Limited-Style Mirror Polished Mesh 3-Piece Beadlock Off-Road Forged Wheels
Off-Road Beadlock · Mirror Polished
2024 Chevrolet Silverado EV Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Chevrolet Silverado EV wheels? This page gives the 2024 Chevrolet Silverado EV bolt pattern (8x165.1), centre bore, factory rim size and the offset range for aftermarket and forged Chevrolet Silverado EV rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2024 Chevrolet Silverado EV uses a 8x165.1 bolt pattern with a 116.7 mm centre bore and M14x1.5 lug nuts. Factory wheels: 24x9.0J ET24, front and rear. For aftermarket wheels, 24x10.0J ET15 sits flush and 26x10.5J ET10 is the most aggressive fit.
Forged wheels for the 2024 Chevrolet Silverado EV — drilled 8x165.1 with a 116.7 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Chevrolet Silverado EV (2024): 8x165.1 bolt pattern, 116.7mm center bore. Factory wheels: 24x9.0J at ET24 offset, front and rear. Reference fitment ranges.
Bolt Pattern8x165.1
Wheel Bolt/NutM14x1.5 Nut
Center Bore116.7mm
Wheel Load Rating1150–1610 kg/wheel (Pickup / Light Truck segment reference)
Year2024
CategoryEV Truck
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 24x9.0J F/R |
| Flush Fitment | 24x10.0J at ET15 offset |
| Maximum Aggressive | 26x10.5J at ET10 offset |
Forged Wheel Designs for the Chevrolet Silverado EV
Every design below is forged to order, so it can be machined to the Chevrolet Silverado EV's 8x165.1 bolt pattern and 116.7 mm center bore, with the width and offset calculated for your setup.
WK Wheels Transparent Red Beadlock Off-Road Forged Wheels
Off-Road Beadlock · Transparent Red
Method Bronze / Gloss Black Custom Beadlock Forged Wheels
Off-Road Beadlock · Bronze / Gloss Black
Weld Racing-Style 5-Spoke Beadlock Black / Polished Off-Road Truck Racing Forged Wheels
Truck Racing · Black / Polished
King-Style Matte Black 20-Spoke Bolt Ring Off-Road Forged Wheels
Off-Road · Matte Black
Mirror Polished Mesh Gold-Ring Beadlock Forged Wheels
Off-Road Beadlock · Mirror Milled / Gold
Black Sand Bolted Ring Cross-Bar Forged Wheels
Off-Road Beadlock · Black Sand
JTX Forged-Style Mirror Polished Fine Multi-Spoke Deep Lip Off-Road Forged Wheels
Off-Road · Mirror Polished
See all Chevrolet Silverado wheel designs Black Mud-Style Forged Wheels
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
On a truck platform, wheel weight sits right at the unsprung mass budget the suspension engineers already spent on payload and towing capacity. A forged wheel keeps that budget intact — same strength, less rotational inertia — instead of eating into the margin the way a cheap cast aftermarket wheel can.
The Chevrolet Silverado EV runs a 8x165.1 bolt pattern, 116.7mm center bore, and a 24x9.0J, front and rear, wheel from the factory. Our Flush Fitment reference is 24x10.0J ET15, which tucks the tire under the fender lip on a stock-height Chevrolet Silverado EV. Our Maximum Aggressive reference is 26x10.5J ET10 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Chevrolet Silverado EV OE Wheel Specs
The 2024 Chevrolet Silverado EV (EV Truck) uses a 8x165.1 bolt pattern with a 116.7mm center bore. Factory wheels are 24x9.0J F/R.
Why the factory spec works for most owners:
- Supports higher payload and towing capacity
- Preserves ground clearance for towing, hauling and light off-road use
- Matches tire sizing commonly available for this class of vehicle
- Maintains clearance for the factory suspension and brake package
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Chevrolet Silverado EV (2024) we drill the 8x165.1 pattern and cut the centre bore to 116.7mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Chevrolet spec, or want a wheel built to a custom offset for your Chevrolet Silverado EV? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 24x9J | ET24 | 5.94 in (151 mm) | — | — |
| Flush | 24x10J | ET15 | 6.09 in (155 mm) | +4 mm | +22 mm |
| Maximum | 26x10.5J | ET10 | 6.14 in (156 mm) | +5 mm | +33 mm |
Vehicles With the Same Hub as the Chevrolet Silverado EV (8x165.1, 116.7 mm Bore)
In our database, 18 other vehicle entries from 4 makes use exactly the same 8x165.1 bolt pattern and 116.7 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
8x165.1 is used by 0.4% of the vehicle pages in our English fitment guide (29 of 6,503); 65.5% of those also use a 116.7 mm center bore.
Hub-Centric Rings for a 116.7 mm Center Bore
A wheel with a center bore larger than 116.7 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 130.1 mm | 130.1 → 116.7 mm |
ANKUSI forged wheels are bored to exactly 116.7 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Chevrolet Silverado EV use?
The 2024 Chevrolet Silverado EV uses a 8x165.1 bolt pattern.
How many lug bolts does the Chevrolet Silverado EV use?
The Chevrolet Silverado EV uses a 8-lug bolt pattern (8x165.1), so you need a 8-lug forged wheel to bolt straight on.
What is the center bore size on the Chevrolet Silverado EV?
The Chevrolet Silverado EV's center bore is 116.7mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Chevrolet Silverado EV?
Factory wheels on the Chevrolet Silverado EV are 24x9.0J F/R.
What is the biggest wheel size I can fit on my Chevrolet Silverado EV without rubbing?
The most aggressive fitment we recommend without fender work is 26x10.5J at ET10 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Chevrolet Silverado EV?
For a flush look with minimal to no rubbing, we recommend 24x10.0J at ET15 offset as a starting point on a stock or mildly lowered Chevrolet Silverado EV.
Do I need wheel spacers for my Chevrolet Silverado EV?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Chevrolet Silverado EV?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.09" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Chevrolet Silverado EV?
The Chevrolet Silverado EV runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Wheel Installation Reference: Torque, Thread & TPMS
Thread & Fastener: M14x1.5, conical-seat lug nut.
Factory Torque Spec: 190 Nm (140 ft-lb). Silverado/Sierra HD single-rear-wheel spec on M14x1.5 studs; dual-rear-wheel (dually) trucks may specify up to 165 ft-lb, confirm before installation.
TPMS: TPMS (Tire Pressure Monitoring System) has been federally mandated on all new light vehicles sold in the US since the 2008 model year. If your wheels use OE-style sensors, have them transferred or cloned to the new wheels at installation.
Tire Pressure: Always set tire pressure to the value on your vehicle's tire placard (driver's doorjamb or glovebox), not the max PSI printed on the tire sidewall — this is trim- and tire-size-specific and stays the same reference point when you switch to a different wheel and tire combination.
Reference data compiled from published OEM service specifications and cross-checked against independent repair sources; always confirm against your owner's manual or door-jamb placard before installation.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.