Corvette OEM-Style Gloss Black Web-Mesh Forged Wheels
Monoblock · Gloss Black
2003 Chevrolet Cavalier LS Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Chevrolet Cavalier LS wheels? This page gives the 2003 Chevrolet Cavalier LS bolt pattern (5x100), centre bore, factory rim size and the offset range for aftermarket and forged Chevrolet Cavalier LS rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2003 Chevrolet Cavalier LS uses a 5x100 bolt pattern with a 57.1 mm centre bore and M12x1.5 lug nuts. Factory wheels: 15x6.0J ET42, front and rear. For aftermarket wheels, 17x7.5J ET35 sits flush and 18x8.0J ET32 is the most aggressive fit.
Forged wheels for the 2003 Chevrolet Cavalier LS — drilled 5x100 with a 57.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Chevrolet Cavalier LS (2003): 5x100 bolt pattern, 57.1mm center bore. Factory wheels: 15x6.0J at ET42 offset, front and rear. Reference fitment ranges.
Bolt Pattern5x100
Wheel Bolt/NutM12x1.5 Nut
Center Bore57.1mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Year2003
CategorySedan/Coupe
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 15x6.0J F/R |
| Flush Fitment | 17x7.5J at ET35 offset |
| Maximum Aggressive | 18x8.0J at ET32 offset |
Forged Wheel Designs for the Chevrolet Cavalier LS
Every design below is forged to order, so it can be machined to the Chevrolet Cavalier LS's 5x100 bolt pattern and 57.1 mm center bore, with the width and offset calculated for your setup.
A Forged-Style Gunmetal / Polished Mesh Beadlock Forged Wheels
Off-Road Beadlock · Gunmetal / Polished
Corvette OEM-Style Matte Silver Custom Forged Wheels
Monoblock · Matte Silver
Corvette OEM-Style Red / Black 5 Y-Spoke Forged Wheels
Monoblock · Red / Black
Gloss Black Machined 10-Spoke Forged Wheels
Monoblock · Gloss Black / Machined
Platinum Gloss Black 5 Y-Spoke Cut-Out Forged Wheels
Monoblock · Gloss Black
Corvette OEM-Style Gloss Black Red-Ring Beadlock Off-Road Forged Wheels
Off-Road Beadlock · Gloss Black / Red
Weld Racing-Style Gloss Black / Silver Wide Lip Forged Drag Racing Wheels
Drag Racing · Gloss Black / Silver
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
On a performance-oriented coupe, the wheel is one of the few components where shaving weight has a compounding effect — less rotational mass means less work for the brakes, the drivetrain, and the chassis on every input. A forged wheel gets there without compromising the strength margin the factory engineered in.
The Chevrolet Cavalier LS runs a 5x100 bolt pattern, 57.1mm center bore, and a 15x6.0J, front and rear, wheel from the factory. Our Flush Fitment reference is 17x7.5J ET35, which tucks the tire under the fender lip on a stock-height Chevrolet Cavalier LS. Our Maximum Aggressive reference is 18x8.0J ET32 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Chevrolet Cavalier LS OE Wheel Specs
The 2003 Chevrolet Cavalier LS (Sedan/Coupe) uses a 5x100 bolt pattern with a 57.1mm center bore. Factory wheels are 15x6.0J F/R.
Why the factory spec works for most owners:
- Keeps unsprung weight low to preserve the factory handling balance
- Matches the wider, performance-oriented tire sizing typical of this platform
- Maintains clearance for the factory brake package and suspension geometry
- Balances grip with ride comfort for daily and spirited driving
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Chevrolet Cavalier LS (2003) we drill the 5x100 pattern and cut the centre bore to 57.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Chevrolet spec, or want a wheel built to a custom offset for your Chevrolet Cavalier LS? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 15x6J | ET42 | 5.15 in (131 mm) | — | — |
| Flush | 17x7.5J | ET35 | 5.63 in (143 mm) | +12 mm | +26 mm |
| Maximum | 18x8J | ET32 | 5.76 in (146 mm) | +15 mm | +35 mm |
Vehicles With the Same Hub as the Chevrolet Cavalier LS (5x100, 57.1 mm Bore)
In our database, 85 other vehicle entries from 11 makes use exactly the same 5x100 bolt pattern and 57.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x100 is used by 1.9% of the vehicle pages in our English fitment guide (124 of 6,503); 69.4% of those also use a 57.1 mm center bore.
Hub-Centric Rings for a 57.1 mm Center Bore
A wheel with a center bore larger than 57.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 60.1 mm | 60.1 → 57.1 mm |
| 63.4 mm | 63.4 → 57.1 mm |
| 64.1 mm | 64.1 → 57.1 mm |
| 65.1 mm | 65.1 → 57.1 mm |
| 73.1 mm | 73.1 → 57.1 mm |
ANKUSI forged wheels are bored to exactly 57.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Chevrolet Cavalier LS use?
The 2003 Chevrolet Cavalier LS uses a 5x100 bolt pattern.
How many lug bolts does the Chevrolet Cavalier LS use?
The Chevrolet Cavalier LS uses a 5-lug bolt pattern (5x100), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Chevrolet Cavalier LS?
The Chevrolet Cavalier LS's center bore is 57.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Chevrolet Cavalier LS?
Factory wheels on the Chevrolet Cavalier LS are 15x6.0J F/R.
What is the biggest wheel size I can fit on my Chevrolet Cavalier LS without rubbing?
The most aggressive fitment we recommend without fender work is 18x8.0J at ET32 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Chevrolet Cavalier LS?
For a flush look with minimal to no rubbing, we recommend 17x7.5J at ET35 offset as a starting point on a stock or mildly lowered Chevrolet Cavalier LS.
Do I need wheel spacers for my Chevrolet Cavalier LS?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Chevrolet Cavalier LS?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 5.63" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Chevrolet Cavalier LS?
The Chevrolet Cavalier LS runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Wheel Installation Reference: Torque, Thread & TPMS
Thread & Fastener: M12x1.5, conical-seat lug nut.
Factory Torque Spec: 136 Nm (100 ft-lb). Covers most Chevrolet passenger cars and crossovers on M12 studs.
TPMS: Vehicles built before the 2008 model year were not federally required to carry factory TPMS in the US, though many manufacturers adopted it earlier; verify whether your specific build has TPMS before ordering sensor-compatible wheels.
Tire Pressure: Always set tire pressure to the value on your vehicle's tire placard (driver's doorjamb or glovebox), not the max PSI printed on the tire sidewall — this is trim- and tire-size-specific and stays the same reference point when you switch to a different wheel and tire combination.
Reference data compiled from published OEM service specifications and cross-checked against independent repair sources; always confirm against your owner's manual or door-jamb placard before installation.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 15x6 wheels · 15 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.