Aston Martin OEM-Style Gloss Black 10 Y-Spoke Machined Face Forged Wheels
Monoblock · Gloss Black
2026 Aston Martin Vanquish Volante Wave Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Aston Martin Vanquish Volante Wave wheels? This page gives the 2026 Aston Martin Vanquish Volante Wave bolt pattern (5x128), centre bore, factory rim size and the offset range for aftermarket and forged Aston Martin Vanquish Volante Wave rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2026 Aston Martin Vanquish Volante Wave uses a 5x128 bolt pattern with a 75.1 mm centre bore and M14x1.5 lug nuts. Factory wheels: F: 21x10.0J R: 21x11.5J. For aftermarket wheels, 21x10.5J ET32 front / 21x12.0J ET38 rear sits flush and 22x11.0J ET28 front / 22x12.5J ET32 rear is the most aggressive fit.
Forged wheels for the 2026 Aston Martin Vanquish Volante Wave — drilled 5x128 with a 75.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Aston Martin Vanquish Volante Wave (2026): 5x128 bolt pattern, 75.1mm center bore. Factory wheels: F: 21x10.0J R: 21x11.5J. Reference fitment ranges.
Bolt Pattern5x128
Wheel Bolt/NutM14x1.5 Nut
Center Bore75.1mm
Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)
Caliper TypeBrembo 4- or 6-piston fixed caliper (OEM, standard across Aston Martin lineup, iron-rotor variants)
Year2026
CategoryLuxury Convertible
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | F: 21x10.0J R: 21x11.5J |
| Flush Fitment | F 21x10.5J ET32 / R 21x12.0J ET38 |
| Maximum Aggressive | F 22x11.0J ET28 / R 22x12.5J ET32 |
Forged Wheel Designs for the Aston Martin Vanquish Volante Wave
Every design below is forged to order, so it can be machined to the Aston Martin Vanquish Volante Wave's 5x128 bolt pattern and 75.1 mm center bore, with the width and offset calculated for your setup.
Aston Martin OEM-Style Gloss Black 10 Y-Spoke Forged Wheels
Monoblock · Gloss Black
Matte Silver Forged Wheels
Monoblock · Matte Silver
Chrome 5 Split-Spoke Forged Wheels
Monoblock · Chrome
Advan-Style Bronze 5-Spoke Forged Wheels
Monoblock · Bronze
Geely Xingrui L Plus Forged Wheels
Monoblock
Rohana-Style Bronze 10 Directional-Spoke Forged Wheels
Monoblock · Bronze
Gloss Black 5 W-Spoke Forged Wheels
Monoblock · Gloss Black
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Convertibles lose some of the structural rigidity a fixed roof provides, which means the suspension and wheels end up doing more of the work to keep the chassis composed. A forged wheel keeps unsprung mass down without sacrificing the strength margin the factory built in — useful on a platform that's already managing extra flex.
The Aston Martin Vanquish Volante Wave runs a 5x128 bolt pattern, 75.1mm center bore, and a F: 21x10.0J wheel from the factory. Our Flush Fitment reference is F 21x10.5J ET32 / R 21x12.0J ET38, which tucks the tire under the fender lip on a stock-height Aston Martin Vanquish Volante Wave. Our Maximum Aggressive reference is F 22x11.0J ET28 / R 22x12.5J ET32 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Aston Martin Vanquish Volante Wave OE Wheel Specs
The 2026 Aston Martin Vanquish Volante Wave (Luxury Convertible) uses a 5x128 bolt pattern with a 75.1mm center bore. Factory wheels are F: 21x10.0J R: 21x11.5J.
Why the factory spec works for most owners:
- Preserves the factory-tuned ride and steering feel
- A mainstream size for this segment, keeping tire choice wide and prices reasonable
- Leaves full clearance for the stock brakes and suspension hardware
- Keeps handling predictable and consistent in everyday conditions
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Aston Martin Vanquish Volante Wave (2026) we drill the 5x128 pattern and cut the centre bore to 75.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: F 21x10.0J ET38 → ~7″ F backspacing, R 21x11.5J ET45 → ~8.02″ R backspacing
- Flush: F 21x10.5J ET32 → ~7.01″ F backspacing, R 21x12.0J ET38 → ~8″ R backspacing
- Max: F 22x11.0J ET28 → ~7.1″ F backspacing, R 22x12.5J ET32 → ~8.01″ R backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Aston Martin spec, or want a wheel built to a custom offset for your Aston Martin Vanquish Volante Wave? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Vehicles With the Same Hub as the Aston Martin Vanquish Volante Wave (5x128, 75.1 mm Bore)
In our database, 77 other Aston Martin entries use exactly the same 5x128 bolt pattern and 75.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x128 is used by 1.2% of the vehicle pages in our English fitment guide (78 of 6,503); 100.0% of those also use a 75.1 mm center bore.
Hub-Centric Rings for a 75.1 mm Center Bore
A wheel with a center bore larger than 75.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 76.1 mm | 76.1 → 75.1 mm |
| 78.1 mm | 78.1 → 75.1 mm |
| 84.1 mm | 84.1 → 75.1 mm |
| 93.1 mm | 93.1 → 75.1 mm |
ANKUSI forged wheels are bored to exactly 75.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Aston Martin Vanquish Volante Wave use?
The 2026 Aston Martin Vanquish Volante Wave uses a 5x128 bolt pattern.
How many lug bolts does the Aston Martin Vanquish Volante Wave use?
The Aston Martin Vanquish Volante Wave uses a 5-lug bolt pattern (5x128), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Aston Martin Vanquish Volante Wave?
The Aston Martin Vanquish Volante Wave's center bore is 75.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Aston Martin Vanquish Volante Wave?
Factory wheels on the Aston Martin Vanquish Volante Wave are F: 21x10.0J R: 21x11.5J.
What is the biggest wheel size I can fit on my Aston Martin Vanquish Volante Wave without rubbing?
The most aggressive fitment we recommend without fender work is F 22x11.0J ET28 / R 22x12.5J ET32. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Aston Martin Vanquish Volante Wave?
For a flush look with minimal to no rubbing, we recommend F 21x10.5J ET32 / R 21x12.0J ET38 as a starting point on a stock or mildly lowered Aston Martin Vanquish Volante Wave.
Do I need wheel spacers for my Aston Martin Vanquish Volante Wave?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Aston Martin Vanquish Volante Wave?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 7.01" backspacing up front and 8" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Aston Martin Vanquish Volante Wave?
Yes — the Aston Martin Vanquish Volante Wave's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 21x10 wheels · 21 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.