R Edition bolt pattern (5x120.65), centre bore, factory rim size and the offset range for aftermarket and forged Chevrolet Corvette Z06 C7.R Edition rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2016 Chevrolet Corvette Z06 C7.R Edition uses a 5x120.65 bolt pattern with a 70.3 mm centre bore and M12x1.5 lug nuts. Factory wheels: F: 19x10.0J R: 20x12.0J. For aftermarket wheels, 19x10.5J ET35 front / 20x12.5J ET70 rear sits flush and 20x11.0J ET30 front / 21x13.0J ET65 rear is the most aggressive fit.
Forged wheels for the 2016 Chevrolet Corvette Z06 C7.R Edition — drilled 5x120.65 with a 70.3 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Chevrolet Corvette Z06 C7.R Edition (2016): 5x120.65 bolt pattern, 70.3mm center bore. Factory wheels: F: 19x10.0J R: 20x12.0J. Reference fitment ranges.
Bolt Pattern5x120.65
Wheel Bolt/NutM12x1.5 Nut
Center Bore70.3mm
Wheel Load Rating700–850 kg/wheel (Performance / Sports Car segment reference)
Caliper TypeBrembo 6-piston fixed front / 4-piston fixed rear (OEM)
Year2016
CategorySupercar
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | F: 19x10.0J R: 20x12.0J |
| Flush Fitment | F 19x10.5J ET35 / R 20x12.5J ET70 |
| Maximum Aggressive | F 20x11.0J ET30 / R 21x13.0J ET65 |
Forged Wheel Designs for the Chevrolet Corvette Z06 C7.R Edition
Every design below is forged to order, so it can be machined to the Chevrolet Corvette Z06 C7.R Edition's 5x120.65 bolt pattern and 70.3 mm center bore, with the width and offset calculated for your setup.
Weld Racing-Style Gloss Black 5-Spoke Polished-Lip Beadlock Forged Drag Racing Wheels
Drag Racing · Custom Finish
Corvette OEM-Style Chrome Mesh Forged Wheels
Monoblock · Chrome
Polished 5-Spoke Deep Lip Forged Wheels
Deep Dish · Polished
Weld Racing-Style Gloss Black / Machined 5 Y-Spoke Forged Drag Racing Wheels
Drag Racing · Gloss Black / Machined
Weld Racing-Style Gloss Black Milled Mesh Beadlock Forged Drag Racing Wheels
Drag Racing · Custom Finish
Belak-Style Brushed Silver 10-Spoke Black-Ring Beadlock Forged Drag Racing Wheels
Drag Racing · Custom Finish
Belak-Style Gloss Black Red-Ring 10-Spoke Mesh Beadlock Forged Drag Racing Wheels
Drag Racing · Gloss Black / Red
See all Chevrolet Corvette wheel designs Corvette OEM-Style Forged Wheels
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Every gram of rotational mass on a supercar fights the acceleration, braking, and rotational inertia numbers the factory spent enormous engineering effort achieving. A forged wheel for the Chevrolet Corvette Z06 C7.R Edition holds the OE strength rating at meaningfully less weight, which is a real, measurable performance gain rather than a cosmetic one.
The Chevrolet Corvette Z06 C7.R Edition runs a 5x120.65 bolt pattern, 70.3mm center bore, and a F: 19x10.0J wheel from the factory. Our Flush Fitment reference is F 19x10.5J ET35 / R 20x12.5J ET70, which tucks the tire under the fender lip on a stock-height Chevrolet Corvette Z06 C7.R Edition. Our Maximum Aggressive reference is F 20x11.0J ET30 / R 21x13.0J ET65 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Chevrolet Corvette Z06 C7.R Edition OE Wheel Specs
The 2016 Chevrolet Corvette Z06 C7.R Edition (Supercar) uses a 5x120.65 bolt pattern with a 70.3mm center bore. Factory wheels are F: 19x10.0J R: 20x12.0J.
Why the factory spec works for most owners:
- Balances ride comfort with everyday drivability
- A commonly used size for this vehicle class, supporting parts and tire availability
- Maintains clearance for the factory suspension and brake components
- Provides stable, predictable handling across normal driving conditions
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Chevrolet Corvette Z06 C7.R Edition (2016) we drill the 5x120.65 pattern and cut the centre bore to 70.3mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: F 19x10.0J ET43 → ~7.19″ F backspacing, R 20x12.0J ET79 → ~9.61″ R backspacing
- Flush: F 19x10.5J ET35 → ~7.13″ F backspacing, R 20x12.5J ET70 → ~9.51″ R backspacing
- Max: F 20x11.0J ET30 → ~7.18″ F backspacing, R 21x13.0J ET65 → ~9.56″ R backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Chevrolet spec, or want a wheel built to a custom offset for your Chevrolet Corvette Z06 C7.R Edition? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Vehicles With the Same Hub as the Chevrolet Corvette Z06 C7.R Edition (5x120.65, 70.3 mm Bore)
In our database, 63 other vehicle entries from 6 makes use exactly the same 5x120.65 bolt pattern and 70.3 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x120.65 is used by 1.6% of the vehicle pages in our English fitment guide (101 of 6,503); 63.4% of those also use a 70.3 mm center bore.
Hub-Centric Rings for a 70.3 mm Center Bore
A wheel with a center bore larger than 70.3 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 70.5 mm | 70.5 → 70.3 mm |
| 71.6 mm | 71.6 → 70.3 mm |
| 72.6 mm | 72.6 → 70.3 mm |
| 73.1 mm | 73.1 → 70.3 mm |
ANKUSI forged wheels are bored to exactly 70.3 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Chevrolet Corvette Z06 C7.R Edition use?
The 2016 Chevrolet Corvette Z06 C7.R Edition uses a 5x120.65 bolt pattern.
How many lug bolts does the Chevrolet Corvette Z06 C7.R Edition use?
The Chevrolet Corvette Z06 C7.R Edition uses a 5-lug bolt pattern (5x120.65), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Chevrolet Corvette Z06 C7.R Edition?
The Chevrolet Corvette Z06 C7.R Edition's center bore is 70.3mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Chevrolet Corvette Z06 C7.R Edition?
Factory wheels on the Chevrolet Corvette Z06 C7.R Edition are F: 19x10.0J R: 20x12.0J.
What is the biggest wheel size I can fit on my Chevrolet Corvette Z06 C7.R Edition without rubbing?
The most aggressive fitment we recommend without fender work is F 20x11.0J ET30 / R 21x13.0J ET65. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Chevrolet Corvette Z06 C7.R Edition?
For a flush look with minimal to no rubbing, we recommend F 19x10.5J ET35 / R 20x12.5J ET70 as a starting point on a stock or mildly lowered Chevrolet Corvette Z06 C7.R Edition.
Do I need wheel spacers for my Chevrolet Corvette Z06 C7.R Edition?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Chevrolet Corvette Z06 C7.R Edition?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 7.13" backspacing up front and 9.51" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Chevrolet Corvette Z06 C7.R Edition?
Yes — the Chevrolet Corvette Z06 C7.R Edition's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.
Wheel Installation Reference: Torque, Thread & TPMS
Thread & Fastener: M12x1.5, conical-seat lug nut.
Factory Torque Spec: 136 Nm (100 ft-lb). Covers most Chevrolet passenger cars and crossovers on M12 studs.
TPMS: TPMS (Tire Pressure Monitoring System) has been federally mandated on all new light vehicles sold in the US since the 2008 model year. If your wheels use OE-style sensors, have them transferred or cloned to the new wheels at installation.
Tire Pressure: Always set tire pressure to the value on your vehicle's tire placard (driver's doorjamb or glovebox), not the max PSI printed on the tire sidewall — this is trim- and tire-size-specific and stays the same reference point when you switch to a different wheel and tire combination.
Reference data compiled from published OEM service specifications and cross-checked against independent repair sources; always confirm against your owner's manual or door-jamb placard before installation.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 19x10 wheels · 19 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.