Aston Martin Vantage AMR Bolt Pattern, Center Bore & Wheel Offset (2018–2020)
Aston Martin Vantage AMR wheel fitment: 5x128 bolt pattern, 75.1mm center bore; 5x114.3 bolt pattern, 68.1mm center bore. OE wheel sizes and offsets for every
- 5x128bolt pattern (PCD), most common
- 75.1 mmcenter bore
- M14x1.5 Nutwheel bolt / nut
- 3 guidesmodel years 2018–2020
Bolt pattern by generation
- 5x128, 75.1 mm center bore — 2020 (1 variants)
- 5x114.3, 68.1 mm center bore — 2018 (1 variants)
Aston Martin Vantage AMR wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2020 | Aston Martin Vantage AMR | 5x128 | 75.1 mm | 20x9.0J |
| 2018 | Aston Martin Vantage AMR | 5x114.3 | 68.1 mm | 19x8.5J |
| 2018 | Aston Martin Vantage AMR Pro | — | — | — |
Factory wheel sizes on the Aston Martin Vantage AMR
Across the 2 Aston Martin Vantage AMR trims with a documented factory wheel, the OE diameter is 19-20 inch, width 8.5-9J. A forged wheel that keeps the bolt pattern and hub bore of your generation (see the table above) and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Aston Martin Vantage AMR (5x128)
Shop all Aston Martin Vantage AMR forged wheels →
Get a quote for Aston Martin Vantage AMR wheels
Vehicles With the Same Hub as the Aston Martin Vantage AMR (5x128, 75.1 mm Bore)
No other make in our database pairs 5x128 with a 75.1 mm center bore, so wheels taken from other brands need a hub-centric ring or a custom bore.
5x128 is used by 1.2% of the vehicle entries in our database (78 of 6,396); 100.0% of those also use a 75.1 mm center bore.
Hub-Centric Rings for a 75.1 mm Center Bore
A wheel with a center bore larger than 75.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 76.1 mm | 76.1 → 75.1 mm |
| 78.1 mm | 78.1 → 75.1 mm |
| 84.1 mm | 84.1 → 75.1 mm |
| 93.1 mm | 93.1 → 75.1 mm |
ANKUSI forged wheels are bored to exactly 75.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Aston Martin Vantage AMR?
The Aston Martin Vantage AMR uses a 5x128 bolt pattern on most variants we cover with a 75.1mm center bore. Other generations use 5x114.3 / 68.1mm (2018–2018). Always check the exact year and trim before ordering.
What is the Aston Martin Vantage AMR center bore?
The hub-centric center bore is 75.1 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Aston Martin Vantage AMR years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Aston Martin Vantage AMR?
Any wheel drilled 5x128 with a 75.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.