Porsche 718 Bolt Pattern, Center Bore & Wheel Offset (2016–2024)
Porsche 718 wheel fitment: 5x130 bolt pattern, 71.6mm center bore (2016–2020). OE wheel sizes and offsets for every 718 variant we cover (4 guides), plus flus
- 5x130bolt pattern (PCD)
- 71.6 mmcenter bore
- Centre-lock single nut (600 Nm, 3/4in drive)wheel bolt / nut
- 4 guidesmodel years 2016–2024
Porsche 718 wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2024 | Porsche 718 Spyder RS | — | 71.6 mm | — |
| 2024 | Porsche 718 Spyder RS Gentian Blue Metallic | — | 71.6 mm | — |
| 2024 | Porsche 718 Spyder RS Racing Yellow | — | 71.6 mm | — |
| 2020 | Porsche 718 Spyder | 5x130 | 71.6 mm | 20x8.5J |
Factory wheel sizes on the Porsche 718
Across the 1 Porsche 718 trim with a documented factory wheel, the OE diameter is 20 inch, width 8.5J. A forged wheel that keeps the 5x130 bolt pattern and the 71.6 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Porsche 718 (5x130)
Shop all Porsche 718 forged wheels →
Get a quote for Porsche 718 wheels
Vehicles With the Same Hub as the Porsche 718 (5x130, 71.6 mm Bore)
In our database, 84 other vehicle entries from 9 makes use exactly the same 5x130 bolt pattern and 71.6 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x130 is used by 5.8% of the vehicle entries in our database (375 of 6,503); 78.7% of those also use a 71.6 mm center bore.
Hub-Centric Rings for a 71.6 mm Center Bore
A wheel with a center bore larger than 71.6 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 72.6 mm | 72.6 → 71.6 mm |
| 73.1 mm | 73.1 → 71.6 mm |
| 74.1 mm | 74.1 → 71.6 mm |
| 76.1 mm | 76.1 → 71.6 mm |
ANKUSI forged wheels are bored to exactly 71.6 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Porsche 718?
The Porsche 718 uses a 5x130 bolt pattern with a 71.6mm center bore across every 718 variant in our database (4 guides, 2016–2024).
What is the Porsche 718 center bore?
The hub-centric center bore is 71.6 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Porsche 718 years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Porsche 718?
Any wheel drilled 5x130 with a 71.6mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.