BMW M6 Bolt Pattern, Center Bore & Wheel Offset (2005–2016)
BMW M6 wheel fitment: 5x120 bolt pattern, 72.6mm center bore (2005–2016). OE wheel sizes and offsets for every M6 variant we cover (10 guides), plus flush and
- 5x120bolt pattern (PCD)
- 72.6 mmcenter bore
- M12x1.5 Boltwheel bolt / nut
- 10 guidesmodel years 2005–2016
BMW M6 wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2016 | BMW M6 Coupe Competition Edition F13 | 5x120 | 72.6 mm | 20x9.5J |
| 2015 | BMW M6 Coupe F13 | 5x120 | 72.6 mm | 19x9.5J |
| 2014 | BMW M6 Coupe Competition Package F13 | 5x120 | 72.6 mm | 20x9.5J |
| 2014 | BMW M6 Gran Coupe F06 | 5x120 | 72.6 mm | 20x9.5J |
| 2013 | BMW M6 Convertible F12 | 5x120 | 72.6 mm | 19x9.5J |
| 2013 | BMW M6 Coupe F13 | 5x120 | 72.6 mm | 19x9.5J |
| 2013 | BMW M6 Coupe F13 [US] | 5x120 | 72.6 mm | 19x9.5J |
| 2007 | BMW M6 Cabrio E64 | 5x120 | 72.6 mm | 19x8.5J |
| 2007 | BMW M6 Convertible Neiman Marcus E64 | 5x120 | 72.6 mm | 19x8.5J |
| 2005 | BMW M6 E63 | 5x120 | 72.6 mm | 19x8.5J |
Factory wheel sizes on the BMW M6
Across the 10 BMW M6 trims with a documented factory wheel, the OE diameter is 19-20 inch, width 8.5-9.5J. A forged wheel that keeps the 5x120 bolt pattern and the 72.6 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the BMW M6 (5x120)
Shop all BMW M6 forged wheels →
Vehicles With the Same Hub as the BMW M6 (5x120, 72.6 mm Bore)
In our database, 91 other vehicle entries from 9 makes use exactly the same 5x120 bolt pattern and 72.6 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x120 is used by 10.3% of the vehicle entries in our database (670 of 6,503); 50.6% of those also use a 72.6 mm center bore.
Hub-Centric Rings for a 72.6 mm Center Bore
A wheel with a center bore larger than 72.6 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 73.1 mm | 73.1 → 72.6 mm |
| 74.1 mm | 74.1 → 72.6 mm |
| 76.1 mm | 76.1 → 72.6 mm |
| 78.1 mm | 78.1 → 72.6 mm |
ANKUSI forged wheels are bored to exactly 72.6 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a BMW M6?
The BMW M6 uses a 5x120 bolt pattern with a 72.6mm center bore across every M6 variant in our database (10 guides, 2005–2016).
What is the BMW M6 center bore?
The hub-centric center bore is 72.6 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all BMW M6 years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the BMW M6?
Any wheel drilled 5x120 with a 72.6mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.