Matte Silver Slotted Turbine Disc Forged Wheels
Monoblock · Matte Silver
2009 Bentley Arnage Final Series Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Bentley Arnage Final Series wheels? This page gives the 2009 Bentley Arnage Final Series bolt pattern (5x120), centre bore, factory rim size and the offset range for aftermarket and forged Bentley Arnage Final Series rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2009 Bentley Arnage Final Series uses a 5x120 bolt pattern with a 72.6 mm centre bore and M14x1.5 lug bolts. Factory wheels: F: 19x8.5J R: 19x8.5J. For aftermarket wheels, 20x9.5J ET15 sits flush and 20x10.0J ET10 is the most aggressive fit.
Forged wheels for the 2009 Bentley Arnage Final Series — drilled 5x120 with a 72.6 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Bentley Arnage Final Series (2009): 5x120 bolt pattern, 72.6mm center bore. Factory wheels: F: 19x8.5J R: 19x8.5J. Reference fitment ranges.
Bolt Pattern5x120
Wheel Bolt/NutM14x1.5 Bolt
Center Bore72.6mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Caliper TypeBrembo multi-piston fixed caliper, front & rear (OEM, standard across Bentley Continental/Flying Spur lineup)
Year2009
CategoryLuxury Sedan
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | F: 19x8.5J R: 19x8.5J |
| Flush Fitment | 20x9.5J at ET15 offset |
| Maximum Aggressive | 20x10.0J at ET10 offset |
Forged Wheel Designs for the Bentley Arnage Final Series
Every design below is forged to order, so it can be machined to the Bentley Arnage Final Series's 5x120 bolt pattern and 72.6 mm center bore, with the width and offset calculated for your setup.
HRE-Style Gloss Black Slotted Disc Floating Cap Forged Wheels
Monoblock · Gloss Black
Polished Mesh Black-Ring Beadlock Forged Wheels
Off-Road Beadlock · Polished
Matte Silver Deep Lip Riveted Forged Wheels
Deep Dish · Matte Silver
BBS-Style Chrome Cross-Lace Mesh Riveted Deep Lip Forged Wheels
2-Piece · Chrome
Gloss Black Multi-Spoke Forged Wheels
Monoblock · Gloss Black
ABL Studios-Style Gloss Black Multi-Spoke Double Ring Floating Cap Forged Wheels
Monoblock · Gloss Black
Forgiato-Style Brushed Silver 5-Spoke Deep Dish 2-Piece Forged Wheels
2-Piece · Brushed Silver
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
The Bentley Arnage Final Series's factory wheel spec reflects a deliberate balance between comfort, steering feel and durability that the engineering team tuned for. Forging lets ANKUSI match that same strength target while trimming rotational mass — the part of a wheel upgrade that actually changes how the car drives, not just how it looks.
The Bentley Arnage Final Series runs a 5x120 bolt pattern, 72.6mm center bore, and a F: 19x8.5J wheel from the factory. Our Flush Fitment reference is 20x9.5J ET15, which tucks the tire under the fender lip on a stock-height Bentley Arnage Final Series. Our Maximum Aggressive reference is 20x10.0J ET10 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Bentley Arnage Final Series OE Wheel Specs
The 2009 Bentley Arnage Final Series (Luxury Sedan) uses a 5x120 bolt pattern with a 72.6mm center bore. Factory wheels are F: 19x8.5J R: 19x8.5J.
Why the factory spec works for most owners:
- Balances ride comfort with everyday fuel efficiency
- A widely used size in this segment, so tire and wheel availability stays strong
- Keeps unsprung weight low for stable, predictable handling
- Maintains clearance for the factory brake calipers and suspension components
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Bentley Arnage Final Series (2009) we drill the 5x120 pattern and cut the centre bore to 72.6mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: F 19x8.5J ET20 → ~5.54″ F backspacing, R 19x8.5J ET20 → ~5.54″ R backspacing
- Flush: 20x9.5J ET15 → ~5.84″ backspacing
- Max: 20x10.0J ET10 → ~5.89″ backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Bentley spec, or want a wheel built to a custom offset for your Bentley Arnage Final Series? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Vehicles With the Same Hub as the Bentley Arnage Final Series (5x120, 72.6 mm Bore)
In our database, 338 other vehicle entries from 10 makes use exactly the same 5x120 bolt pattern and 72.6 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x120 is used by 10.3% of the vehicle pages in our English fitment guide (670 of 6,503); 50.6% of those also use a 72.6 mm center bore.
Hub-Centric Rings for a 72.6 mm Center Bore
A wheel with a center bore larger than 72.6 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 73.1 mm | 73.1 → 72.6 mm |
| 74.1 mm | 74.1 → 72.6 mm |
| 76.1 mm | 76.1 → 72.6 mm |
| 78.1 mm | 78.1 → 72.6 mm |
ANKUSI forged wheels are bored to exactly 72.6 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Bentley Arnage Final Series use?
The 2009 Bentley Arnage Final Series uses a 5x120 bolt pattern.
How many lug bolts does the Bentley Arnage Final Series use?
The Bentley Arnage Final Series uses a 5-lug bolt pattern (5x120), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Bentley Arnage Final Series?
The Bentley Arnage Final Series's center bore is 72.6mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Bentley Arnage Final Series?
Factory wheels on the Bentley Arnage Final Series are F: 19x8.5J R: 19x8.5J.
What is the biggest wheel size I can fit on my Bentley Arnage Final Series without rubbing?
The most aggressive fitment we recommend without fender work is 20x10.0J at ET10 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Bentley Arnage Final Series?
For a flush look with minimal to no rubbing, we recommend 20x9.5J at ET15 offset as a starting point on a stock or mildly lowered Bentley Arnage Final Series.
Do I need wheel spacers for my Bentley Arnage Final Series?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Bentley Arnage Final Series?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 5.84" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Bentley Arnage Final Series?
The Bentley Arnage Final Series runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 19x8.5 wheels · 19 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.