
Forgiato-Style Mirror Polished Multi-Spoke Mesh 2-Piece Forged Wheels
Porsche 911 / Continental GT Fitment · 5-Lug
123 fitment guides for Bentley, covering 1991 to 2027, spanning 5x112, 5x120, 5x130 and 5x154.94 bolt patterns. Browse the full list below, then open a model for bolt pattern, center bore, OE offset, flush and max wheel sizes, and offset/backspacing conversions.
Based on the 123 Bentley fitment guides we cover, we have documented 5 distinct bolt pattern / center bore combinations across different Bentley platforms and model years:
Do not mix platforms: a wheel forged for one Bentley bolt pattern / center bore combination will not hub-center correctly on a different one, even if the diameter looks right. Always confirm your exact model and year against the bolt pattern and center bore listed on that model page below before ordering — or send us your VIN or trim level and we will confirm it for you.
Offset and backspacing recommendations vary by trim even within the same bolt pattern, mainly due to differences in brake caliper size and suspension geometry between base and performance trims. Every ANKUSI wheel is forged to your exact target offset, so send us your Bentley model, year, and trim and we will confirm the correct spec before production — no guessing required.
The most common Bentley fitment in our guide is 5x130 with a 71.6 mm center bore (51 of 123 model years we cover).
Changing width or offset? Check how far the wheel moves in or out with our offset & backspacing calculator.
Forged-to-order wheel designs matched to Bentley bolt patterns. Every set is machined to your exact model, offset and center bore.

Porsche 911 / Continental GT Fitment · 5-Lug

Porsche 911 / Continental GT Fitment · 5-Lug

Bentley Continental GT / Bentayga Fitment

Bentley Continental GT / Rolls-Royce Ghost Fitment · 5-Lug

Bentley Continental GT / Rolls-Royce Ghost Fitment · 5-Lug

Bentley Continental GT / Flying Spur Fitment · 5-Lug

Porsche 911 / Continental GT Fitment · 5-Lug

Bentley Continental / Flying Spur Fitment
In our database, 254 other vehicle entries from 9 makes use exactly the same 5x130 bolt pattern and 71.6 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x130 is used by 5.8% of the vehicle pages in our English fitment guide (375 of 6,503); 78.7% of those also use a 71.6 mm center bore.
A wheel with a center bore larger than 71.6 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 72.6 mm | 72.6 → 71.6 mm |
| 73.1 mm | 73.1 → 71.6 mm |
| 74.1 mm | 74.1 → 71.6 mm |
| 76.1 mm | 76.1 → 71.6 mm |
ANKUSI forged wheels are bored to exactly 71.6 mm for this vehicle, so no ring is needed.
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.