6x114.3 Bolt Pattern Wheels: Fitment Guide
The 6x114.3 bolt pattern (6x4.5 in inches) is used by 36 vehicles in our database: Dodge Viper, Dodge SRT Viper, Nissan Navara, Nissan Frontier and more. Cent
What 6x114.3 Means & What Uses It
6x114.3 means 6 wheel studs or bolts evenly spaced on a 114.3 mm (4.5") circle, written 6x4.5 in inches. In the ANKUSI fitment database it appears on 36 vehicle variants from 6 makes, model years 2001–2027.
Most common makes: Nissan (15), Dodge (15), Nismo (2), Buick (2), Mercedes-Benz (1), Renault (1).
Popular models on 6x114.3: Dodge Viper, Dodge SRT Viper, Nissan Navara, Nissan Frontier, Nissan Pathfinder, Nissan Xterra, Nismo Nissan Frontier, Buick Terraza.
Center bore is not the same across 6x114.3 vehicles: 66.1 mm (15 vehicles), 71.5 mm (13 vehicles), 71.6 mm (2 vehicles), 70.3 mm (2 vehicles). A wheel with the right bolt pattern but the wrong center bore will not seat on the hub — it needs to be machined to the exact bore or used with a hub-centric ring. Check the model page for your exact year before ordering.
Typical fastener: M12x1.25 Nut.
ANKUSI currently lists 2 forged wheel designs drilled 6x114.3, and every design can be machined to 6x114.3 with your vehicle's exact center bore and offset, in 14–24 inch diameters.
6x114.3 Vehicles We Cover (36)
Dodge
Nissan
Buick
Nismo
Mercedes-Benz
Renault
Bolt pattern alone does not guarantee a correct fit — center bore, offset, and load rating still need to be confirmed per vehicle. Check our Fitment Verification Checklist before ordering, or send us your VIN or trim level and we will confirm it for you.
Vehicles Using 6x114.3 With a 66.1 mm Center Bore
In our database, 16 other vehicle entries from 4 makes use exactly the same 6x114.3 bolt pattern and 66.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
6x114.3 is used by 0.5% of the vehicle entries in our database (30 of 6,396); 53.3% of those also use a 66.1 mm center bore.
Hub-Centric Rings for a 66.1 mm Center Bore
A wheel with a center bore larger than 66.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.6 mm | 66.6 → 66.1 mm |
| 67.1 mm | 67.1 → 66.1 mm |
| 70.1 mm | 70.1 → 66.1 mm |
| 70.5 mm | 70.5 → 66.1 mm |
| 73.1 mm | 73.1 → 66.1 mm |
ANKUSI forged wheels are bored to exactly 66.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
← Back to the Bolt Pattern & Wheel Size Guide · Browse by vehicle · Browse forged wheels