Aston Martin DB9 Volante Bolt Pattern, Center Bore & Wheel Offset (2004–2013)
Aston Martin DB9 Volante wheel fitment: 5x114.3 bolt pattern, 68.1mm center bore (2004–2013). OE wheel sizes and offsets for every DB9 Volante variant we cove
- 5x114.3bolt pattern (PCD)
- 68.1 mmcenter bore
- M14x1.5 Nutwheel bolt / nut
- 4 guidesmodel years 2004–2013
Aston Martin DB9 Volante wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2013 | Aston Martin DB9 Volante | 5x114.3 | 68.1 mm | 20x8.5J |
| 2009 | Aston Martin DB9 Volante | 5x114.3 | 68.1 mm | 19x8.5J |
| 2007 | Aston Martin DB9 Volante | 5x114.3 | 68.1 mm | 19x8.5J |
| 2004 | Aston Martin DB9 Volante | 5x114.3 | 68.1 mm | 19x8.5J |
Factory wheel sizes on the Aston Martin DB9 Volante
Across the 4 Aston Martin DB9 Volante trims with a documented factory wheel, the OE diameter is 19-20 inch, width 8.5J. A forged wheel that keeps the 5x114.3 bolt pattern and the 68.1 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Aston Martin DB9 Volante (5x114.3)
Shop all Aston Martin DB9 Volante forged wheels →
Get a quote for Aston Martin DB9 Volante wheels
Vehicles With the Same Hub as the Aston Martin DB9 Volante (5x114.3, 68.1 mm Bore)
In our database, 42 other vehicle entries from 4 makes use exactly the same 5x114.3 bolt pattern and 68.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.0% of the vehicle entries in our database (1,300 of 6,503); 6.0% of those also use a 68.1 mm center bore.
Hub-Centric Rings for a 68.1 mm Center Bore
A wheel with a center bore larger than 68.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 70.1 mm | 70.1 → 68.1 mm |
| 70.5 mm | 70.5 → 68.1 mm |
| 71.6 mm | 71.6 → 68.1 mm |
| 72.6 mm | 72.6 → 68.1 mm |
| 73.1 mm | 73.1 → 68.1 mm |
ANKUSI forged wheels are bored to exactly 68.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Aston Martin DB9 Volante?
The Aston Martin DB9 Volante uses a 5x114.3 bolt pattern with a 68.1mm center bore across every DB9 Volante variant in our database (4 guides, 2004–2013).
What is the Aston Martin DB9 Volante center bore?
The hub-centric center bore is 68.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Aston Martin DB9 Volante years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Aston Martin DB9 Volante?
Any wheel drilled 5x114.3 with a 68.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.