Bentley Azure Bolt Pattern, Center Bore & Wheel Offset (2001–2006)
Bentley Azure wheel fitment: 5x154.94 bolt pattern, 117.6mm center bore (2001–2003); 5x120 bolt pattern, 72.6mm center bore.
- 5x154.94bolt pattern (PCD), most common
- 117.6 mmcenter bore
- M14x1.5 Boltwheel bolt / nut
- 3 guidesmodel years 2001–2006
Bolt pattern by generation
- 5x154.94, 117.6 mm center bore — 2001–2003 (2 variants)
- 5x120, 72.6 mm center bore — 2006 (1 variants)
Bentley Azure wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2006 | Bentley Azure | 5x120 | 72.6 mm | 19x8.5J |
| 2003 | Bentley Azure Final Series | 5x154.94 | 117.6 mm | 18x8.0J |
| 2001 | Bentley Azure | 5x154.94 | 117.6 mm | 18x8.0J |
Factory wheel sizes on the Bentley Azure
Across the 3 Bentley Azure trims with a documented factory wheel, the OE diameter is 18-19 inch, width 8-8.5J. A forged wheel that keeps the bolt pattern and hub bore of your generation (see the table above) and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Vehicles With the Same Hub as the Bentley Azure (5x154.94, 117.6 mm Bore)
No other make in our database pairs 5x154.94 with a 117.6 mm center bore, so wheels taken from other brands need a hub-centric ring or a custom bore.
5x154.94 is used by <0.1% of the vehicle pages in our English fitment guide (6 of 6,503); 100.0% of those also use a 117.6 mm center bore.
Hub-Centric Rings for a 117.6 mm Center Bore
A wheel with a center bore larger than 117.6 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 130.1 mm | 130.1 → 117.6 mm |
ANKUSI forged wheels are bored to exactly 117.6 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Bentley Azure?
The Bentley Azure uses a 5x154.94 bolt pattern on most variants we cover with a 117.6mm center bore. Other generations use 5x120 / 72.6mm (2006–2006). Always check the exact year and trim before ordering.
What is the Bentley Azure center bore?
The hub-centric center bore is 117.6 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Bentley Azure years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Bentley Azure?
Any wheel drilled 5x154.94 with a 117.6mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.