Audi RS6 Bolt Pattern, Center Bore & Wheel Offset (2002–2024)
Audi RS6 wheel fitment: 5x112 bolt pattern, 66.5mm center bore (2020–2024); 5x112 bolt pattern, 57.1mm center bore (2002–2009). OE wheel sizes and offsets for
- 5x112bolt pattern (PCD), most common
- 66.5 mmcenter bore
- M14x1.5 Boltwheel bolt / nut
- 9 guidesmodel years 2002–2024
Bolt pattern by generation
- 5x112, 66.5 mm center bore — 2020–2024 (6 variants)
- 5x112, 57.1 mm center bore — 2002–2009 (3 variants)
Audi RS6 wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2024 | Audi RS6 Avant GT | 5x112 | 66.5 mm | 22x10.5J ET19 |
| 2024 | Audi RS6 Avant GT [UK] | 5x112 | 66.5 mm | 22x10.5J ET19 |
| 2023 | Audi RS6 Avant performance | 5x112 | 66.5 mm | 22x10.5J ET19 |
| 2023 | Audi RS6 Avant performance [UK] | 5x112 | 66.5 mm | 22x10.5J ET19 |
| 2021 | Audi RS6 Avant RS Tribute Edition | 5x112 | 66.5 mm | 22x10.5J ET19 |
| 2020 | Audi RS6 Avant (All) | 5x112 | 66.5 mm | 22x10.5J ET19 |
| 2009 | Audi RS6 | 5x112 | 57.1 mm | 20x9.5J ET30 |
| 2004 | Audi RS6 plus | 5x112 | 57.1 mm | 19x9.0J ET30 |
| 2002 | Audi RS6 Sedan | 5x112 | 57.1 mm | 19x9.0J ET30 |
Factory wheel sizes on the Audi RS6
Across the 9 Audi RS6 trims with a documented factory wheel, the OE diameter is 19-22 inch, width 9-10.5J and offset ET19-30. A forged wheel that keeps the bolt pattern and hub bore of your generation (see the table above) and stays inside that offset range bolts on without spacers or hub rings. The offset spread between trims is 11 mm, so read the year-by-year row for your exact car before choosing a width. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Audi RS6 (5x112)
Shop all Audi RS6 forged wheels →
Get a quote for Audi RS6 wheels
Vehicles With the Same Hub as the Audi RS6 (5x112, 66.5 mm Bore)
In our database, 23 other vehicle entries from 5 makes use exactly the same 5x112 bolt pattern and 66.5 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x112 is used by 21.6% of the vehicle entries in our database (1,407 of 6,503); 11.9% of those also use a 66.5 mm center bore.
Hub-Centric Rings for a 66.5 mm Center Bore
A wheel with a center bore larger than 66.5 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.6 mm | 66.6 → 66.5 mm |
| 67.1 mm | 67.1 → 66.5 mm |
| 70.1 mm | 70.1 → 66.5 mm |
| 70.5 mm | 70.5 → 66.5 mm |
| 73.1 mm | 73.1 → 66.5 mm |
ANKUSI forged wheels are bored to exactly 66.5 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Audi RS6?
The Audi RS6 uses a 5x112 bolt pattern on most variants we cover with a 66.5mm center bore. Other generations use 5x112 / 57.1mm (2002–2009). Always check the exact year and trim before ordering.
What is the Audi RS6 center bore?
The hub-centric center bore is 66.5 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Audi RS6 years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Audi RS6?
Any wheel drilled 5x112 with a 66.5mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.