KMC Gloss Black Off-Road Machined Face Beadlock Forged Wheels
Off-Road Beadlock · Gloss Black
2005 Nismo Nissan Frontier Crew Cab Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Nismo Nissan Frontier Crew Cab wheels? This page gives the 2005 Nismo Nissan Frontier Crew Cab bolt pattern (6x114.3), centre bore, factory rim size and the offset range for aftermarket and forged Nismo Nissan Frontier Crew Cab rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2005 Nismo Nissan Frontier Crew Cab uses a 6x114.3 bolt pattern with a 66.1 mm centre bore and M12x1.25 lug nuts. Factory wheels: 16x7J ET30. For aftermarket wheels, 17x8J ET20 sits flush.
Forged wheels for the 2005 Nismo Nissan Frontier Crew Cab — drilled 6x114.3 with a 66.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Nismo Nissan Frontier Crew Cab (2005): 6x114.3 bolt pattern, 66.1mm center bore, OE 16x7J ET30. Forged wheel fitment specs from ANKUSI.
Bolt Pattern6x114.3
Wheel Bolt/NutM12x1.25 Nut
Center Bore66.1mm
Wheel Load Rating900–1250 kg/wheel (SUV segment reference)
Year2005
Category6-Lug Off-Road (Beadlock)
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 16x7J ET30 |
| Flush Fitment | 17x8J at ET20 offset |
Forged Wheel Designs for the Nismo Nissan Frontier Crew Cab
Every design below is forged to order, so it can be machined to the Nismo Nissan Frontier Crew Cab's 6x114.3 bolt pattern and 66.1 mm center bore, with the width and offset calculated for your setup.
Rays-Style Bronze TE37 XT 6-Spoke Off-Road Forged Wheels
Off-Road · Bronze
HTOR-Style Gloss Black / Copper 10-Spoke Beadlock Off-Road Forged Wheels
Off-Road Beadlock · Gloss Black / Copper
Patsha Gloss Black Full-Face Forged Wheels
Off-Road · Gloss Black
Matte Black Red-Ring Double-Ring Forged Wheels
Off-Road · Matte Black / Red
Bronze Forged Wheels
Off-Road · Bronze
Black Bear Gloss Black 5-Star Spoke Riveted Off-Road Forged Wheels
Off-Road · Gloss Black
Fuel Gloss Black Red Milled 6-Spoke Off-Road Forged Wheels
Off-Road · Gloss Black Red Milled
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Off-road platforms put real, repeated impact loads through the wheel that street-only vehicles never see, so the factory strength margin on the Nismo Nissan Frontier Crew Cab isn't a formality — it's load-bearing in a literal sense. Forging matches that margin at a lower rotational weight than an equivalent cast wheel, which matters both on the trail and on the highway miles between trailheads.
The Nismo Nissan Frontier Crew Cab ships from the factory on a 6x114.3 bolt pattern with a 66.1mm center bore and a 16x7J ET30 wheel. Our flush reference for the Nismo Nissan Frontier Crew Cab is 17x8J ET20.; our maximum aggressive reference is 18x8.5J ET15. — beyond that, expect clearance issues against the fender liner without further modification.
Nismo Nissan Frontier Crew Cab OE Wheel Specs
The Nismo Nissan Frontier Crew Cab ships from the factory on 6x114.3 bolt pattern wheels with a 66.1mm center bore. The stock wheel size is 16x7J ET30, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Nismo Nissan Frontier Crew Cab (2005) we drill the 6x114.3 pattern and cut the centre bore to 66.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 16x7J | ET30 | 5.18 in (132 mm) | — | — |
| Flush | 17x8J | ET20 | 5.29 in (134 mm) | +3 mm | +23 mm |
| Maximum | 18x8.5J | ET15 | 5.34 in (136 mm) | +4 mm | +34 mm |
Vehicles With the Same Hub as the Nismo Nissan Frontier Crew Cab (6x114.3, 66.1 mm Bore)
In our database, 15 other vehicle entries from 4 makes use exactly the same 6x114.3 bolt pattern and 66.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
6x114.3 is used by 0.5% of the vehicle pages in our English fitment guide (30 of 6,503); 53.3% of those also use a 66.1 mm center bore.
Hub-Centric Rings for a 66.1 mm Center Bore
A wheel with a center bore larger than 66.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 66.6 mm | 66.6 → 66.1 mm |
| 67.1 mm | 67.1 → 66.1 mm |
| 70.1 mm | 70.1 → 66.1 mm |
| 70.5 mm | 70.5 → 66.1 mm |
| 73.1 mm | 73.1 → 66.1 mm |
ANKUSI forged wheels are bored to exactly 66.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Nismo Nissan Frontier Crew Cab use?
The 2005 Nismo Nissan Frontier Crew Cab uses a 6x114.3 bolt pattern.
How many lug bolts does the Nismo Nissan Frontier Crew Cab use?
The Nismo Nissan Frontier Crew Cab uses a 6-lug bolt pattern (6x114.3), so you need a 6-lug forged wheel to bolt straight on.
What is the center bore size on the Nismo Nissan Frontier Crew Cab?
The Nismo Nissan Frontier Crew Cab's center bore is 66.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Nismo Nissan Frontier Crew Cab?
Factory wheels on the Nismo Nissan Frontier Crew Cab are 16x7J ET30.
What does a flush wheel fitment look like on the Nismo Nissan Frontier Crew Cab?
For a flush look with minimal to no rubbing, we recommend 17x8J at ET20 offset as a starting point on a stock or mildly lowered Nismo Nissan Frontier Crew Cab.
Do I need wheel spacers for my Nismo Nissan Frontier Crew Cab?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Nismo Nissan Frontier Crew Cab?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 5.29" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Nismo Nissan Frontier Crew Cab?
The Nismo Nissan Frontier Crew Cab runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com, tirewheelguide.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 16x7 wheels · 16 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.