Rays-Style Bronze Deep Lip Forged Wheels
Deep Dish · Bronze
2024 Jeep Wagoneer S Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Jeep Wagoneer S wheels? This page gives the 2024 Jeep Wagoneer S bolt pattern (5x127), centre bore, factory rim size and the offset range for aftermarket and forged Jeep Wagoneer S rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Forged wheels for Jeep Wagoneer — styles, sizes & factory quote →
Jeep Wagoneer S (2024): 5x127 bolt pattern, 71.5mm center bore, OE 20x8.5J ET40. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x127
Wheel Bolt/Nut1/2\"x20 Nut
Center Bore71.5mm
Wheel Load Rating900–1250 kg/wheel (SUV segment reference)
Year2024
Category5-Lug Large Sedan/SUV
Data check: the bolt pattern and center bore on this page have not yet been confirmed by a second independent source. Measure your hub or ask us before ordering. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 20x8.5J ET40 |
| Flush Fitment | 21x9.5J at ET25 offset |
Forged Wheel Designs for the Jeep Wagoneer S
Every design below is forged to order, so it can be machined to the Jeep Wagoneer S's 5x127 bolt pattern and 71.5 mm center bore, with the width and offset calculated for your setup.
Black Rhino-Style Rhino Matte Black Semi-Full-Face Exposed Bolt Detail Forged Wheels
Replica · Matte Black
Black Rhino-Style Rhino Matte Black Exposed Bolt Detail Forged Wheels
Replica · Matte Black
Polished H-Type Spoke Directional Milled Forged Wheels
H-Type · Polished
Gunmetal Round-Hole Deep Lip Forged Wheels
Deep Dish · Gunmetal
Plumb Matte Black Full-Face Forged Wheels
Replica · Matte Black
Brox Metallic Gray Exposed Bolt Detail Forged Wheels
Replica · Metallic Gray
Matte Black Deep Lip Forged Wheels
Deep Dish · Matte Black
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
SUVs carry more curb weight higher off the ground, so wheel strength and rotational mass both matter more than on a comparable sedan — a heavier wheel amplifies body roll and slows steering response exactly where the platform is already working hardest. Forging keeps the wheel light without giving up the load rating the factory suspension geometry was tuned around.
The Jeep Wagoneer S ships from the factory on a 5x127 bolt pattern with a 71.5mm center bore and a 20x8.5J ET40 wheel. Our flush reference for the Jeep Wagoneer S is 21x9.5J ET25.; our maximum aggressive reference is 22x10J ET20. — beyond that, expect clearance issues against the fender liner without further modification.
Jeep Wagoneer S OE Wheel Specs
The Jeep Wagoneer S ships from the factory on 5x127 bolt pattern wheels with a 71.5mm center bore. The stock wheel size is 20x8.5J ET40, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Jeep Wagoneer S (2024) we drill the 5x127 pattern and cut the centre bore to 71.5mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as: wheel width (in) / 2 + offset (mm) / 25.4 + 0.5.
- OE 20x8.5J ET40: backspacing ≈ 6.32"
- Flush 21x9.5J ET25: backspacing ≈ 6.23"
- Max 22x10J ET20: backspacing ≈ 6.29"
Use our offset & backspacing calculator to fine-tune your fitment, or contact ANKUSI for a custom forged wheel quote for your Jeep Wagoneer S.
Frequently Asked Questions
What bolt pattern (PCD) does the Jeep Wagoneer S use?
The 2024 Jeep Wagoneer S uses a 5x127 bolt pattern.
How many lug bolts does the Jeep Wagoneer S use?
The Jeep Wagoneer S uses a 5-lug bolt pattern (5x127), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Jeep Wagoneer S?
The Jeep Wagoneer S's center bore is 71.5mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Jeep Wagoneer S?
Factory wheels on the Jeep Wagoneer S are 20x8.5J ET40.
What does a flush wheel fitment look like on the Jeep Wagoneer S?
For a flush look with minimal to no rubbing, we recommend 21x9.5J at ET25 offset as a starting point on a stock or mildly lowered Jeep Wagoneer S.
Do I need wheel spacers for my Jeep Wagoneer S?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Jeep Wagoneer S?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.23" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Jeep Wagoneer S?
The Jeep Wagoneer S runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.