5x120.65 Bolt Pattern Wheels: Fitment Guide

The 5x120.65 bolt pattern (5x4.75 in inches) is used by 119 vehicles in our database: Chevrolet Corvette, Chevrolet Camaro, Lamborghini Murcielago and more.

What 5x120.65 Means & What Uses It

5x120.65 means 5 wheel studs or bolts evenly spaced on a 120.65 mm (4.75") circle, written 5x4.75 in inches. In the ANKUSI fitment database it appears on 119 vehicle variants from 7 makes, model years 1953–2019.

Most common makes: Chevrolet (58), Aston Martin (20), Lamborghini (20), Buick (7), Cadillac (6), Jaguar (6), Oldsmobile (2).

Popular models on 5x120.65: Chevrolet Corvette, Chevrolet Camaro, Lamborghini Murcielago, Buick Riviera, Lamborghini Diablo, Aston Martin V8 Vantage, Chevrolet Blazer, Chevrolet Corvette Grand.

Center bore is not the same across 5x120.65 vehicles: 70.3 mm (71 vehicles), 73.8 mm (20 vehicles). A wheel with the right bolt pattern but the wrong center bore will not seat on the hub — it needs to be machined to the exact bore or used with a hub-centric ring. Check the model page for your exact year before ordering.

Typical fastener: M12x1.5 Nut.

ANKUSI currently lists 146 forged wheel designs drilled 5x120.65, and every design can be machined to 5x120.65 with your vehicle's exact center bore and offset, in 14–24 inch diameters.

5x120.65 Forged Wheels

Forged to order in our Guangzhou factory with the 5x120.65 bolt pattern, your exact center bore, width and offset. From 0 per wheel.

Browse all forged wheel designs →

5x120.65 Vehicles We Cover (121)

Chevrolet

58

Aston Martin

20

Lamborghini

20

Buick

7

Cadillac

6

Jaguar

6

Oldsmobile

2

Pontiac

2

Bolt pattern alone does not guarantee a correct fit — center bore, offset, and load rating still need to be confirmed per vehicle. Check our Fitment Verification Checklist before ordering, or send us your VIN or trim level and we will confirm it for you.

Vehicles Using 5x120.65 With a 70.3 mm Center Bore

In our database, 64 other vehicle entries from 6 makes use exactly the same 5x120.65 bolt pattern and 70.3 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.

5x120.65 is used by 1.6% of the vehicle pages in our English fitment guide (101 of 6,503); 63.4% of those also use a 70.3 mm center bore.

Hub-Centric Rings for a 70.3 mm Center Bore

A wheel with a center bore larger than 70.3 mm needs a hub-centric ring. The most common combinations:

Wheel boreRing size
70.5 mm70.5 → 70.3 mm
71.6 mm71.6 → 70.3 mm
72.6 mm72.6 → 70.3 mm
73.1 mm73.1 → 70.3 mm

ANKUSI forged wheels are bored to exactly 70.3 mm for this vehicle, so no ring is needed.

Sources and Last Update

Bolt pattern and center bore were checked against at least two independent fitment references before publication.

This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).

Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.

← Back to the Bolt Pattern & Wheel Size Guide · Browse by vehicle · Browse forged wheels

Contact WhatsApp Get a Quote