Wald BMW 7-Series F01 Black Bison (2010) Wheel Fitment
Wald BMW 7-Series F01 Black Bison (2010): 5x120 bolt pattern, 72.6mm center bore, OE F 19x8.5J ET30 / R 19x9.5J ET44. Forged wheel fitment specs from ANKUSI.
✓ Verified by ANKUSI's Engineering Team — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Flush Fitment | F 22x9J ET25 / R 22x10.5J ET35 |
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
A sedan's wheel spec is a balance point the factory tuned between ride comfort, steering feel, and everyday durability. Forging lets us hold that same structural margin while cutting rotational mass, which is where most of the real-world benefit — quicker steering response, marginally better ride — actually comes from.
The Wald BMW 7-Series F01 Black Bison ships from the factory on a 5x120 bolt pattern with a 72.6mm center bore and a F 19x8.5J ET30 / R 19x9.5J ET44 wheel. Our flush reference for the Wald BMW 7-Series F01 Black Bison is F 22x9J ET25 / R 22x10.5J ET35.; our maximum aggressive reference is F 22x9.5J ET20 / R 22x11J ET30. — beyond that, expect clearance issues against the fender liner without further modification.
Wald BMW 7-Series F01 Black Bison OE Wheel Specs
The Wald BMW 7-Series F01 Black Bison ships from the factory on 5x120 bolt pattern wheels with a 72.6mm center bore. The stock wheel size is F 19x8.5J ET30 / R 19x9.5J ET44, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
Flush Fitment
For a flush look without any body modification, most Wald BMW 7-Series F01 Black Bison owners run F 22x9J ET25 / R 22x10.5J ET35. This setup tucks the wheel face closer to the fender lip while staying within safe load and clearance limits.
Maximum Aggressive Fitment
Owners chasing a more aggressive stance push to F 22x9.5J ET20 / R 22x11J ET30. Wald Black Bison body kit; electronic lowering module; 22-inch Wald Portofino wheels; upgraded Brembo brakes; Michelin Pilot Sport 4S (F: 255/30 R22, R: 295/25 R22) tires. Note: Flagship F01 sedan featuring imposing front bumper extensions, rear bumper with integrated diffuser, and quad oval exhaust outlets. Clearance should be verified before ordering, especially on lowered cars.
5-Tier Configuration Options
A – Factory-Style: 19x8.5J ET30
Recommended setup: Factory-matched forged replacement
Economy impact: None
Best for: Daily drivers, warranty-conscious owners
Appearance 5/10 | Comfort 10/10 | Install difficulty ★☆☆☆
Estimated cost range: $$ (OE replacement)
B – Comfortable Upgrade: F 20.5x9J ET28 / R 20.5x10J ET40
Recommended setup: Direct bolt-on, factory suspension
Economy impact: Minimal
Best for: Owners who want a mild upgrade with no compromise
Appearance 6/10 | Comfort 9/10 | Install difficulty ★☆☆☆
Estimated cost range: $$ - $$$
C – Balanced / Flush Fit: F 22x9J ET25 / R 22x10.5J ET35
Recommended setup: Flush forged wheels, stock or mild lowering
Economy impact: Slight increase
Best for: Enthusiasts wanting a flush look daily
Appearance 8/10 | Comfort 7/10 | Install difficulty ★★☆☆
Estimated cost range: $$$
D – Aggressive: F 22x9.5J ET23 / R 22x11J ET33
Recommended setup: Wider forged wheels, coilovers or lowering springs
Economy impact: Noticeable increase
Best for: Show-and-drive builds
Appearance 9/10 | Comfort 5/10 | Install difficulty ★★★☆
Estimated cost range: $$$$
E – Max Aggressive: F 22x9.5J ET20 / R 22x11J ET30
Recommended setup: Wald Black Bison body kit; electronic lowering module; 22-inch Wald Portofino wheels; upgraded Brembo brakes; Michelin Pilot Sport 4S (F: 255/30 R22, R: 295/25 R22) tires. Note: Flagship F01 sedan featuring imposing front bumper extensions, rear bumper with integrated diffuser, and quad oval exhaust outlets.
Economy impact: Significant increase
Best for: Show builds, weekend cars
Appearance 10/10 | Comfort 3/10 | Install difficulty ★★★★
Estimated cost range: $$$$$
Performance Comparison Matrix
| Wheel Spec | Tier A | Tier B | Tier C | Tier D | Tier E |
|---|---|---|---|---|---|
| Wheel Spec | 19x8.5J ET30 | F 20.5x9J ET28 / R 20.5x10J ET40 | F 22x9J ET25 / R 22x10.5J ET35 | F 22x9.5J ET23 / R 22x11J ET33 | F 22x9.5J ET20 / R 22x11J ET30 |
| Economy Impact | None | Minimal | Slight increase | Noticeable increase | Significant increase |
| Appearance | 5/10 | 6/10 | 8/10 | 9/10 | 10/10 |
| Comfort | 10/10 | 9/10 | 7/10 | 5/10 | 3/10 |
| Install Difficulty | ★☆☆☆ | ★☆☆☆ | ★★☆☆ | ★★★☆ | ★★★★ |
| Cost Range | $$ (OE replacement) | $$ - $$$ | $$$ | $$$$ | $$$$$ |
| Best For | Daily drivers, warranty-conscious owners | Owners who want a mild upgrade with no compromise | Enthusiasts wanting a flush look daily | Show-and-drive builds | Show builds, weekend cars |
Real-World Reference Cases
The following builds are compiled from typical ANKUSI customer configurations for this platform and are illustrative, not individually verified real-world builds.
Case 1: Daily Driver (Factory-Style)
Profile: Commuter prioritizing comfort and reliability.
Setup: F 19x8.5J ET30 / R 19x9.5J ET44 forged wheels, factory suspension.
Cost: $$ (OE replacement)
Outcome: No clearance issues, factory ride quality retained.
Case 2: Balanced Enthusiast (Balanced / Flush Fit)
Profile: Weekend driver wanting a flush stance without sacrificing daily usability.
Setup: F 22x9J ET25 / R 22x10.5J ET35 forged wheels.
Cost: $$$
Outcome: Flush fitment with acceptable ride comfort for daily use.
Case 3: Show Build (Max Aggressive)
Profile: Show-and-shine build prioritizing stance over comfort.
Setup: F 22x9.5J ET20 / R 22x11J ET30 forged wheels. Wald Black Bison body kit; electronic lowering module; 22-inch Wald Portofino wheels; upgraded Brembo brakes; Michelin Pilot Sport 4S (F: 255/30 R22, R: 295/25 R22) tires. Note: Flagship F01 sedan featuring imposing front bumper extensions, rear bumper with integrated diffuser, and quad oval exhaust outlets.
Cost: $$$$$
Outcome: Maximum aggressive stance; clearance verified case-by-case.
Decision Guide
Offset & Backspacing Reference
Backspacing is calculated as: wheel width (in) / 2 + offset (mm) / 25.4 + 0.5.
- OE 19x8.5J ET30: backspacing ≈ 5.93"
- Flush 22x9J ET25: backspacing ≈ 5.98"
- Max 22x9.5J ET20: backspacing ≈ 6.04"
Use our offset & backspacing calculator to fine-tune your fitment, or contact ANKUSI for a custom forged wheel quote for your Wald BMW 7-Series F01 Black Bison.