Audi Q6 Bolt Pattern, Center Bore & Wheel Offset (2025)
Audi Q6 wheel fitment: 5x130 bolt pattern, 66.5mm center bore. OE wheel sizes and offsets for every Q6 variant we cover (3 guides), plus flush and maximum aft
- 5x130bolt pattern (PCD)
- 66.5 mmcenter bore
- M14x1.5 Boltwheel bolt / nut
- 3 guidesmodel years 2025
Audi Q6 wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2025 | Audi Q6 Sportback e-tron [UK] | 5x130 | 66.5 mm | — |
| 2025 | Audi Q6 e-tron [US] | 5x130 | 66.5 mm | — |
| 2025 | Audi Q6 e-tron quattro | 5x130 | 66.5 mm | — |
Forged wheels for the Audi Q6 (5x130)
Shop all Audi Q6 forged wheels →
Get a quote for Audi Q6 wheels
Vehicles With the Same Hub as the Audi Q6 (5x130, 66.5 mm Bore)
In our database, 6 other Porsche entries use exactly the same 5x130 bolt pattern and 66.5 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x130 is used by 5.8% of the vehicle entries in our database (372 of 6,396); 3.2% of those also use a 66.5 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 19x8.5J | ET35 | 6.13 in (156 mm) | — | — |
| Flush | 20x9.5J | ET25 | 6.23 in (158 mm) | +3 mm | +23 mm |
| Maximum | 21x1J | ET20 | 6.29 in (160 mm) | +4 mm | +34 mm |
Hub-Centric Rings for a 66.5 mm Center Bore
A wheel with a center bore larger than 66.5 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.6 mm | 66.6 → 66.5 mm |
| 67.1 mm | 67.1 → 66.5 mm |
| 70.1 mm | 70.1 → 66.5 mm |
| 70.5 mm | 70.5 → 66.5 mm |
| 73.1 mm | 73.1 → 66.5 mm |
ANKUSI forged wheels are bored to exactly 66.5 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Audi Q6?
The Audi Q6 uses a 5x130 bolt pattern with a 66.5mm center bore across every Q6 variant in our database (3 guides, 2025).
What is the Audi Q6 center bore?
The hub-centric center bore is 66.5 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Audi Q6 years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Audi Q6?
Any wheel drilled 5x130 with a 66.5mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.