Aston Martin Wheel Fitment Guide

153 fitment guides for Aston Martin, covering 1986 to 2026, spanning 4x100, 5x108, 5x114.3, 5x120.65 and 5x128 bolt patterns. Browse the full list below, then open a model for bolt pattern, center bore, OE offset, flush and max wheel sizes, and offset/backspacing conversions.

Run a Aston Martin club, forum or blog? Add our free bolt pattern and center bore lookup to your site, set to open on Aston Martin only. Get the free embed code →

Aston Martin Bolt Pattern & Center Bore Notes

Based on the 154 Aston Martin fitment guides we cover, we have documented 5 distinct bolt pattern / center bore combinations across different Aston Martin platforms and model years:

  • 5x128 bolt pattern, 75.1mm center bore — 82 models we cover, spanning 2010–2026.
  • 5x114.3 bolt pattern, 68.1mm center bore — 47 models we cover, spanning 2004–2018.
  • 5x120.65 bolt pattern, 73.8mm center bore — 20 models we cover, spanning 1986–2016.
  • 5x108 bolt pattern, 63.4mm center bore — 2 models we cover, spanning 2001–2004.
  • 4x100 bolt pattern, 54.1mm center bore — 2 models we cover, spanning 2012.

Do not mix platforms: a wheel forged for one Aston Martin bolt pattern / center bore combination will not hub-center correctly on a different one, even if the diameter looks right. Always confirm your exact model and year against the bolt pattern and center bore listed on that model page below before ordering — or send us your VIN or trim level and we will confirm it for you.

Offset and backspacing recommendations vary by trim even within the same bolt pattern, mainly due to differences in brake caliper size and suspension geometry between base and performance trims. Every ANKUSI wheel is forged to your exact target offset, so send us your Aston Martin model, year, and trim and we will confirm the correct spec before production — no guessing required.

How to check the bolt pattern on your Aston Martin

The most common Aston Martin fitment in our guide is 5x128 with a 75.1 mm center bore (82 of 154 model years we cover).

  1. Read the stamping on the back of an original wheel: size, offset (ET) and bolt pattern are usually cast into a spoke or the hub pad.
  2. No stamping? Measure center-to-center between two adjacent lug holes. For 5x128 that distance is 75.2 mm (PCD × sin(180° / 5)). A 2 mm difference already means a different bolt pattern.
  3. Match generation and year on the model pages below — the same nameplate can change bolt pattern or center bore between generations.

Changing width or offset? Check how far the wheel moves in or out with our offset & backspacing calculator.

5x128 / 75.1mm center bore

5x114.3 / 68.1mm center bore

Forged Wheels for Aston Martin

Forged-to-order wheel designs matched to Aston Martin bolt patterns. Every set is machined to your exact model, offset and center bore.

Vehicles Using 5x128 With a 75.1 mm Center Bore

No other make in our database pairs 5x128 with a 75.1 mm center bore, so wheels taken from other brands need a hub-centric ring or a custom bore.

5x128 is used by 1.2% of the vehicle pages in our English fitment guide (78 of 6,503); 100.0% of those also use a 75.1 mm center bore.

Hub-Centric Rings for a 75.1 mm Center Bore

A wheel with a center bore larger than 75.1 mm needs a hub-centric ring. The most common combinations:

Wheel boreRing size
76.1 mm76.1 → 75.1 mm
78.1 mm78.1 → 75.1 mm
84.1 mm84.1 → 75.1 mm
93.1 mm93.1 → 75.1 mm

ANKUSI forged wheels are bored to exactly 75.1 mm for this vehicle, so no ring is needed.

Sources and Last Update

Bolt pattern and center bore were checked against at least two independent fitment references before publication.

This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).

Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.

← Back to the full Fitment Guide · Browse forged wheels

Contact WhatsApp Get a Quote