Porsche Cayenne Bolt Pattern, Center Bore & Wheel Offset (2003–2027)
Porsche Cayenne wheel fitment: 5x130 bolt pattern, 71.6mm center bore (2003–2027).
- 5x130bolt pattern (PCD)
- 71.6 mmcenter bore
- M14x1.5 Boltwheel bolt / nut
- 49 guidesmodel years 2003–2027
Porsche Cayenne wheel specs by year and trim
Factory wheel sizes on the Porsche Cayenne
Across the 49 Porsche Cayenne trims with a documented factory wheel, the OE diameter is 17-22 inch, width 7.5-10.5J and offset ET53-60. A forged wheel that keeps the 5x130 bolt pattern and the 71.6 mm hub bore and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Porsche Cayenne (5x130)
Shop all Porsche Cayenne forged wheels →
Get a quote for Porsche Cayenne wheels
Vehicles With the Same Hub as the Porsche Cayenne (5x130, 71.6 mm Bore)
In our database, 84 other vehicle entries from 9 makes use exactly the same 5x130 bolt pattern and 71.6 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x130 is used by 5.8% of the vehicle pages in our English fitment guide (375 of 6,503); 78.7% of those also use a 71.6 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 21x10J | ET50 | 7.47 in (190 mm) | — | — |
| Flush | 21x10J | ET40 | 7.07 in (180 mm) | −10 mm | +10 mm |
| Maximum | 21x10.5J | ET25 | 6.73 in (171 mm) | −19 mm | +31 mm |
Hub-Centric Rings for a 71.6 mm Center Bore
A wheel with a center bore larger than 71.6 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 72.6 mm | 72.6 → 71.6 mm |
| 73.1 mm | 73.1 → 71.6 mm |
| 74.1 mm | 74.1 → 71.6 mm |
| 76.1 mm | 76.1 → 71.6 mm |
ANKUSI forged wheels are bored to exactly 71.6 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Porsche Cayenne?
The Porsche Cayenne uses a 5x130 bolt pattern with a 71.6mm center bore across every Cayenne variant in our database (49 guides, 2003–2027).
What is the Porsche Cayenne center bore?
The hub-centric center bore is 71.6 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Porsche Cayenne years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Porsche Cayenne?
Any wheel drilled 5x130 with a 71.6mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.