Bentley Continental R Bolt Pattern, Center Bore & Wheel Offset (2000–2003)
Bentley Continental R wheel fitment: 5x154.94 bolt pattern, 117.6mm center bore (2000–2003). OE wheel sizes and offsets for every Continental R variant we cov
- 5x154.94bolt pattern (PCD)
- 117.6 mmcenter bore
- M14x1.5 Boltwheel bolt / nut
- 2 guidesmodel years 2000–2003
Bentley Continental R wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2003 | Bentley Continental R | 5x154.94 | 117.6 mm | 18x8.0J |
| 2000 | Bentley Continental R Mulliner | 5x154.94 | 117.6 mm | 18x8.0J |
Factory wheel sizes on the Bentley Continental R
Across the 2 Bentley Continental R trims with a documented factory wheel, the OE diameter is 18 inch, width 8J. A forged wheel that keeps the 5x154.94 bolt pattern and the 117.6 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Vehicles With the Same Hub as the Bentley Continental R (5x154.94, 117.6 mm Bore)
No other make in our database pairs 5x154.94 with a 117.6 mm center bore, so wheels taken from other brands need a hub-centric ring or a custom bore.
5x154.94 is used by <0.1% of the vehicle entries in our database (6 of 6,503); 100.0% of those also use a 117.6 mm center bore.
Hub-Centric Rings for a 117.6 mm Center Bore
A wheel with a center bore larger than 117.6 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 130.1 mm | 130.1 → 117.6 mm |
ANKUSI forged wheels are bored to exactly 117.6 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Bentley Continental R?
The Bentley Continental R uses a 5x154.94 bolt pattern with a 117.6mm center bore across every Continental R variant in our database (2 guides, 2000–2003).
What is the Bentley Continental R center bore?
The hub-centric center bore is 117.6 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Bentley Continental R years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Bentley Continental R?
Any wheel drilled 5x154.94 with a 117.6mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.