BMW X6 Bolt Pattern, Center Bore & Wheel Offset (2009–2024)
BMW X6 wheel fitment: 5x120 bolt pattern, 74.1mm center bore (2009–2016); 5x112 bolt pattern, 66.6mm center bore (2020–2024). OE wheel sizes and offsets for e
- 5x120bolt pattern (PCD), most common
- 74.1 mmcenter bore
- M14x1.5 Boltwheel bolt / nut
- 14 guidesmodel years 2009–2024
Bolt pattern by generation
- 5x120, 74.1 mm center bore — 2009–2016 (9 variants)
- 5x112, 66.6 mm center bore — 2020–2024 (5 variants)
BMW X6 wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2024 | BMW X6 M Competition F96 | 5x112 | 66.6 mm | 21x10.5J |
| 2024 | BMW X6 M60i G06 | 5x112 | 66.6 mm | 21x9.5J |
| 2020 | BMW X6 G06 | 5x112 | 66.6 mm | 20x9.0J |
| 2020 | BMW X6 M Competition F96 | 5x112 | 66.6 mm | 21x10.5J |
| 2020 | BMW X6 M50i G06 | 5x112 | 66.6 mm | 21x9.5J |
| 2016 | BMW X6 M F86 | 5x120 | 74.1 mm | 20x10.0J |
| 2015 | BMW X6 F16 | 5x120 | 74.1 mm | 19x9.0J |
| 2015 | BMW X6 M Performance Parts F86 | 5x120 | 74.1 mm | 20x10.0J |
| 2014 | BMW X6 M Design Edition E71 | 5x120 | 74.1 mm | 20x10.0J |
| 2013 | BMW X6 E71 | 5x120 | — | — |
| 2013 | BMW X6 M50d E71 | 5x120 | — | — |
| 2010 | BMW X6 M E71 | 5x120 | — | — |
| 2009 | BMW X6 E71 | 5x120 | — | — |
| 2009 | BMW X6 E71 [UK] | 5x120 | — | — |
Factory wheel sizes on the BMW X6
Across the 9 BMW X6 trims with a documented factory wheel, the OE diameter is 19-21 inch, width 9-10.5J. A forged wheel that keeps the bolt pattern and hub bore of your generation (see the table above) and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the BMW X6 (5x120)
Shop all BMW X6 forged wheels →
Vehicles With the Same Hub as the BMW X6 (5x120, 74.1 mm Bore)
In our database, 6 other vehicle entries from 2 makes use exactly the same 5x120 bolt pattern and 74.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x120 is used by 10.3% of the vehicle entries in our database (670 of 6,503); 5.2% of those also use a 74.1 mm center bore.
Hub-Centric Rings for a 74.1 mm Center Bore
A wheel with a center bore larger than 74.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 76.1 mm | 76.1 → 74.1 mm |
| 78.1 mm | 78.1 → 74.1 mm |
| 84.1 mm | 84.1 → 74.1 mm |
| 93.1 mm | 93.1 → 74.1 mm |
ANKUSI forged wheels are bored to exactly 74.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a BMW X6?
The BMW X6 uses a 5x120 bolt pattern on most variants we cover with a 74.1mm center bore. Other generations use 5x112 / 66.6mm (2020–2024). Always check the exact year and trim before ordering.
What is the BMW X6 center bore?
The hub-centric center bore is 74.1 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all BMW X6 years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the BMW X6?
Any wheel drilled 5x120 with a 74.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.