Jaguar OEM-Style Custom Finish Directional Machined Face Forged Wheels
Monoblock · Custom Finish
1996 Jaguar XJS Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Jaguar XJS wheels? This page gives the 1996 Jaguar XJS bolt pattern (5x120.65), centre bore, factory rim size and the offset range for aftermarket and forged Jaguar XJS rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 1996 Jaguar XJS uses a 5x120.65 bolt pattern with a 73.8 mm centre bore and M12x1.5 lug nuts. Factory wheels: 16x7J ET28. For aftermarket wheels, 17x8J ET20 sits flush.
Forged wheels for the 1996 Jaguar XJS — drilled 5x120.65 with a 73.8 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Jaguar XJS (1996): 5x120.65 bolt pattern, 73.8mm center bore, OE 16x7J ET28. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x120.65
Wheel Bolt/NutM12x1.5 Nut
Center Bore73.8mm
Wheel Load Rating700–850 kg/wheel (Performance / Sports Car segment reference)
Year1996
Category5-Lug Performance / Tuner
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 16x7J ET28 |
| Flush Fitment | 17x8J at ET20 offset |
Forged Wheel Designs for the Jaguar XJS
Every design below is forged to order, so it can be machined to the Jaguar XJS's 5x120.65 bolt pattern and 73.8 mm center bore, with the width and offset calculated for your setup.
Jaguar OEM-Style Gloss Black 10 Y-Spoke Forged Wheels
Monoblock · Gloss Black
BBS-Style Bright Silver Y-Spoke Mesh Forged Wheels
Monoblock · Bright Silver
Corvette OEM-Style Mirror Polished 5 Y-Spoke Deep Lip 2-Piece Forged Wheels
2-Piece · Mirror Polished
Jaguar OEM-Style Gunmetal 5-Spoke Forged Wheels
Monoblock · Gunmetal
Jaguar OEM-Style Silver Slotted Dish Forged Wheels
Monoblock · Silver
Jaguar OEM-Style Silver / Gloss Black Machined Face Forged Wheels
Monoblock · Silver / Gloss Black
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
A sedan's wheel spec is a balance point the factory tuned between ride comfort, steering feel, and everyday durability. Forging lets us hold that same structural margin while cutting rotational mass, which is where most of the real-world benefit — quicker steering response, marginally better ride — actually comes from.
The Jaguar XJS ships from the factory on a 5x120.65 bolt pattern with a 73.8mm center bore and a 16x7J ET28 wheel. Our flush reference for the Jaguar XJS is 17x8J ET20.; our maximum aggressive reference is 18x8.5J ET15. — beyond that, expect clearance issues against the fender liner without further modification.
Jaguar XJS OE Wheel Specs
The Jaguar XJS ships from the factory on 5x120.65 bolt pattern wheels with a 73.8mm center bore. The stock wheel size is 16x7J ET28, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Jaguar XJS (1996) we drill the 5x120.65 pattern and cut the centre bore to 73.8mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 16x7J | ET28 | 5.10 in (130 mm) | — | — |
| Flush | 17x8J | ET20 | 5.29 in (134 mm) | +5 mm | +21 mm |
| Maximum | 18x8.5J | ET15 | 5.34 in (136 mm) | +6 mm | +32 mm |
Vehicles With the Same Hub as the Jaguar XJS (5x120.65, 73.8 mm Bore)
In our database, 25 other vehicle entries from 2 makes use exactly the same 5x120.65 bolt pattern and 73.8 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x120.65 is used by 1.6% of the vehicle pages in our English fitment guide (101 of 6,503); 25.7% of those also use a 73.8 mm center bore.
Hub-Centric Rings for a 73.8 mm Center Bore
A wheel with a center bore larger than 73.8 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 74.1 mm | 74.1 → 73.8 mm |
| 76.1 mm | 76.1 → 73.8 mm |
| 78.1 mm | 78.1 → 73.8 mm |
| 84.1 mm | 84.1 → 73.8 mm |
ANKUSI forged wheels are bored to exactly 73.8 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Jaguar XJS use?
The 1996 Jaguar XJS uses a 5x120.65 bolt pattern.
How many lug bolts does the Jaguar XJS use?
The Jaguar XJS uses a 5-lug bolt pattern (5x120.65), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Jaguar XJS?
The Jaguar XJS's center bore is 73.8mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Jaguar XJS?
Factory wheels on the Jaguar XJS are 16x7J ET28.
What does a flush wheel fitment look like on the Jaguar XJS?
For a flush look with minimal to no rubbing, we recommend 17x8J at ET20 offset as a starting point on a stock or mildly lowered Jaguar XJS.
Do I need wheel spacers for my Jaguar XJS?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Jaguar XJS?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 5.29" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Jaguar XJS?
The Jaguar XJS runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 16x7 wheels · 16 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.