Aston Martin Vanquish Volante Bolt Pattern, Center Bore & Wheel Offset (2014–2026)
Aston Martin Vanquish Volante wheel fitment: 5x128 bolt pattern, 75.1mm center bore (2014–2026). OE wheel sizes and offsets for every Vanquish Volante variant
- 5x128bolt pattern (PCD)
- 75.1 mmcenter bore
- M14x1.5 Nutwheel bolt / nut
- 4 guidesmodel years 2014–2026
Aston Martin Vanquish Volante wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2026 | Aston Martin Vanquish Volante | 5x128 | 75.1 mm | 21x10.0J |
| 2026 | Aston Martin Vanquish Volante Wave | 5x128 | 75.1 mm | 21x10.0J |
| 2015 | Aston Martin Vanquish Volante | 5x128 | 75.1 mm | 20x8.5J |
| 2014 | Aston Martin Vanquish Volante | 5x128 | 75.1 mm | 20x8.5J |
Factory wheel sizes on the Aston Martin Vanquish Volante
Across the 4 Aston Martin Vanquish Volante trims with a documented factory wheel, the OE diameter is 20-21 inch, width 8.5-10J. A forged wheel that keeps the 5x128 bolt pattern and the 75.1 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Vehicles With the Same Hub as the Aston Martin Vanquish Volante (5x128, 75.1 mm Bore)
No other make in our database pairs 5x128 with a 75.1 mm center bore, so wheels taken from other brands need a hub-centric ring or a custom bore.
5x128 is used by 1.2% of the vehicle entries in our database (78 of 6,503); 100.0% of those also use a 75.1 mm center bore.
Hub-Centric Rings for a 75.1 mm Center Bore
A wheel with a center bore larger than 75.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 76.1 mm | 76.1 → 75.1 mm |
| 78.1 mm | 78.1 → 75.1 mm |
| 84.1 mm | 84.1 → 75.1 mm |
| 93.1 mm | 93.1 → 75.1 mm |
ANKUSI forged wheels are bored to exactly 75.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Aston Martin Vanquish Volante?
The Aston Martin Vanquish Volante uses a 5x128 bolt pattern with a 75.1mm center bore across every Vanquish Volante variant in our database (4 guides, 2014–2026).
What is the Aston Martin Vanquish Volante center bore?
The hub-centric center bore is 75.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Aston Martin Vanquish Volante years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Aston Martin Vanquish Volante?
Any wheel drilled 5x128 with a 75.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.